• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.421-427
• /
• 2015

This study aims at reviewing first the cases of marine accidents of small fishing vessels and vessels towing and being towed and, the problems concerning such lights and shapes that could be misunderstood for those in concerned Rules, or that could impair their distinctive characteristics or obstruct to keep a proper look-out. And then I wish to make a suggestion of the necessity of amending the National Laws which stipulate the rules for the ship's lights and shapes as follows; Firstly, by amending the "Standard of Construction and Equipment for the Less Than 10 Gross Tonnage of Small Fishing Vessels" small fishing vessel must be equipped with the lights and shapes that are the same as those of "vessel engaged in fishing" prescribed by Rule 26 of the "COLREG 1972" and Rule 84 of the "Maritime Safety Law Act". Secondly, "Standard of Fishing Vessels Equipment" which stipulate the rules concerning the exception of the running lights and radar reflector for the small fishing vessels must be amended to meet the requirement of Rule 20 of the "Maritime Safety Act". Thirdly, the definition of "Length of the tow" which prescribed by Rule 2 of the "Maritime Safety Act" must be amended to meet the Rule 24 of the "COLREG 1972". And also I wish to adhere to the importance of displaying the adequate vessel lights and shapes by every mariner for preventing marine accidents.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.2
• /
• pp.82-89
• /
• 2023

Due to the characteristics of ship structure, the compartment structure is complicated and narrow, so safety accidents frequently occur during the work process. The main causes of accidents include structural collisions, falling objects, toxic substance leaks, fires, explosions, asphyxiation, and more. Understanding the on-site conditions of workers during accidents is crucial for mitigating damages. In order to ensure safety, the on-site situation is monitored using CCTV in the ship, but it is difficult to prevent accidents with the existing method. To address this issue, a smart safety helmet equipped with location identification and voice/video communication capabilities is being developed as a safety technology. Additionally, the smart safety helmet incorporates environmental sensors for temperature, humidity, vibration, noise, tilt (gyro sensor), and gas detection within the work area. These sensors can notify workers wearing the smart safety helmet of hazardous situations. By utilizing the smart safety helmet and environmental sensors, the safety of workers aboard ships can be enhanced.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.237-243
• /
• 2019

Floating platforms made of PE (PolyEthylene) are often located in shallows of seas, rivers or lakes. They are widely used for marine pensions, marine pontoons, marine bridges, etc. These products are characterized by good flexibility, recyclability, chemical resistance and weatherability with corrosion resistance. Existing PE floating platforms have a simple structure in which one pipe is fastened to one bracket, but this has limited application, even if a user modifies the arrangement. Therefore, we developed a structure that allows buoyancy pipes of various sizes to be fastened to one bracket and verified the structural safety of the product using the finite element method. From the results of structural analysis for buoyancy pipes of different diameters, the maximum stress ratio was 0.78 compared with allowable criteria of 1.0, which represented sufficient safety for a model with 500 mm diameter pipes. Based on the results of this study, further research to evaluate the structural safety of various floating platforms can be carried out in the further; it will also be necessary to establish related evaluation criteria.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.119-121
• /
• 2013

최근 대규모 선박 및 해양플랜트 사고 발생을 계기로 각국의 정부와 관련 업계에서는 안전사고 예방을 위한 규제를 강화하고 기업차원의 안전관리도 철저히 점검하고 있다. 선박사고의 경우에는 1989년 "엑슨발데스호" 사고를 계기로 국제해사기구(IMO) 주도하에 유조선의 "2중 선체 의무화"를 추진했으며, 2012년에는 전 세계적으로 공식 시행되고 있다. 해양플랜트 사고의 경우에는 1988년 북해(North Sea)에서 발생한 Piper Alpha 폭발사고를 계기로 인적요인에 대한 관심이 높아졌으며, 2010년 멕시코만에서 발생한 "딥워터호라이즌호" 사고 이후 시추작업에 대한 안전점검과 인적오류 예방 및 관리를 위한 훈련을 강화하고 있다(배영일, 2012). 일반적으로 해양플랜트 사고의 원인은 구조물 자체의 오류가 20%이하이며, 예기치 못한 작업자의 행동으로 발생된 사고가 80% 이상을 차지하고 있다. 즉, 대부분의 사고는 operation 또는 maintenance 동안 발생하는 것으로 나타나고 있다. 본 발표에서는 해양플랜트 산업에서의 사고와 관련된 최근 연구현황 및 향후 연구 방향을 소개하고자 한다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.4
• /
• pp.336-344
• /
• 2007

A method is developed to evaluate partial safety factors for armor units, by which uncertainties of random variables in reliability function as well as wave height distribution with service periods could take into account straightforwardly. It is found that partial safety factors for resistance and wave height are correctly increased with improving target levels on failure of coastal structures at the same return and service periods. Therefore, it nay be possible to determine design variables through the same processes as those of deterministic method by using the partial safety factors for resistance and wave height evaluated in this paper, since uncertainties of random variables and the effects of service periods and target probability failure are directly considered in the processes of evaluation of partial safety factors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.791-799
• /
• 2022

Among excursion and ferry boats, small boats with a length of less than 12 m are exempted from the stability standard according to the ship safety act. The boarding capacity of these small excursion and ferry boats is calculated by the seating area according to the excursion ship and ferry business act. Many excursion and ferry boats have installed deck structures such as awnings after launching. Therefore, this study attempted to analyze the cause of the accident by estimating the stability based on the case of an actual ferry boat capsizing accident. The analysis results indicated that passengers stood up to disembark at the same time while the boarding capacity was exceeded. However, even if the ferry boat complied with the boarding capacity, a possibility of capsize existed if the passengers on one side of the boat stood up. Therefore, the following were suggested to improve the safety: calculating the boarding capacity using the stability test and recommending the maximum total weight for the boarding capacity.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.245-253
• /
• 2019

Beach lifeguards in Korea are unprepared to perform the rescue and safety management for individuals with disabilities. There is no lifeguard training that offers information regarding the rescue of individuals with disabilities. The purpose of the study was to conduct literature review and determine significant issues related to beach lifeguard and provide suggestions for lifeguard training programs and water safety for individuals with disabilities. Databases (i.e., CINAHL Plus with Full Text, ERIC, MEDLINE, SPORTDiscus with Full Text) were used to search research articles and organizational documents. To find relevant documents, search terms such as water safety, lifeguard, drown prevention were used. Data were content analyzed to identify key issues. Based on the literature review, five critical issues regarding rescue of individuals with disabilities, drown prevention, and water safety were drawn and discussed in the article.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.604-610
• /
• 2018

Recently, due to the rapid growth of the leisure industry, demand for small-scale flotation and mooring pontoon platforms has been increasing rapidly. Standard rules for the design and structural safety of such structures have become necessary. This paper provides criteria that can be referenced when designing pontoon platforms, and also introduces structural safety evaluation procedures. In this study, the structural safety and stability of a 15-meter pontoon platform were investigated through structural design and finite element analysis. For platforms of less than 10 meters in length, a simple structural calculation can be used, but for platforms over 10 meters, a detailed structural strength review must be considered to meet safety guidelines defined in existing regulations. The structural strength of the initial design was examined and its structural safety was verified. For future research, it is an evaluative system was developed that can be used to examine the various loading conditions during design.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.151-156
• /
• 2004

최근 국내외에서 국제무역 물량의 증대에 따라 대규모 항만 건설 공사가 진행되고 있으며, 이에 경제성, 시공성이 뛰어난 Caisson 형식의 구조물이 많이 사용되어지고 있다. 특히 항만 및 어항의 외곽시설인 방파제는 계류선박의 안전과 하역 및 적화를 용이하게 하는 중요한 구조물이다. 따라서, 본 연구에서는 Caisson식 방파제에 태풍, 충격력과 같은 몇 가지 외력 조건에 대하여 구조 해석을 실시하여 손상메커니즘을 분석하였다 이러한 손상 메커니즘에 따라 손상을 인위적으로 발생시켜 손상 위치 탐색을 수행하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.372-380
• /
• 2015

In order to study the characteristics of physical environment in water column around the artificial upwelling structure, CTD and currents measurements were carried out along line observations. Before installation of artificial upwelling structure was installed, the stratification of water column existed 30m in water depth. After installation of artificial upwelling structure, however, stratification formation depth and strength changed depending on currents directions. It seems that the change of stratification has a close relation with upwelling of lower temperature water. After installing the artificial upwelling structure, the distributions of vertical flows were analyzed. Local upwelling and downwelling flows showed a distinct time and spacial changes. Local upwelling flows caused by artificial upwelling structure appeared 100 times larger than coastal upwelling in the South-East Sea of Korea. Upwelling flows generated by the artificial structure raised the high concentration of nutrients to upper layer from lower layer breaking stratification in the summer. Thus, upwelling structure plays an important role for vertical water circulation improving the food environments by increasing primary production.