• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.1
• /
• pp.45-50
• /
• 2013

Recently, as various devices including the smart phone, tablet and smart TV increase rapidly, it have been trouble to develop services separately, which are the same as in each device. When it comes to manufacture these kinds of web applications, what is worse, it takes too much time, cost ineffective and hard to maintain as well. In order to solve the non-unity of these flat forms, some researches for the responsive web design according as the hybrid framework are being progressed. In this paper, we analyzed the technologies and trends of the hybrid framework, and also implemented the responsive web contents which is based on hybrid framework.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.308-315
• /
• 2013

Water emulsion technology has the problem of unstable combustion due to the rapid separation of water. To solve the problem, a hybrid mixing device was developed. The device attached on the burner was tested. As a result, the fuel consumption reduced to 12% in the similar condition of exhaust emissions and flame temperature, and 45.5%, 98.5% and 97.2% of NOx, CO, and smoke were reduced at the same inlet air and fuel flow rate.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.7
• /
• pp.852-857
• /
• 2005

This paper discusses a human body extraction method for intelligent robot system. The intelligent robot system requires more robust silhouette extraction method because it has internal vibration and low resolution. The new hybrid silhouette extraction method is proposed to overcome this constrained environment. The temporal and gradient information is combined as hybrid silhouette. The motion region model is used to adjust combining parameters in hybrid silhouette. Finally, the experimental results show the superiority of the proposed method.

• Annual Conference of KIPS
• /
• 2012.11a
• /
• pp.288-289
• /
• 2012

최근 데이터 저장을 위한 고속 입출력에서 병목현상을 해결하기 위해 다양한 SSD(Solid State Drive) 관련 연구가 많이 수행되고 있다. 대표적인 것으로 비휘발성 메모리인 플래시와 차세대 반도체 메모리인 SCM(Storage Class Memory) SSD가 있고, 휘발성 메모리인 DRAM기반의 SSD가 있다. 플래시 또는 SCM 메모리기반 저장장치는 하드 디스크기반 저장장치에 비해 읽기 속도가 빠르며, 내구성이 강하다는 장점으로 새로운 저장장치 시스템의 저장매체로 부각되고 있으나, 단위 저장 공간 당 높은 가격으로 인해 저장장치 시스템에 적용하기 에는 많은 문제점이 있다. 최근에는 이러한 문제를 해결하기 위해 고용량의 하드디스크와 SSD를 RAID 또는 단일 저장장치 매체로 구성하는 하이브리드 저장장치에 관한 연구와 제품이 출시되고 있다. 본 논문에서는 이러한 하이브리드 저장 매체 어레이를 저장장치 시스템으로 구성하기 위한 볼륨구성과 해당 서버에 볼륨 제공 서비스를 수행하기 위한 하이브리드 저장장치 시스템 설계 방법에 대해 설명한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.276.1-276.1
• /
• 2016

본 연구에서는 차세대 유연 투명 히터 (Flexible and transparent heater) 제작을 위한 ATO 나노입자-은 네트워크 하이브리드 투명 전극의 특성을 연구하였다. 최적화된 은 네트워크 (Self-assembled Ag network) 투명 전극 상에 20-30 nm의 직경을 가지는 ATO (Sb-doped $SnO_2$) 나노입자를 스프레이 방식으로 상압, 상온에서 코팅하여 인쇄형 ATO-은 네트워크 하이브리드 투명 전극을 구현하였다. 스프레이로 코팅된 투명 ATO 나노 입자는 은 네트워크 전극의 빈 공간을 매워 줌으로써 은 네트워크 간의 연결성 및 표면 조도를 낮춰주어 유연 투명 히터 작동 시 전류의 집중 현상을 막아줄 수 있다. ATO-은 네트워크 하이브리드 투명 전극의 최적화를 위해 스프레이 횟수에 따른 하이브리드 투명 전극의 전기적, 광학적, 표면 특성을 분석하였으며, 최적의 조건에서 14 Ohm/square의 면저항과 66%의 투과도를 가지는 하이브리드 투명 전극을 구현하였다. 또한 FESEM 분석을 통해 ATO-은 네트워크 하이브리드 전극의 표면 및 계면 구조를 연구하고 ATO 코팅이 은 네트워크 전극의 특성에 미치는 영향을 규명하였다. 최적화된 ATO-은 네트워크 하이브리드 투명 전극을 이용하여 유연 투명 히터를 제작하고 전압에 따른 히터의 온도의 변화를 측정하여 차세대 유연 투명 히터용 투명 전극으로 인쇄기반 ATO-은 네트워크 하이브리드 투명 전극의 가능성을 확인하였다.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.360-371
• /
• 2011

T-DMB hybrid data service provides advanced data services while maintaining backward compatibility with legacy T-DMB receivers by using hybrid BIFS technology enabling distributed delivery of scene description information and object description information. This paper presents the hybrid service authoring framework implementing hybrid BIFS technology for creating contents for distributed delivery, and the results of experiments by using it. Hybrid service authoring framework is comprised of service creation system, service management system, and contents offering system. It enables the creation of combined hybrid data service and the splitting of the contents into two parts for ecah delivery network, data for broadcasting network and the data for mobile network. It also enables the managements of the contents. The feasibility of advanced data services while maintaining backward compatibility with the legacy T-DMB receiver has been proved by the contents created by using the hybrid authoring framework presented in this paper.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.513-524
• /
• 2016

The purpose of this study was to open two classes with the name of $21^{st}$ Leadership, run with two different hybrid teaching styles which are hybrid LZ type and hybrid lz type, and compare them with each other in order to analyze their effectiveness of hybrid model of the subject. The subjects of this study were 64 students who took these classes, and statistical analysis were analyzed through SPSS 21.0 program. As a result of the analysis, first, there were significant development in terms of the knowledge of leadership in both LZ and lz model. but the result of final exam in the group lz was shown only significant development. Second, in the case of unconditional self-acceptance there was significant development only in the group lz. Third, the development of leadership skills was shown only in the group lz. Implications of these results were concluded that the lz is more suitable for the subject of $21^{st}$ Leadership because this model can provide much more opportunities to develope interpersonal relationship skill than LZ model. In addition, suggestions for future research were discussed.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.113-125
• /
• 2021

This research has the purpose to approach 'Audience participation theatre' through applying the concept of 'Hybrid' which newly come to the fore after 21st in a theatre space. In fact, 'Hybrid' has been suppling crucial power to create and pass a culture down for a long time, and it could not different to a theatre space. The hybridity in previous traditional theatre which is central 'text' and 'architectural theater' is limited movement only on the stage, such as 'an actor between presence and absence', 'a theatrical time between real and fiction' and 'an objet between An Sich(thing itself) and Fur Sich(thing with inner meaning). However after 20st's 'Avant-Garde' with 'decomposition sprit', the hybridity become broader from only on the stage to entire theatre space including auditorium caused by collapse the boundary between auditorium and stage. In other words, 'auditorium' and 'audience' are considered as 'a theatrical element' coequal with other elements, and it can create various special results through they are mixed equally. Therefore, 'Audience participation theatre' could regarded a kind of hybrid phenomenon between 'auditorium and audience' and 'actor and stage' which are most disparate relation, and it is also approached 'hybridized audience', 'hybridized space' and 'hybridized text' as a new identity.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.857-861
• /
• 1994

UV curable hybrid systems have been investigated in the urethane acrylate based formulations where potentially irritant acrylate monomers have been substituted by vinyl ethers. Generally, among the systems studied, coating properties of hybrid system are superior to those of free radical hut inferior to those of cationic systems. When the content of acrylic oligomer is above 70%, however, hybrid system could render an excellent combination of coating and curing properties which outperforms both cationic and free radical systems. Photo-DSC has been used to follow the progress of crosslinking of various coating systems. Results imply that the critical factors in determining the curing rates of coating formulations are different depending upon the formulation characteristics. In the same type of hybrid formulations, the monomer/oligomer ratio rather than photoinitiator efficiency is the critical factor determining the curing rate of the systems.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.72-78
• /
• 2003

In this paper, the feasibility study and the parametric design of hybrid motor with HTPB/LOX were conducted for micro air launch system. Design results were compared with 1st stage of Pegasus XL for verification of hybrid motor. Results showed that hybrid motor replace solid booster if Isp of hybrid motor reaches 330sec. In addition, mission analysis was established for micro air launch system, and parametric design was conducted with design variables: number of port, initial oxidizer flux, and chamber pressure. And the region of Isp was identified by parametric study which satisfied design constraints and mission analysis.