• Korean Journal of Acupuncture
• /
• 제21권2호
• /
• pp.193-195
• /
• 2004

Objective : In March 2004, the second Informal Consultation Meeting on Development of International Standard of Acupuncture Point Locations was held in Beijing, China. Methods: Thirteen experts from WHO, Korea, China, and Japan attended the meeting, and they discussed the problems to establish an international standard of acupuncture point locations for education, research and quality of acupuncture treatment. Results and Conclusions : Based on the fundamental principles of respecting and reality, they recommended to determined the location of acupuncture points in the way of combining documentary analysis, clinical practices and factual measurements.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.7-11
• /
• 2003

This study investigate the hydration heat history with variation of surface insulating material in cold weather concreting. According to the results, the temperature of concrete lowers below zero in 24hours, so early frost damage occurs in the case of exposure and 1 fold bubble sheet, but the lowest temperature keeps above zero, so a adiabatic effect is very favorable in the case of double bubble sheet and 부직포. Compressive strength of core specimen at 7 and 28 days is highest In the case of double bubble sheet and 부직포. But, considering convenience of construction and economical efficiency, it is thought that the most effective surface insulating material is 1 fold bubble sheet +blanket.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.13.2-17
• /
• 2003

When fresh concrete is exposed to low temperature, the concrete may suffer frost damage due to freezing at early ages and strength development may be delayed. One of the solution methods to resolve these problems is to lower freezing temperature of concrete by the use of chemical admixture called Accelerators for Freeze Protection. In this study, it was the results of appling cold weather concrete using Accelerator for Freeze Protection in the Daewoo Trump world field. Before the application of the cold weather concrete using accelerator for freeze protection, we executed the some test in the laboratory and mock-up test in the field. We examined the manifestation of compressive strength complying with the amount of Accelerators for Freeze Protection and curing conditions, and then made a selection of most suitable amount of Accelerators for Freeze Protection.

• 수산경영론집
• /
• 제39권3호
• /
• pp.67-90
• /
• 2008

In this study, we aimed to build the basic calculation model for linkage effects of fishery industry among Korea, China and Japan. For the calculation, we reconstructed the asian international input-output table, and on the basis of the reconstructed table, we made some analyses on the inter-relations among 3 nations focusing fishery industry. As the results, some positive backward linkage offsets of the fishery industries were found among 3 nations, and especially, production inducing effect of Chinese fishery industry to Japanese supplier was remarkable.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.113-114
• /
• 2013

This study is to investigate the effect of the diameter of reinforcement bars located in an aluminum-form on the temperature histories of the re-bars before placing concrete during a cold weather condition. The diameters of reinforcement bars with 13 mm, 19 mm, 25 mm and 32 mm were prepared for the experimental tests. Results showed that the larger the size of the diameter of the bars, the higher were the temperature drop. However, this study found that its effect on the temperature drop of the bars was insignificant.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.326-328
• /
• 2013

This study compares the periods of cold weather concrete determined by the codes regulated by KCI (Korean Concrete Institute) and AIJ (Architectural Institute of Japan). For the calculation of the periods of cold weather concrete, the climate data for last 5 years obtained from Korean weather forecast station is used. Calculated data indicated that the period of cold weather concrete by AIJ code is longer than that by KCI code. Although global warming causes the decrease of the period of winter season, the temperature differences are large in Korea. Therefore, it is required that the current KCI code should be accordingly upgraded to reflect the weather variation in Korea over time.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.71-72
• /
• 2013

This study investigates the effect of the diameters of reinforcement bars located in an euro-form before placing concrete in a cold weather condition. The diameters of reinforcement bars with 13 mm, 19 mm, 25 mm and 32 mm were prepared for the experimental tests. Results showed that the larger the size of the diameter of the bars, the higher were the temperature drop. However, this study found that its effect on the temperature drop of the bars was insignificant.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.37-38
• /
• 2011

This study is to analyze and compare improved curing sheet with blue sheet in order to verify the performance related to tensile stress. As results, it is confirmed that improved curing sheet(MP+BBS1) is better than the blue sheet at using field already. Synthetically, curing sheet improved by MP is analyzed to be available instead of the original because it is superior to tensile stress.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 추계학술발표논문집 (상)
• /
• pp.607-610
• /
• 2002

패턴에 기반한 자동번역 시스템에 있어서, 번역률을 결정하는 가장 중요한 요소는 패턴의 양과 질이다. 필요한 대량의 패턴을 단기에 구축하기 위해서 패턴 정보 기술상의 잉여성을 줄일 필요가 있다. '하다' 동사는 한국어에서 가장 빈번하게 사용되는 동사 중의 하나로서, 'X를 하다'와 'X하다'의 2가지 구문 구조를 갖는다. 본 논문에서는 동사구 패턴에 기반한 한중 자동 번역 시스템에서 'X를 하다'와 'X하다' 구문간의 상관성을 이용하여 두 구문이 'X하다' 동사에 대한 동사구 패턴을 공유하도록 함으로써 동사구 패턴 구축 시에 정보의 중복 기술을 피하고, 패턴의 적용 범위를 넓힌다. 패턴의 공유로 인해 발생하는 대역문 생성 시의 문제점은, 'X를 하다' 구문에 대응하는 중국어 대역 형태 별로 분류하여 해결함으로써 패턴을 공유하면서도 번역의 질은 유지시킬 수 있는 방법을 제안한다.

• 동남아시아연구
• /
• 제20권3호
• /
• pp.65-100
• /
• 2010

One of main findings of the competitiveness relation is rapid increase of Chinese influence on the southeast Asian market. While Japanese market share is decreasing, Chinese market share is continuously increasing in the market. It is the same regardless of types of production phases. Analysis based on gravity model shows that in general Chinese exports is crowding out Korean and Japanese export to the market. The magnitude of the effects on Korean exports is larger than on Japanese exports. Also, It is found that the directions of the effect of Chinese exports on Korean and Japanese exports are different by production phrases. For all processed goods, increase of Chinese exports decreases both Korean and Japanese exports to the market. However, for some final goods such as transport equipment and food & beverages for household, Chinese exports is increasing Korean and Japanese exports to the market.