• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.1-11
• /
• 2004

A comprehensive study has been made for the investigation of the convergence and stability characteristics of the LU scheme for solving the Navier-Stokes equations on unstructured meshes. For this purpose the characteristics of the LU scheme was initially studied for a scalar model equation. Then the analysis was extended to the Navier-Stokes equations. It was shown that the LU scheme has an inherent stiffness in the streamwise direction. This stiffness increases when the grid aspect ratio becomes high and the cell Reynolds number becomes small. It was also shown that the stiffness related to the grid aspect ratio can be effectively eliminated by performing proper subiteration. The results were validated for a flat-plate turbulent flow.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.4
• /
• pp.65-73
• /
• 1985

A stochastic dynamic analysis using Mode-Acceleration Method was formulated and examined in this paper. A computer program was developed using this theory and model offshore structure was analyzed by the program. Results show that the stochastic dynamic analysis using the Mode-Acceleration Method is superior to that using Mode Displacement Method. The method using the theory developed in this paper was proved to be very reliable, economic and potential.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.1
• /
• pp.35-50
• /
• 2000

본 논문에서는 반복하중을 받는 철근 콘크리트 쉘구조물의 해석을 위한 비선형 유한요소 해법을 제시하였다 유한 요소로서는 충상화기법을 이용한 부재회전강성도를 갖는 4절점 평면 쉘요소가 개발되었다 두께 방향에 대한 철근과 콘크리트의 재료성질을 고려하기 위하여 충상화기법이 도입되었다. 재료적 비선형성에 대해서는 균열콘크리트에 대한 인장, 압축, 전단모델과 콘크리트중에 있는 철근모델을 조합하여 고려하였다. 이에 대한 콘크리트의 균열모델로서는 분산균열모델을 사용하였으며 철근에 대해서는 1축 응력상태로가정하여 등가의 분산 분포된 철근량으로 모델화하였다 구성모델은 재하, 제하 그리고 재재하과정을 포함하여 요소는 반복하중하에서 철근콘크리트 쉘의 거동을 파악할 수 있다 신뢰성 있는 실험결과와 비교를 통하여 본 논문의 해석방법이 반복하중을 받는 철근콘크리트 쉘구조의 비선형 해석에 적합한 방법임을 입증하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.519-527
• /
• 1987

Simple procedures have been formulated to compute approximate natural frequency of nonlinear systems by the use of variational principle. These procedures are applicable to motion of large amplitudes, even to systems which are not linearizable. The results obtained by these procedures have been found to have good agreements with computer solutions and exact solutions for systems having piece-wise linear springs and polynomial springs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.85-95
• /
• 1992

The moment distribution method has been widely used for the past sixty years for determining the end moments of structural frames. However, the method trends to show more complexity of the procedures and approximation of the results as the degree of indeterminancy increases. The previous study proposed closed form formulas for the analysis of the continuous beams up to four spans. These formulars show simpler forms and provide perfectly rigorous solution in comparision with the moment distribution method. This study proposes closed form formulas for the analysis of multi-span continuous beams which are basically similar to the equations developed in the previous study. It is shown that these formulars may also produce more rigorous results and lead to simpler calculation processes. The proposed approach may be one of the new methods for the analysis of multi-span continuous beams or the rigid frames.

• Journal of Korea Game Society
• /
• v.4 no.4
• /
• pp.19-24
• /
• 2004

In this paper, we have proposed a new geometric solution of inverse kinematics of high instinct, while traditional solutions of inverse kinematics requires high level of mathematical knowledge. It was possible to use the inverse kinematics without mathematical knowledge because 3D vectors of directions of folded bones could be calculated by our method in the inverse kinematic model of two bones. The proposed method can be utilized easily by graphic designers who have little knowledge of mathematics of inverse kinematics

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.1
• /
• pp.23-30
• /
• 2005

A numerical scheme is proposed which is applicable to the evaluation of wave field containing floating structures, and the method is utilized to estimate the effect of the floating breakwaters to be installed in Wonjeon port near Masan. The model is based on the mild-slope equation which is widely accepted for the calculation of wave modulation near shores and an additional term is introduced to consider the wave scattering associated with the thin floating structures such as floating breakwaters. The tranquility in Wonjeon port with the floating breakwater in the east side is calculated and compared with the one with a bottom-fixed breakwater. The present method is believed to provide an efficient way of quantitative measurement of the performance of floating breakwaters.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.256-256
• /
• 2021

Saint-Venant 방정식은 수평규모가 수심규모보다 큰 천수흐름을 기술하는 수리동역학 모형으로 지난 수십년간 공학적 분야에서 널리 이용되어 왔다. 최근에도 기후변화에 따른 도시 홍수의 위기 증대로 홍수위기관리의 관심이 높아짐에 따라 홍수파(flood wave), 도시침수(urban inundation), 돌발홍수(flash flood) 등의 신속한 예측을 위한 Saint-Venant 방정식의 연구가 활발히 진행되고 있다. 그러나 도시와 같은 인공구조물이 즐비한 상황에서 천수흐름을 해석하는 고전적인 수치해법들은 다양한 불연속 지형들의 존재로 인하여 불안정하며 지배방정식의 정해로 수치해가 잘 수렴하지 않는 문제가 있다. 지난 수년간 이를 해결하기 위해 불연속한 지형을 안정적으로 해결할 수 있는 수치기법의 연구가 진행되어 왔으나, 정해로의 수렴성, 정확성에 관하여 연구가 부족한 실정이다. 본 연구는 수치해법의 주요 구조를 구성하는 Saint-Venant 방정식의 불연속한 지형조건에 대한 리만 문제의 정해를 연구하였다. 쌍곡선형 시스템의 특징을 고려하여 요소파들(elementary waves)의 공식을 유도하였는데, 질량과 에너지의 보존법칙에 위배되지 않으며 운동량이송부의 비선형성과 지형의 불연속에 의한 비엄격성을 고려할 수 있는 조건을 제시하였다. 또한, 유도된 요소파들을 바탕으로 L-M & R-M 커브이론(Han et al. 2014)을 사용할 수 있는 조건과 당위성을 증명하였고, 이를 바탕으로 Saint-Venant 방정식의 정해법을 구성하였다. 리만문제의 다양한 초기조건들을 바탕으로 모든 경우의 정해 구조를 조사하였고, 이를 통해 불연속 지형에 대한 Saint-Venant 지배방정식의 정해가 다수해를 갖을 수 있음을 보였으며, 이를 근사할 수 있는 수치기법의 전략을 소개하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.12
• /
• pp.1343-1352
• /
• 1992

This paper presents a new and easy method to obtain the Fourier transforms of the n-th order cosine-pulses whose maximum amplitudes are uniform. The new method is focused on deriving a formula which is recursively related following their orders and can be well applied to some numerical solutions. On the other hand, this method also offers more compact procedures in view of analytical solutions than the conventional methods because the results are consist of the sum of two functions which are easily calculated. Especially, the formula can be represented as a complete recursion by the separation of coefficients originated by the authors and the resulting difference equation is given by the sum of the original 'sinc' functions shifted by some symmetrical factors and multiplied by some constants. The constants are easily decided from the binomial coefficients and the shifting factors from the corresponding exponential differences in the expansion of $(a+b)^n$.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.3
• /
• pp.289-299
• /
• 1982

동적운동 기구의 연결부분에 간극이 존재함으로 인해 발생하는 충격현상을 평면운동기구를 모델 로 하여 운동 역학적으로 해석하였다. 비정상 상태의 Reynolds 방정식을 적용하여 과도상태 및 정상 상태에 있어서 동하중과 유막 두께와의 관계를 압착 유막효과(squeeze film effect)에 중점을 두어 조사하였으며 탄성 변형을 고려하여 유도한 유막두께식과 Reynolds 방정식의 수치적분으로 는 무차원식으로 변형하여 Grubin의 간략해법을 이용하였다.