• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.29-36
• /
• 1995

Load testis are executed on model reticulated root piles (RRP) to figure out the optimum slanting angle in the piles installation. One set of model RRP consists of 8 slanting piles which are installed in circular patterns forming two concentric circles, each of which is made by 4 piles. Each pile which is a steel bar of 5m in diameter and 300mm in length is coated to become a pile of 6.5mm in diameter. The slanting angle of the model RRP varies from 0$^{\circ}$ to 20$^{\circ}$ Comparing ultimate bearing capacities of the model RRP of different installation angles, it is observed that the ultimate capacities of the RRP increase as the installation angle increases until 15$^{\circ}$, and the optimum slanting angle of the RRP is around 15$^{\circ}$ The ultimate bearing capacity of the 15$^{\circ}$-RRP is found to be 22% bigger than that of the vertical RRP and 120% bigger than that of the circular surface footing whose diameter is same with the circle formed by outer root piles'heads. However, it is noticed that when the slanting angle of the RRP is increased over 15$^{\circ}$, the ultimate capacity starts to be reduced. The ultimate capacity of 20$^{\circ}$-RRP is even smaller than that of the vertical RRP by as much as 5%. From the observation of the load settlement curve obtained during the RRP load tests, it is known that as the slanting angle gets bigger the load -settlement behavior becomes more ductile.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.3 no.1
• /
• pp.26-45
• /
• 1992

This study presents the behavioral and cognitive changes by administration of methylphenidate(MPH) and imipramine(IMI) for the treatment of attention-deficit hyperactivity disorder(ADHD) in $5_{1/2}{\sim}12$ years old children referred to child psychiatric clinics. Behavioral changes are assessed with parent's and teacher's ratings. Drug effects on attention. short-term memory, and impulsivity are evaluated with psychological tests in laboratory. The changes were assessed twice in a 8-week periods. The data were analyzed seperately for 15 subjects each drug using repeated measured analysis of variance(ANOVA). The findings indicates that behavioral and cognitive impairments are improved by both drugs, but impulsivity is not. And MPH is superior to IMI on the improvement of attentional problem ; especially the findings indicates important differences between simple task and complex. perceptual-search task. These data confirm the effectiveness of MPH for treatment of ADHD, also raise questions regarding assessment method of attention and impulsivity as fell as importance of impulsivity in ADHD.

• Water for future
• /
• v.5 no.1
• /
• pp.27-36
• /
• 1972

This thesis is the study of the rainfall probability depth in the major areas of Korea, such as Seoul, Pusan and Taegu. The purpose of the paper is to analyze the rainfall in connection with the safe planning of the hydraulic structures and with the project life. The methodology used in this paper is the statistical treatment of the rainfall data in the above three areas. The scheme of the paper is the following. 1. The complementation of the rainfall data We tried to select the maximm values among the values gained by the three methods: Fourier Series Method, Trend Diagram Method and Mean Value Method. By the selection of the maximum values we tried to complement the rainfall data lacking in order to prevent calamities. 2. The statistical treatment of the data The data are ordered by the small numbers, transformed into log, $\sqrt{}, \sqrt[3]{}, \sqrt[4], and$\sqrt[5], and calculated their statistical values through the electronic computer. 3. The examination of the distribution types and the determination of the optimum distibution types By the $x^2-Test$ the distribution types of rainfall data are examined, and rejected some part of the data in order to seek the normal rainfall distribution types. In this way, the optimum distribution types are determined. 4. The computation of rainfall probability depth in the safety project life We tried to study the interrelation between the return period and the safety project life, and to present the rainfall probability depth of the safety project life. In conclusion we set up the optimum distribution types of the rainfall depths, formulated the optimum distributions, and presented the chart of the rainfall probability depth about the factor of safety and the project life.ct life.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.116-124
• /
• 2022

In this study, waste air containing ethanol and hydrogen sulfide, was treated by an integrated hybrid system composed of two alternatively-operating UV/photocatalytic reactor-process and biofilter processes of a biofilter system having two units with an improved design (R reactor) and a conventional biofilter (L reactor). Both a pressure drop (△p) per unit process of the integrated hybrid system and a microbe-population-distribution of each biofilter process were observed. The △p of the UV/photocatalytic reactor process turned out very negligible. The △p of the L reactor was observed to increase continuously to 4.0~5.0 mmH₂O (i.e., 5.0~6.25 mmH₂O/m). In case of R reactor, its △p showed the one below ca. 16~20% of the △p of the L reactor. Adopting such microbes-carrying biofilter media with high porosity as waste-tire crumb media, and the improved biofilter design, contributed to △p of this study, reduced by ca. 37~50% and 40~53%, respectively, from the reported △p of conventional biofilter packed with biofilter media of the mixture (50:50) of wood chip and wood bark. In addition, the △p of R reactor in this study, reduced by ca. 80% from the reported △p of conventional biofilter packed with biofilter media of the mixture (75:25) of scoria with high porosity and compost, was mainly attributed to adopting the improved biofilter design. On the other hand, in case of L reactor, the CFU counts in its lowest column was analyzed double as much as those in any other columns. However, in case of R reactor, its CFU counts were bigger by 50% than the one of L reactor and its microbes were evenly distributed at its higher and lower columns of R_dn reactor and R_up reactor. This phenomena was attributed to an even moisture distribution of 50~55% of R reactor at its higher and lower columns. Therefore, R reactor showed superb characteristics in terms of both △p and microbe-population-distribution, compared to L reactor.

• Korean Journal of Culture and Social Issue
• /
• v.21 no.2
• /
• pp.253-277
• /
• 2015

The purpose of this study was to identify work-family balance values(work-family centrality, marriage value, child-care value, work value etc) in Korea, Japan and U. K.. Moreover, This article investigated the attitudinal generational gap in each countries. Participants were 311 Korean, 324 Japanese and 322 English married working women, who were in the thirties fifties. The major findings of this study were as follows. Compared to Japan and U. K., Korean married working women were more work-centered and likely to seek for extrinsic work value as well as intrinsic work value. While they were highly thought that a woman should work despite of her marriage, it was also strongly concerned if their work negatively affected family life, they should be better to quit their job. These results showed that conservative-liberal values were coexisted in Korean participants. Secondly, U. K. participants were more centered on the family-oriented value and thought that women were not necessary to work in work-family conflict, in comparison to Korean and Japanese. As a result of cluster analysis, they were a lot distributed in 'woman's family care oriented group' which was weigh on woman's role as a family care giver as well as 'family value oriented group'. Thirdly, Japan participants not only were less family-centered but also less work-centered. In the similar vein, they were less motivated and oriented to all of intrinsic and extrinsic work values compared with participants in Koran and U. K. On the other hand, Japanese participants, in sharp contrast to Korean, had a liberal viewpoint in work-family related values, such as woman's work, career break caused by work-family conflict, and family values. We were trying to interpret these results in consideration of socio-economic-politic as well as psychological aspects.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.885-890
• /
• 2003

This study was conducted to estimate the growth curve parameters of 253 heads of F2 population produced by inter-crossing F1 from Korean Native boars and Landrace sows, and to estimate the effects of Leptin receptor gene(LEPR) on their growth characteristics. Growth curve parameters were estimated from nonlinear regression using Gompertz model individually. Average mature weight and average maturing rate estimated were 179.69${\pm}$4.40kg and 0.3103${\pm}$0.0043, respectively. The effect of sex was insignificant for all the parameters estimated from Gempertz model(p〉.05), and the effect of calving group was significant for mature weight and maximum growth rate at inflection point (p〈.05). The effect of LEPR genotype were significant for all the growth curve parameters(p〈.05). According from the results of the least squares means of growth curve parameters by LEPR genotypes, mature weight and point of inflection were highest in genotype AA in which the maturing rate was the lowest, and were lowest in genotype DD in which maturing rate was the highest, reversely.

• Journal of the Korea Concrete Institute
• /
• v.24 no.4
• /
• pp.369-379
• /
• 2012

The collapse of concrete structures by extreme loads such as impact, explosion, and blast from terrorist attacks causes severe property damage and human casualties. Concrete has excellent impact resistance to such extreme loads in comparison with other construction materials. Nevertheless, existing concrete structures designed without consideration of the impact or blast load with high strain rate are endangered by those unexpected extreme loads. In this study, to improve the impact resistance, the static and impact behaviors of concrete beams caste with steel fiber reinforced concrete (SFRC) with 0~1.5% (by volume) of 30 mm long hooked steel fibers were assessed. Test results indicated that the static and impact resistances, flexural strength, ductility, etc., were significantly increased when higher steel fiber volume fraction was applied. In the case of the layered concrete (LC) beams including greater steel fiber volume fraction in the tensile zone, the higher static and impact resistances were achieved than those of the normal steel fiber reinforced concrete beam with an equivalent steel fiber volume fraction. The impact test results were also compared with the analysis results obtained from the single degree of freedom (SDOF) system anaysis considering non-linear material behaviors of steel fiber reinforced concrete. The analysis results from SDOF system showed good agreement with the experimental maximum deflections.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.79-84
• /
• 2016

A flexible electronic device deformed by external force causes the failure of a semiconductor die. Even without failure, the repeated elastic deformation changes carrier mobility in the channel and increases resistivity in the interconnection, which causes malfunction of the integrated circuits. Therefore it is desirable that a semiconductor die be placed on a neutral line where the mechanical stress is zero. In the present study, we investigated the effects of design factors on the position of neutral line by finite element analysis (FEA), and expected the possible failure behavior in a flexible face-down packaging system assuming flip-chip bonding of a silicon die. The thickness and material of the flexible substrate and the thickness of a silicon die were considered as design factors. The thickness of a flexible substrate was the most important factor for controlling the position of the neutral line. A three-dimensional FEA result showed that the von Mises stress higher than yield stress would be applied to copper bumps between a silicon die and a flexible substrate. Finally, we suggested a designing strategy for reducing the stress of a silicon die and copper bumps of a flexible face-down packaging system.

• The Journal of Engineering Geology
• /
• v.23 no.2
• /
• pp.149-160
• /
• 2013

Volcanic activity commonly creates a highly complicated volcanic complex due to the admixture of lava flow and sedimentation of volcanic ash. The Song-Gok site is composed of volcanic rocks that collapsed at the lower part of the slope, in combination with several discontinuities in and around a fault. The results of projection analysis indicated the possibility of plane, wedge, and toppling failure in the failure section. The results of discontinuity modeling using the Distinct Element Method (DEM) revealed a total displacement of 207 mm and a joint shear displacement of 114 mm. The yield surface zone was verified at the fault plane of the failure section. In geotechnical terms, volcanic rock slopes are characteristically vulnerable to failure because of differential weathering among the various rock types, the effect of groundwater based on the permeability of the rocks, and the presence of systematic joints generated by the cooling and contraction of lava. When considering the stability of a volcanic rock slope, it is necessary to consider data such as the geological features of the rock, as obtained through detailed geological survey, and variations in discontinuities and rock blocks.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.850-859
• /
• 2012

Devolatilization is an important mechanism in the gasification and pyrolysis of woody biomass, and has to be accordingly considered in designing a gasifier. In order to describe the devolatilization process of wood particle, there have been proposed a number of empirical correlations based on experimental data. However, the correlations are limited to apply for various reaction conditions due to the complex nature of wood devolatilization. In this study, a simple model was developed for predicting the devolatilization of a wood particle in a fluidized bed reactor. The model considered the drying, shrinkage and heat generation of intra-particle for a spherical biomass. The influence of various parameters such as size, initial moisture content, heat transfer coefficient, kinetic model and temperature, was investigated. The devolatilization time linearly increased with increasing initial moisture content and size of a wood particle, whereas decreases with reaction temperature. There is no significant change of results when the external heat transfer coefficient is over 300 $W/m^2K$, and smaller particles are more sensitive to the outer heat transfer coefficient. Predicted results from the model show a similar tendency with the experimental data from literatures within a deviation of 10%.