• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.242-242
• /
• 2003

DLC(Diamond-Like Carbon)는 높은 경도, 내마모성, 화학적 안정성, 생체친화성 및 열전도율이 우수하여 VTR 헤드드럼, CRT Gun, Video Tape, 인공골절, 면도날 등에 널리 사용되고 있다. 에어컨용 Al 냉각핀은 높은 냉각성능의 향상으로 인한 전기절전 효과와 내부식성 및 친수성 등이 요구된다. DC-Sputtering법에 의한 에어컨용 알루미늄 냉각핀에 인가전압의 변화 (300V, 500V, 600V)와 증착시간 (3시간, 5시간 증착)의 변화에 따른 DLC 박막을 합성하여 AFM, XRD 및 Raman spectroscopy 측정을 통하여 분석하고, Micro Vickers Hardness 및 Roughness 등을 측정하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.1
• /
• pp.91-100
• /
• 1998

본논문에서는 현재 다 핀용 패키지로 주종을 이루고 있는 기존의 PQEP의 성능을 향상시키기 위하여 스트립 라인 배선 구조를 갖는 새로운 PQEP를 제안하였다. 기존의 208 핀 PQFP와 제안한 208핀 PQFP의 전기적 특성을 Ansoft사의 Maxwell TMA사의 Raphael 과 Avanti사의 HSPICE를 이용하여 시뮬레이션하여 비교하였다. 새로운 패키지에서는 신호 선과 파워버스라인을 스트립 구조로 만들고 감결합커패시터를 장착하여 크로스톡 잡음과 스 위칭 잡음을 크게 감소시켰다. 패키지의 리드프레임을 스트립구조로 만들기 위하여 구리가 도포된 유연성 쿠폰을 리드프레임의양측면에 부착하였다. 신호선의 특성 임피던스는 쿠폰의 유전층 두께변화를 조절함으로써 최적화하였고 유전층 두께가 100$\mu$mdlfEo 45$\Omega$의 값을 얻 었다. 시뮬레이션 결과와 측정결과 32개의 소자가 동시에 스위칭하고 전원/접지핀이 전체 리드 수의 33%일 때 동작주파수가 330Mhz됨을 확인하였으며 이는 기존 PQFP의 최대 동 작주파수인 100MHz에 비하여 3배 이상 향상됨을 보였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.8
• /
• pp.683-690
• /
• 2004

A modified rectangular fin is analyzed by two-dimensional analytic method and finite difference method. Relative error of heat loss from the modified rectangular fin between analytic method and finite difference method is presented. Comparisons of fin effectiveness and heat loss between a modified rectangular fin and a plane rectangular fin are made as a function of the non-dimensional fin length and wing height for different positions of wings by using analytic method. The ratio of the incremental rate of heat loss to that of the area of a modified rectangular fin is shown as a function of the wing height. One of the results shows that performance of a modified fin is more improved as the wing approaches the fin root.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.3
• /
• pp.292-300
• /
• 1999

Fin conduction not only enhances heat transfer to the ambient air but also increases tube-to-tube conduction. The latter is known to deteriorate the heat exchanger performance. Heat conduction between neighboring tubes thorough the fin is numerically investigated for accurate performance analysis of plate finned-tube heat exchangers. Governing equations for arbitrary plate fin are solved and the temperature distribution is obtained using the principle of superposition. Analysis is made using finite element method by changing the shapes of fin, the arrangements of tubes and the fin parameter mD. It is found that tube-to-tube conduction is significant when mD is small or the distance between neighboring tubes is small.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.3
• /
• pp.280-286
• /
• 2004

An experimental study is peformed to examine the heat transfer performance of individual rows of fin-tube heat exchangers. The heat transfer performance is measured using an air-enthalpy type calorimeter. The examined heat exchangers consist of 7mm tube and fin patterns of them are slit and louver types. Equivalent fin spacings are 18 fins per inch(fpi) for all samples, and the number of tube rows are two. In order to confirm that thermal boundary condition on fins of each row are the same, physically separated between two rows as well as connected heat exchangers are used. The frontal air velocity is varied from 0.7 to 2.5㎧. Heat transfer performance for each row is measured. It is observed that the heat transfer coefficient of the second row is smaller than that of the first row at low Reynolds number while larger at high Reynolds number.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.239-252
• /
• 2016

Two-dimensional materials offer unique characteristics for membrane applications to water technology. With its atomic thickness, availability and stackability, graphene in particular is attracting attention in the research and industrial communities. Here, we present a brief overview of the recent research activities in this rising topic with bringing two membrane architecture into focus. Pristine graphene in single- and polycrystallinity poses a unique diffusion barrier property for most of chemical species at broad ambient conditions. If well designed and controlled, physical and chemical perforation can turn this barrier layer to a thinnest feasible membrane that permits ultimate permeation at given pore sizes. For subcontinuum pores, both molecular dynamics simulations and experiments predict potential salt rejection to envisage a seawater desalination application. Another novel membrane architecture is a stack of individual layers of 2D materials. When graphene-based platelets are chemically modified and stacked, the interplanar spacing forms a narrow transport pathway capable of separation of solvated ions from pure water. Bearing unbeknownst permeance and selectivity, both membrane architecture - ultrathin porous graphene and stacked platelets - offer a promising prospect for new extraordinary membranes for water technology applications.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.185-190
• /
• 2015

In this paper we characterized and designed the waveguide antipodal finline transition at 57-65GHz frequency band in V-band for 5G mobile communication systems. Especially, we proposed the design method of spline taper for finline tapers by means of increasing curvature from linear taper. We could perform optimization more effectively by excluding improper regions for optimal performance from optimization using the method. Return losses and insertion losses of antipodal finline transitions were mainly affected by the taper shape of the finline. The resonances in the structure of the finline transition were the strongest enemies who deteriorate the performance of the transition. And we alleviated the resonances using semicircle shaped patch. The designed antipodal finline transition showed good performance as it showed less than -24.2dB of return loss and -0.24dB of insertion loss in the band(57-65GHz) which we suppose to use.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2059-2066
• /
• 2001

In this paper, we proposed a method to reduce the number of input pins in one-dimensional VLSI array for fractal image compression. We use quad-tree partition scheme and can reduce the number of the input pins up to 50% by sharing the domain\`s and the range\`s data input pins in the proposed VLSI array architecture. Also, we can reduce the input pins and simplify the internal operation circuit of the processing elements by eliminating a few number of bits of the least significant bits of the input data. We simulated using the 256$\times$256 and 512$\times$512 Lena images to verify performance of the proposed method. As the result of simulation, we can decompress the original image with about 32dB(PSNR) in spite of elimination of the least significant 2-bit in the original input data, and additionally reduce the number of input pins up to 25% compared to VLSI array sharing input pins of range and domain.

• Applied Chemistry for Engineering
• /
• v.32 no.2
• /
• pp.157-162
• /
• 2021

In this study, 3D printing filaments using recycled polypropylene (rPP) were produced by a single screw extruder. Graphene composite filament was also prepared using electrochemically exfoliated graphene (EEG) as a composite filler by adding 10, and 20 wt% of EEG to rPP. The graphene and rPP were successfully dispersed with great homogeneity, so that 3D filaments were uniformly produced, and their thermal properties increased as the graphene content increased. The mechanical property was also improved when EEG was 10 wt% but decreased when EEG was 20 wt% compared to that of rPP. 3D structures were successfully manufactured using prepared 3D filaments by a conventional 3D printer, and great advantages can be expected in terms of environmental and economical perspective by adopting plastic waste.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.523-528
• /
• 2013

In this experiment, we investigated the performance of two types of heat sink, swaged- and extruded-type, used in the inverter of industrial electricity generator. The swaged-type heat sink has 62 fins, and the extruded-type has 38 fins having the same dimension as that of the swaged-type. But the extruded-type heat sink maintains the same heat transfer area by the laterally waved surface which has 1 mm in radius. As a result, the swaged- and extruded-type heat sinks released 70.7% and 63.8% of the heat incoming to the heat sink, respectively. The other incoming heat were naturally convected and radiated to the ambient. In spite of 40% decrease in number of fins, the heat release performance of the extruded-type heat sink was lowered only 6.9% than that of the swaged-type. We believe that, this shows the increment of effective heat transfer area by the laterally waved surface of fins and the better heat transfer property of the extruded-type heat sink.