• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.500-509
• /
• 2021

This study investigated the characteristics of a macrobenthos community and sediment environment and assessed the health of tidal flats along the west coast of Korea. A survey was conducted from Ganghwa-do to Mokpo, Jeollanam-do in April (spring) and August (summer) 2017, and April (spring) 2018. The sediment grain sizes in the Chungcheongnam-do region were coarser, and the sediment in the Gyeonggi-do·Incheon, Jeollanam-do, and Jeollabuk-do regions were finer. A total of 140 macrobenthic species were collected from this study and using a cluster similarity analysis of the macrobenthos community, they were divided into four groups. Group2 was associated with Manila clam farm stations, and Ruditapes phillipinarum, Nephtys polybranchia and Lumbrineris nipponica were dominant. Group4 included some sites with finer sediment composed relatively, and Eteone longa and Nemertea unid. appeared at a high frequency. From the health assessment of the western tidal flat, the ISEP and BHI indices had a "High status," and the AMBI index had a "Good status." In conclusion, the tidal flats along the west coast of Korea have good ecological health. However, pollution indicator species such as Theora lata and Capitella capitata have appeared in some areas. Therefore, periodic administration and interventions are necessary to prevent deterioration of the tidal flat environment.

• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.276-290
• /
• 2020

Purpose: The construction history of domestic port facilities has been more than 100 years, and until recently, modern facilities have been continuously built and expanded. However, it is not easy to keep the required performance conditions at the time of initial construction due to changes in the marine environment and increase in volume. In particular, in the case of harbor structures that have a long service life, safety performance and function management are becoming very important due to the increase in the size of ships, the increasing frequency of use, and the increase in the scale of natural disasters. Method: Therefore, this study investigates the state change by structural type of port facilities and analyzes the rehabilitation activities and the history that contribute to the performance improvement and life extension activities. Result: Through this, we distinguished between performance improvement cost (CAPEX) and repair maintenance activity (OPEX) that can be used to establish port facility maintenance strategy, and suggested cost model that can be used to establish maintenance strategy. Conclusion: These studies are expected to contribute greatly to mid- to long-term investment decisions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.120-120
• /
• 2019

국내에서는 예측 불가능한 재난으로 인한 침수 피해 발생사례가 증가하였다. 따라서 침수 피해 예측이 더욱 중요해지고 있는 실정이다. 기존에는 주로 수치모형을 통한 침수예측을 하였고, 정보통신기술도 발달해왔지만 아직까지 수치모의에 많은 시간이 소요되기 때문에 침수 피해의 실시간 예측이 힘든 상황이다. 이에 국립재난안전연구원(2017)에서 침수예측을 위한 보간 모델인 SIND(Scientific Interpolation for Natural Disaster) Model을 개발하였다. 이는 보간을 이용한 모델이기 때문에 그동안 사용해왔던 물리 모형보다 간단하다. 그러나 정확한 값이 아닌 보간을 이용한 모델이기 때문에 정확도를 검토할 필요가 있다. 따라서 본 연구에서는 Mapping분야에서 사용하는 CRITIC(CRiteria Importance Through Intercriteria Correlation) 기법을 활용하여 지도의 정확도 검토를 수행하였다. CRITIC은 형상기준, 위치기준, 면적기준을 이용하여 형상유사도를 산정하는 방법이며, 이 기법을 활용하여 국가가 제공한 침수예상도(국립해양조사원, 2010)와 SIND모델 결과 지도를 비교하였다. 형상기준은 지도의 형상을 나타내는 형상지수를 비교하고, 위치기준은 지도의 무게중심의 일치정도, 면적기준은 형상 면적을 비교하는 것이다. 지도는 총 300여개의 매칭 객체 쌍을 가지고 수행하였고, 위험도 등급은 Grade 1부터 Grade 5 까지 분류하여 나타내었다. 연구 대상지역은 ${{\bigcirc}{\bigcirc}}$시이다. 그 결과, 형상유사도는 약 200여개의 매체쌍이 0.80 이상의 값을 나타냈고, 나머지 매체 쌍은 0.75이하의 값을 나타내었다. 위험도 등급이 낮을수록 형상유사도 값은 크게 나타나고, 위험도 등급이 높을수록 형상유사도 값이 작게 나타나는 경향을 보였다. 이는 위험도 등급이 높은 곳의 경우, 해안선의 복잡한 지형형태 때문으로 판단된다. Mapping 분야에서 형상유사도 적합성 기준이 0.75이므로 결과는 60%이상이 정확하다고 판단할 수 있다. 따라서 본 연구에서 검토를 수행했던 간단한 방정식을 이용한 SIND 모델은 정확하다고 판단할 수 있다. 다만, 복잡한 지형과 현재 고려되고 있는 영향인자 외에 다양한 구조물 등을 고려한다면 형상유사도가 향상될 것이라 기대된다.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.6
• /
• pp.51-61
• /
• 2006

An efficient and accurate hybrid reliability analysis method is proposed in this paper to quantify the risk of an axially loaded single pile considering pile-soil interaction behavior and uncertainties in various design variables. The proposed method intelligently integrates the concepts of the response surface method, the finite difference method, the first-order reliability method, and the iterative linear interpolation scheme. The load transfer method is incorporated into the finite difference method for the deterministic analysis of a single pile-soil system. The uncertainties associated with load conditions, material and section properties of a pile and soil properties are explicitly considered. The risk corresponding to both serviceability limit state and strength limit state of the pile and soil is estimated. Applicability, accuracy and efficiency of the proposed method in the safety assessment of a realistic pile-soil system subjected to axial loads are verified by comparing it with the results of the Monte Carlo simulation technique.

• Fire Science and Engineering
• /
• v.29 no.1
• /
• pp.80-86
• /
• 2015

This study analyzed recent cases of ship fires explosions and investigated their problems and coping plans. Through analysis on the statistical figures, it was found that our nation's situations of maritime accidents by kind during the period of 2009~2013 showed the ratios of ship accidents caused by fires explosions was the highest in 2012 with 7.58% (55 cases) followed by year 2009 with 3.39% (34 cases), year 2010 with 3.39% (25 cases), year 2011 with 6.03% (57 cases) and year 2013 with 6.74% (43 cases), which indicates a steady increase in the number of ship accidents. Majority of reasons for ship fires explosions were lack of safety awareness. Since those accidents happen on the sea, fires, once they happen, tend to get serious due to absence of on board & nearby fire extinguishing facilities, public fire service's uneasy access to them and great influences of natural factors such as wind and etc. Ship fires explosions are special cases unlike what happens to general edifices. So, their coping plans should focus on preventive measures since the damages those cases bring about can be detrimental. For this reason, it's necessary to research precise evacuation plans, develop ship structure & materials reinforcing fire resistance to secure more time for evacuation and enhance people's safety awareness by implementing thorough safety training.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.2
• /
• pp.175-183
• /
• 2010

To understand the variation of macro benthos community according to the installation of structure and topographic placement in the shellfish farm on tidal flat, the practical example of the tidal shellfish growing area at Namsung-ri Goheung was observed. The results of the research for the field observation were summarized as follows. (1) The ground gradient of the shellfish farm was very flat below about $1^{\circ}$. The shellfish farm ground took the shape of $\sqcup$ from the shoreline to the place of 150 m seawards, and the shape of $\sqcap$ from there to the low tide line. During ebb tide, the $\sqcup$ shape ground stored the sea water, and the $\sqcap$ shape ground was supposed to act as the effect factor to leak slowly or to prevent the outflow. (2) The oyster shell bag or the type of riprap wall as the boundary in the shellfish farm was classified into five types. The air exposure time and flooding time were 181 and 434 minutes, respectively. (3) In the numerical experiment, the deep-sea water wave coming in the study area had 0.5 m of maximum wave height to show the very stable conditions and the wave direction pattern of S-direction was dominant at Naro great ridge, and SE, SSW and S-direction were distributed strongly around the shellfish farm. (4) By the grain size analysis, the sediment around tidal flat consisted of gravel 0.00~5.81(average 1.70)%, sand 14.15~18.39(average 13.23)%, silt 27.59~47.15(average 30.84)% and clay 35.79~55.73(average 36.19)%, and the sediment type was divided into (g)M(lightly gravelly mud), sM(sandy mud) and gM(gravelly mud) by Folk's diagram. (5) The macro benthos community survey conducted in this site in January, 2010 showed that 1 species of Mollusca, 8 species of Polychaeta and 2 species of Crustacea appeared, and 11 species occupying over 1% of total abundance were dominant.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.2
• /
• pp.67-75
• /
• 2012

Carbon-dioxide capture and storage (CCS) process is consisted by capturing carbon-dioxide from large point source such as power plant and steel works, transporting and sequestrating captured $CO_2$ in a stable geological structure. During CCS process, it is inevitable of introducing impurities from combustion, capture and purification process into $CO_2$ stream. Impurities such as $SO_2$, $H_2O$, CO, $N_2$, Ar, $O_2$, $H_2$, can influence on process efficiency, capital expenditure, operation expense of CCS process. In this study, experimental apparatus is built to simulate the behavior of $CO_2$ transport under various impurity composition and process pressure condition. With this apparatus, $N_2$ impurity effect on $CO_2$ mixture transportation was experimentally evaluated. The result showed that as $N_2$ ratio increased pressure drop per mass flow and specific volume of $CO_2-N_2$ mixture also increased. In 120 and 100 bar condition the mixture was in single phase supercritical condition, and as $N_2$ ratio increased gradient of specific volume change and pressure drop per mass flow did not change largely compared to low pressure condition. In 70 bar condition the mixture phase changed from single phase liquid to single phase vapor through liquid-vapor two phase region, and it showed that the gradient of specific volume change and pressure drop per mass flow varied in each phase.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.2
• /
• pp.58-69
• /
• 2012

In modern society, rooftops and underground spaces are utilized for overcoming a confined space limitation of metropolitan areas. Therefore, floor covering construction is also increasing steadily. From the user's viewpoint, skid resistance performance of floor covering methods is a very important performance criterion for safety and amenity, but an appropriate design and assessment criteria for skid resistance performance are not available. This study presents the skid resistance performance assessment method of floor covering methods considering the sidewalk skid resistance standard of Seoul city and the guideline of the Ministry of Land, Transport and Maritime Affairs(MLTM) of Korea for road safety facilities'installation and maintenance. For this research, three alternatives among urethane floor covering methods are selected and their skid resistance performance is analyzed through an experimental study. The analyzed performance is also evaluated by the skid resistance performance assessment method. Finally, the comprehensive performance assessment including the results of skid resistance performance assessment is conducted by Value Analysis(VA) in order to encourage the construction methods of floor covering which have a high skid resistance performance. As a result of VA, the particle method which the skid resistance performance is improved up to four times more than other alternatives shows the highest performance index of 83.86.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.4
• /
• pp.495-508
• /
• 2019

Tidal datums are key and basic information used in fields of navigation, coastal structures' design, maritime boundary delimitation and inundation warning. In Korea, the Approximate Lowest Low Water (ALLW) and the Approximate Highest High Water (AHHW) have been used as levels of tidal datums for depth, coastline and vertical clearances in hydrography and coastal engineering fields. However, recently the major maritime countries including USA, Australia and UK have adopted the Lowest Astronomical Tide (LAT) and the Highest Astronomical Tide (HAT) as the tidal datums. In this study, 1-hr interval 19-year sea level records (1999-2017) observed at 9 tidal observation stations along the west and south coasts of Korea were used to calculate LAT and HAT for each station using 1-minute interval 19-year tidal prediction data yielded through three tidal harmonic methods: 19 year vector average of tidal harmonic constants (Vector Average Method, VA), tidal harmonic analysis on 19 years of continuous data (19-year Method, 19Y) and tidal harmonic analysis on one year of data (1-year Method, 1Y). The calculated LAT and HAT values were quantitatively compared with the ALLW and AHHW values, respectively. The main causes of the difference between them were explored. In this study, we used the UTide, which is capable of conducting 19-year record tidal harmonic analysis and 19 year tidal prediction. Application of the three harmonic methods showed that there were relatively small differences (mostly less than ±1 cm) of the values of LAT and HAT calculated from the VA and 19Y methods, revealing that each method can be mutually and effectively used. In contrast, the standard deviations between LATs and HATs calculated from the 1Y and 19Y methods were 3~7 cm. The LAT (HAT) differences between the 1Y and 19Y methods range from -16.4 to 10.7 cm (-8.2 to 14.3 cm), which are relatively large compared to the LAT and HAT differences between the VA and 19Y methods. The LAT (HAT) values are, on average, 33.6 (46.2) cm lower (higher) than those of ALLW (AHHW) along the west and south coast of Korea. It was found that the S_a and N₂ tides significantly contribute to these differences. In the shallow water constituents dominated area, the M₄ and MS₄ tides also remarkably contribute to them. Differences between the LAT and the ALLW are larger than those between the HAT and the AHHW. The asymmetry occurs because the LAT and HAT are calculated from the amplitudes and phase-lags of 67 harmonic constituents whereas the ALLW and AHHW are based only on the amplitudes of the 4 major harmonic constituents.

• Proceedings of the CALSEC Conference
• /
• 1999.11a
• /
• pp.159-168
• /
• 1999

오늘날 우리 나라가 당면한 최우선 경제과제중 하나는 물류부문의 혁신을 통한 국가경쟁력 강화라고 할 수 있으며, 이를 위해 정부도 1993년 물류체계 개선을 위한 장기구상으로 ‘화물유통체계 개선 10개년 기본계획’을 수립하여 적극 추진 중에 있다. 그러나 이러한 노력에도 불구하고 PORT-MIS사용자를 상대로 한 설문조사에서는 선박입출항 업무 관련 서류의 40%, 항만시설 사용 업무와 관련된 서류의 31%, 하역업무 관련 서류의 10%만이 EDI를 활용하고 있었다. EDI 활용이 저조한 사유로는 전송시간이 많이 걸리며, EDI 소프트웨어가 작동되지 않으며, 수신확인이 되지 않기 때문이라 응답을 하였다. 이처럼 오늘날 항만물류산업이 겪고 있는 물류 데이타 흐름의 단절적 현상은 시간이 흐를수록 해결될 기미가 보이고 있지 않다. 따라서 본 논문에서는 우리 나라가 겪고 있는 물류관련 업무를 한번의 데이터 입력으로 해결할 수 있는 원스톱 서비스 시스템개발을 목표로 우선 PORT-MIS EDI 업무를 처리할 수 있는 시스템을 구축하였다. 이는 향후 화주, 운송사, 선사, 포워더, 창고업자, 하역회사, 철도청, 화물터미널, 컨테이너 터미널, 해양수산청, 관세청, 출입국관리사무소, 검역소 사이에 서로 교환되는 적하목록, Booking List, 컨테이너 Pick up정보, 위험물 정보, COPINO 정보를 비롯하여 대 관세청 신고 등 수출컨테이너 화물업무의 전반적인 영역으로까지 쉽게 확대할 수 있을 것이다. 본 연구결과 구축된 시스템은 원천정보를 중앙의 통합데이터베이스에 저장하여 이를 사용자의 요구에 의해 인터넷을 통해 전달하는 FTP와 웹 EDI 방식을 결합한 하이브리드 형태이다.인터넷으로 주문처리하고, 신속 안전한 배달을 기대한다. 더불어 고객은 현재 자신의 물건이 배달되는 경로를 알고싶어 한다. 웹을 통해 물건을 주문한 고객이 자신이 물건의 배달 상황을 웹에서 모니터링 한다면 기업은 고객으로 공간적인 제약으로 인한 불신을 불식시키는 신뢰감을 주게 된다. 이러한 고객서비스 향상과 물류비용 절감은 사이버 쇼핑몰이 전국 어디서나 우리의 안방에서 자연스럽게 점할 수 있는 상황을 만들 것이다.SP가 도입되어, 설계업무를 지원하기위한 기본적인 시스템 구조를 구상하게 된다. 이와 함께 IT Model을 구성하게 되는데, 객체지향적 접근 방법으로 Model을 생성하고 UML(Unified Modeling Language)을 Tool로 사용한다. 단계 4)는 Software Engineering 관점으로 접근한다. 이는 최종산물이라고 볼 수 있는 설계업무 지원 시스템을 Design하는 과정으로, 시스템에 사용될 데이터를 Design하는 과정과, 데이터를 기반으로 한 기능을 Design하는 과정으로 나눈다. 이를 통해 생성된 Model에 따라 최종적으로 Coding을 통하여 실제 시스템을 구축하게 된다.the making. program and policy decision making, The objectives of the study are to develop the methodology of modeling the socioeconomic evaluation, and build up the practical socioeconomic evaluation model of the HAN projects including scientific and technologica