• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.625-635
• /
• 1997

The base isolation technique and its benefits in reducing the transmitted earthquake energy into a structure have gained increasing recognition during the last two decades. Unfortunately, the current available design procedures, especially for base-isolated bridges, seem inadequate and too restrictive. As a result, practical design procedure still relies upon a series of deterministic time history analyses. In this study, the evaluation of the possibility of the normal mode method to predict the nonlinear seismic responses of base isolated bridges has been performed. The applicability has been examined through the numerical approach with isolator's elastic or plastic states of the base isolated bridges. Numerical results show that the 1st. mode period and the various responses are varied with the state but are conversed. And, the result show that the normal mode method is applicable to predict the seismic responses and to design the babe isolated bridge. Various analysis method to bridges with bilinearized hysteresis isolator and various pier heights are evalulated.

• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.685-696
• /
• 2012

EFDC model, which is capable of handling both hydrodynamic and water quality analysis has come to use for many recent studies. In order to assess the applicability of the EFDC model, it was applied to Nakdong river. Hydrodynamic and water quality analysis were carried out for Nakbon GH and HI sections chosen as the area of study with gaged data from 2008 to 2009. The comparison was made between water quality simulation results and observed data over water temperature, COD, TOC, DO, TN and TP. On the contrary, a conversion formula was derived to calculate BOD which the EFDC model cannot directly calculates and it was compared to measured data. In this study, it was determined that the EFDC model well represents the behavior of both hydrodynamics and water quality. However, further research on COD, TOC and accurate conversion of BOD needs to be conducted for efficient application to domestic water quality analysis.

• Journal of the Korean Geographical Society
• /
• v.37 no.2
• /
• pp.131-142
• /
• 2002

The community and communal folk belief are developed as spatial phenomena. So the communal folk belief express the spatial perception of inhabitants in traditional village. This study analysis the spatial characteristics of communal folk belief in traditional village. The study area is Bangchon village which consists of seven hamlets in Changhung-gun, Chollanam-do. The reset are as follows. First, the seven hamlet\`s location process in Bangchon village has been developed with spatio-temporal variations since Korea dynasty. Second, the communal folk belief in study area can be classified as Ipsok, Byolsinje\`s site, Hojeby\`s site. Third, the spatial characteristics of communal folk belief in study area are indication of each hamlet\`s boundary, indication of entrance and exit of Bangchon visage, indication of central space of Bangchon village in traditional period. Consequently, the spatial distribution of communal for belief are important indicator about spatial structure and spatial perception in traditional village\`s society.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.367-370
• /
• 2012

본 연구는 하나의 장치 내에서 "싸이클론-관성충돌-여과포 집진"이라는 다단 제진 단계가 동시에 이루어져 입경 분포별로 순차적인 제진이 가능한 멀티 집진기의 처리가스 제어 효율을 극대화시킬 수 있는 기류 흐름을 얻기 위한 최적화 설계 조건을 검토하는 것이다. 우선 1단계 제진 과정인 원심력을 이용하여 조대입자의 유선 이탈을 촉진시킬 수 있는 사이클론 유동을 최적화시키기 위한 집진기 입구 형상 설계 검토를 위해 수치 해석적 연구를 수행하였다. 그 결과, 멀티집진기 입구 형상을 일반적인 설계 방식인 접선 유입식으로만 설계한 것에 비해 선회류를 한번 더 가속화시킬 수 있는 가이드 베인을 추가로 설계한 경우 선회류의 pitch가 짧고 강하게 형성되어 사이클론부에서 조대입자의 유선 이탈을 촉진시키는데 매우 효과적인 것으로 예측되었다. 단, 사이클론부 하단 벤츄리 형상으로 인해 약 4~5 m/s의 강한 하향 흐름이 호퍼 하단까지 형성되고 있어 탈리 분진의 재비산 문제가 발생할 가능성이 크므로 벤츄리 형상 설치 유무에 대한 영향도 추가적으로 연구가 필요할 것으로 판단된다.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.281-286
• /
• 2019

To repair the underside of the car, a repairman has to enter under the car body. But this work can make it difficult for him to fix it and the injuries can occur. To solve these difficult problems, the developed equipment is the automotive lift. In this study, three kinds of lift models 1, 2 and 3 were designed and the material properties of the structural steel were applied. As the same load were applied under the same conditions on all models, the structural analyses were conducted. Models 2 and 3 were shown to have the structural deformation less than model 1. Also, models 2 and 3 were shown to be more stable than model 1 structurally. By utilizing the design data on a convergence research through durability analysis according to the configuration of automotive lift obtained on the basis of this result, the esthetic feeling can be shown by being converged onto the automotive repair equipment parts at actual life.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.44-44
• /
• 2015

저수지나 하천 사면에서 발생하는 산사태와 토석류는 저수지와 하천 수체에 충격을 가한다. 이로 인해 발생하는 수면 충격파는 전파되어 반대편 제방으로 파의 처오름 또는 댐 제체위로의 물넘이로 큰 피해를 줄 수 있다. 최근 외국에서는 2차원 충격파 생성 및 전파의 기본 과정을 구명하기 위한 실험적 연구가 이뤄지고 있으며, 이들 연구들은 충격파의 발생과 전파, 사면활동 물질과 수체의 상호작용 그리고 자유 수면과 유속분표의 발달에 대한 자세한 관측 자료를 제시하고 있다. 아울러 충격파에 영향을 주는 지배 매개변수를 제시하고 있다. 하지만, 이러한 실험적 연구의 최근 진보에도 불구하고, 이들 지배 매개변수를 고려한 충격파 지배공식들은 대상 지역의 복잡한 바닥 지형이나, 평면적 지형 변화를 단순한 추정치로만 고려하게 된다. 따라서 복잡한 지형조건에서 토석류와 수체의 상호작용과 수면 충격파의 전파를 합리적으로 해석하는 데는 한계가 있다. 이 경우 수치모델링 기법을 대안으로 적용할 수 있으나, 수치모델링은 수면에서 충격파의 전파와 수중에서 토석류의 전파를 동시에 모의해야 하고, 뉴턴 유체와 비뉴턴 유체의 특성을 동시에 고려해야하므로 수치해석 연구자들에게는 하나의 큰 도전사항이다. 이 연구는 경계면 포착기법을 이용한 계산유체동력학 기법을 이용하여 사면활동과 이로 인한 정지 수역에서의 충격파의 발생 및 전파를 재현하기 위한 수치 모델링 기법을 개발하는 것이 목적이다. 사면활동과 수면의 경계면을 포착하고 위치를 정립하기 위해서 VOF (volume of fluid) 경계면 재구축 기법을 이용한다. 지배 방정식은 비압축성(incompressible) 질량 보존방정식과 나비어-스톡스(Navier-Stokes) 방정식이며, 서로 다른 유체의 상(phase)애 대한 체적분할이송방정식을 이용한다. 큰와 모의 계열의 난류 모델링 기법을 적용하여 충격파의 전파와 붕괴에 대한 난류의 영향을 고려하였다. 토석류는 비뉴턴 흐름저항 관계식을 적용하여 그 흐름특성을 재현하였다. 이들 지배방정식은 2차 정확도의 유한체적법(finite volume method)을 이용하여 해석한다. 외국의 연구자들이 관측하여 제시한 길이 11 m 그리고 폭 0.5 m의 수로에서 발생한 충격파를 수치적으로 재현하여 개발된 모형의 실제 문제에 대한 적용성을 보여준다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.201-210
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mats. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributons. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks dial not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the $K_{I}$ vague increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.s.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.447-456
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mass. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributions. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks did not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the K$_1$ value increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.6
• /
• pp.559-565
• /
• 2002

In this paper, we proposed an efficient method that estimates the HMM (Hidden Marke Model) parameters of the noisy speech. In previous methods, noisy speech HMM parameters are usually obtained by analytical methods using the assumed noise statistics. However, as they assume some simplication in the methods, it is difficult to come closely to the real statistics for the noisy speech. Instead of using the simplication, we used some useful statistics from the clean speech HMMs and employed the deterministic noise model. We could find that the new scheme showed improved results with reduced computation cost.

• The Mathematical Education
• /
• v.16 no.1
• /
• pp.1-10
• /
• 1977