• Journal of the Korean Electrochemical Society
• /
• v.15 no.2
• /
• pp.101-108
• /
• 2012

The purpose of this study was to improve the conductivity of $Li_3V_2(PO_4){_3}$ by adding carbon source so that the discharge rate and cyclic properties were improved. Glucose and CNT were added to $Li_3V_2(PO_4){_3}$ and the structure and electrochemical properties were studied. $Li_3V_2(PO_4){_3}$, $Li_3V_2(PO_4){_3}$/C and $Li_3V_2(PO_4){_3}$/CNT were synthesised by solid state reaction using hydrogen reduction method at 600, 700, 800, $900^{\circ}C$. The cathode materials were assembled to coin cell type 2032 with Lithium metal as a counter electrode. The coin cell was galvanostatically evaluated in the voltage range of 3.0~4.8 V.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.116-124
• /
• 2022

In this study, waste air containing ethanol and hydrogen sulfide, was treated by an integrated hybrid system composed of two alternatively-operating UV/photocatalytic reactor-process and biofilter processes of a biofilter system having two units with an improved design (R reactor) and a conventional biofilter (L reactor). Both a pressure drop (△p) per unit process of the integrated hybrid system and a microbe-population-distribution of each biofilter process were observed. The △p of the UV/photocatalytic reactor process turned out very negligible. The △p of the L reactor was observed to increase continuously to 4.0~5.0 mmH₂O (i.e., 5.0~6.25 mmH₂O/m). In case of R reactor, its △p showed the one below ca. 16~20% of the △p of the L reactor. Adopting such microbes-carrying biofilter media with high porosity as waste-tire crumb media, and the improved biofilter design, contributed to △p of this study, reduced by ca. 37~50% and 40~53%, respectively, from the reported △p of conventional biofilter packed with biofilter media of the mixture (50:50) of wood chip and wood bark. In addition, the △p of R reactor in this study, reduced by ca. 80% from the reported △p of conventional biofilter packed with biofilter media of the mixture (75:25) of scoria with high porosity and compost, was mainly attributed to adopting the improved biofilter design. On the other hand, in case of L reactor, the CFU counts in its lowest column was analyzed double as much as those in any other columns. However, in case of R reactor, its CFU counts were bigger by 50% than the one of L reactor and its microbes were evenly distributed at its higher and lower columns of R_dn reactor and R_up reactor. This phenomena was attributed to an even moisture distribution of 50~55% of R reactor at its higher and lower columns. Therefore, R reactor showed superb characteristics in terms of both △p and microbe-population-distribution, compared to L reactor.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.522-529
• /
• 2014

Circulating fluidized bed system consists of SEWGS reactor - lower loop seal - regeneration reactor - riser - cyclone - upper loop seal has been used for solid circulation between the SEWGS reactor and the regeneration reactor in a SEWGS system for pre-combustion $CO_2$ capture. A vertical type lower loop seal has been used in current system but this lower loop seal requires high gas flow rate through the lower loop seal for fluidization and smooth solid circulation, and consequently, causes slugging behavior sometimes. To overcome these disadvantages, inclined type lower loop seal was proposed by this study. Solid circulation characteristics with change of lower loop seal geometry were measured and compared in a bubbling - bubbling - riser type circulating fluidized bed using $CO_2$ absorbent (P-78) as bed material at ambient temperature and pressure. We could conclude that the inclined lower loop seal is better than the vertical type lower loop seal from the viewpoints of minimum flow rate requirement for stable solid circulation and solid height change during solid circulation.

• The Korean Journal of Pesticide Science
• /
• v.3 no.1
• /
• pp.29-36
• /
• 1999

A series of N-phenyl-O-phenylthionocarbamate derivatives were synthesized and determinated fungicidal activities in vitro against gray mold (Botrytis cinerea) and capsicum phytophthora blight (Phytophthora capsici) which showed resistance and sensitivity to benomyl and metalaxyl as systemic fungicides, respectively. The structure-activity relationship (SAR) was investigated by Free-Wilson analysis method and Hansch method. From the basis on the findings, the N-phenyl(X) groups had more contributions than O-phenyl(Y) groups did and ortho-substituents on the N-phenyl group showed high fungicidal activities. Especially, 4-cyano substituent, 2 as X-group showed 50% inhibition($pI_{50}=5.50$) of hyphae growth at 0.8ppm against resistance P. capsici (RPC) And hydroxyl substituents, 12 and 23 displayed the highest fungicidal activity against resistant B. cinerea (RBC), sensitive B. cinerea (SBC), and sensitive P. capsici (SPC). Antifungal activities of SPC were dependent upon molar refractivity (MR) constant and those of others relied on hydrophobic parameters (${\sigma}$ and logP). For increasing fungicidal activity against RPC and SBC, the optimum values of the sigma (${\sigma}$) and field(F) constants as electron withdrawing groups were 0.32 and 0.18, respectively.

• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.326-333
• /
• 1996

Dehydrogenation of 4-vinylcyclohexene(4-VCH) to ethylbenzene is elucidated via catalytic transfer hydrogenation with the heterogeneous catalyst of Pd/C. Hydrogen-donor solvent is ethanol or water. Oxidizers of the catalytic dehydrogenation reaction are mono- or dinitro compounds, $H_2O_2$, NaClOn (n=1~4), or oxygen at $70{\sim}110^{\circ}C$. The ratio of 4-VCH/Nitro compounds is 1:0.02 to 1:0.5 and 4-VCH vs. $H_2O_2$ or NaClOn (n=1~4) is 1:0.1 to 1:3.

• Convergence Security Journal
• /
• v.3 no.1
• /
• pp.73-84
• /
• 2003

The IPv4 that used to be generally used as a medium of computer communications in 1980s has reached its limits now. IPv6 (IP Version 6) is being prepared to solve the limitations of the IPv4. However, the biggest problem of IPv6 is that it is not compatible with the IPv4. To resolve the compatibility issue, Dual Stack, Tunneling and Header Converting methods have been proposed. The Header Converting method allows communications between the IPv4 and IPv6 networks with the converter. This method's strength is that it is easy to embody and the procedures for embodiment is simple. However, this method still contains the weaknesses that the existing IPv4 has. On the current document, the Header Converting method among the three methods is discussed to resolve the problems this method has. To solve the Header Converting method's weakness, the security problem between sections, the IP Header field values are converted to the relative field values and IPSec (IP Security) and ESP (Encapsulation Security Payload) are applied. The proposed "Encrypted Header Converting Method" that is encrypted in packet units has solved the weakness that the pre-existing Header Converting method used to have.d to have.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.3
• /
• pp.229-236
• /
• 2008

This experiment was conducted to study on the evaluation of fermentation ability of microbes for whole crop rice silage Inoculant at National Institute of Animal Science, RDA from 2004 to 2005. We collected 28 strains of microbes from whole crop rice silage. According to acidity and growth ability, 5 strains of microbes was isolated (R4-1, R7-1, R7-2, R10-1, R12-1). The cultures of 4 strains were identified to be Lactobacillus plantarum (R4-1, R7-1, R7-2 and R10-1) and one was identified to be Lactobacillus pentosus (R12-1). Whole crop rice was harvested at the yellow ripen stage. It was ensiled in experimental silos (20ℓ capacity) with or without microbial additives (R4-1, R7-1, R7-2, R10-1, R12-1 and three commercial inoculant) and stored at room temperature for 60d. The pH value and acetic acid content of additivetreated silages were lower and lactic acid content was higher than those of the control (p<0.05). There was a trend for acetic acid content to be lowest and lactic acid to be highest in R7-1 treated silage. Crude protein (CP) contents of R7-2 treated silage was higher and acid detergent fiber (ADF) and neutral detergent fiber (NDF) contents of R7-1 treated silage was lower (p<0.05). Although some strains of inoculant could improve silage quality, L. plantarum R7-1 was more effective as an inoculant for whole crop rice silage. This microbe was named NLRI 401 and registered in the Korea Agricultural Culture Collection.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.266-271
• /
• 2014

The effects of antioxidants on the properties of Polycarbonate/Acrylonitrile-Butadiene-Styrene(PC/ABS) blends were studied for the functions of the screw speed and loaded duration of high shear rate processing in order to investigate the degradation for PC/ABS blends. Tris-(2,4-di-tert-butyl-phenyl phosphate) (A1) and Bis(2,4-dicumylphenyl) pentaerythritol diphosphite (A3) as phosphite antioxidants and Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate (A2) as a phenolic antioxidant are used. The thermal properties were detected by TGA and severely decreased, after the processing. The stress-induced and thermal degradation for PC/ABS blends with the antioxidant A3 was retarded better than the others. By using UTM, the mechanical properties also showed individually decreased according to the antioxidants, after the processing, especially, the elongations showed considerable decline behaviors, while the tensile strengths of PC/ABS blends changed very little. For example, in the operating conditions of 1000rpm of screw speed and 20 seconds of loaded period, the elongations decreased from 148% before the processing, to 91.6% with the A1, to 63% with the A2 and to 131% with the A3 after the processing, respectively. In order to get the morphological properties, the size distributions of the dispersed phases for PC/ABS were investigated by SEM analysis and tended to decrease, as the screw speed and loaded period of the processing increased. Therefore, we confirmed that the antioxidant A3 was the best of all of three to inhibit the stress-induced degradation of PC/ABS blends during the high shear rate processing.

• Journal of Bio-Environment Control
• /
• v.33 no.1
• /
• pp.71-78
• /
• 2024

Among the various environmental conditions necessary for growing crops, light is closely related to the anthesis. This study aimed to determine the optimal photoperiod affecting floral differentiation in an edible flower, marigold, to efficiently cultivate the crops in a closed-type plant factory. The experiment was conducted with photoperiods of 4, 8, 12, and 16 hours. French marigold (Tagetes patula L.) 'Durango Red' seeds were sown in polyurethane sponges, and the photoperiod treatments were applied immediately. The extent of floral differentiation was examined at 2-3 day intervals, defined as the visible appearance of flower buds at least 2 mm in size. The growth parameters such as shoot fresh weight and dry weight, height, and leaf area were measured. The optimal photoperiod was determined based on the days when the floral differentiation had occurred in 50% of the total plants. In the 4-hour treatment, proper growth and flower buds did not appear. From the 8-hour treatment, the plant grew normally, and floral differentiation occurred, however, the 8-hour treatment showed the slowest floral differentiation compared to the 12 hours treatments or more. The 12- and 16-hour treatments didn't show significant differences in floral differentiation. While the 16-hour treatment exhibited the highest results in all growth parameters, it was not significantly different from the 12-hour treatment except for shoot dry weight and leaf area. According to the results, 8 hours of photoperiod induced floral differentiation. However, more time was required for flower bud formation, and plant growth was significantly lower compared to photoperiods of 12 hours or more. Considering the energy consumption and its growth, the optimal photoperiod for marigold was 12 hours.

• Journal of Embryo Transfer
• /
• v.30 no.3
• /
• pp.195-200
• /
• 2015

The objective of this study was to evaluate the toxicities of permeable cryoprotectants and finally to establish the cryopreservation method of surplus embryos obtained during assisted reproductive technology (ART). Toxicities of permeable cryoprotectants, dimethyl sulfoxide (DMSO), ethylene glycol (EG), Glycerol, and 1,2-PROH were investigated using a murine embryo model. Female $F-{_1}$ mice were stimulated with gonadotropin, induced ovulation with hCG and mated. Two cell embryos were collected and cultured after exposure to among DMSO, EG, Glycerol, and 1,2-PROH. Embryo development was evaluated up to the blastocyst stage. The total cell count of blastocysts that were treated with DMSO and Glycerol at the 2-cell stage was significantly lower than that were treated with EG ($81.1{\pm}15.1$), 1,2-PROH ($88.0{\pm}21.1$) or the control ($99.9{\pm}21.3$) (p<0.001). On comparison of four cryoprotectant treated groups, the DMSO and Glycerol treated group showed a decreased cell count compared with the EG and 1,2-PROH treated group (p<0.05). Both DMSO ($14.7{\pm}1.3$), EG ($12.1{\pm}1.1$), Glycerol ($15.2{\pm}1.8$), and 1,2-PROH ($11.5{\pm}1.3$) treated groups showed higher apoptosis rates of cells in the blastocyst compared with the control ($6.5{\pm}0.7$, p<0.0001). In addition, the DMSO or Glycerol treated group showed more apoptotic cells than the EG or 1,2-PROH treated group (p<0.001). The potential toxicity of cryoprotectants was uncovered by prolonged exposure of murine embryos to among DMSO, EG, Glycerol, and 1,2-PROH at room temperature. When comparing four permeable cryoprotective agents, EG and 1,2-PROH appeared to be less toxic than DMSO and Glycerol at least in a murine embryo model.