• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.15-18
• /
• 2007

RoF 링크 시스템을 적용한 무선 근거리 통신망(IEEE 802.11b/g)의 중심 주파수 대역인 2.4 GHz에서 저가의 Febry-Perot 레이저 다이오드를 이용한 피드포워드 광송신기를 제작 및 측정 하였다. 제작된 피드포워드 광송신기의 측정 결과는 2.4 GHz에서 주신호의 간격이 10 MHz이고 크기가 -4 dBm인 입력 신호에서 피드포워드 보상기법을 적용하기 전보다 3차 상호 변조 왜곡 신호가 22.9 dB 개선되었다. 제작된 피드포워드 광송신기의 전자소자의 사양을 바탕으로 송신기 집적을 위한 RFIC회로(감쇄기, 증폭기)를 0.18 ${\mu}m$ 공정을 이용하여 설계하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.19-21
• /
• 2007

디지털용 Uncooled DFB 레이저 다이오드를 이용하여 광대역 아날로그 피드포워드 광송신기를 제작하였다. 광송신기의 상호변조왜곡 성분 및 잡음성분을 제거하기 위해 광 피드포워드 보상기법을 사용하였으며, 다중서비스를 위해 $2.05{\sim}2.60$ GHz(550 MHz)에서 상호 변조왜곡 성분이 10 dB 이상 억제되었고, 상대강도잡음은 1.5 dB 이상 억제되었다. 2.3 GHz 에서 3 차 상호변조왜곡성분이 21.3 dB, SFDR 이 7.11 dB 향상된 결과를 얻었다. 또한 단일 모드 광섬유 전송 실험을 통해 전송길이에 따른 3 차 상호변호 왜곡성분의 크기 변화를 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.33-39
• /
• 2008

We have experimentally demonstrated the transmission performance of a feedforward optical transmitter using an external light injection technique. The feedforward compensation method shows 31 dB intermodulation distortion suppression and 2.2 dB noise reduction. A high side-mode suppression ratio exceeding 35 dB of the wavelength of the locked Fabry-Perot laser diode was obtained over 12 nm ranges. The suppression characteristics of the intermodulation distortion for various wavelength differences and transmission lengths were measured and analyzed as the evaluation criteria for the system performance in WDM/SCM based radio-over-fiber systems.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.11
• /
• pp.934-943
• /
• 2018

In these days, demand for agile spacecraft is gradually increasing, due to the fact that agile spacecraft can improve mission capability. In this paper, an attitude control logic based on reaction wheels that can enhance agility of spacecraft is proposed. Three methods are suggested, and all three or part of them can be integrated to the existing attitude control system. First, a feedforward/feedback controller is introduced, and its pros and cons are provided, compared to the conventional feedback controller. Second, an attitude command generation method that fully utilizes torque/momentum capacities of reaction wheels is proposed. Third, a torque (current) control mode for internal wheel control is introduced. Numerical results verify that the settling time can be significantly reduced by employing the feedforward/feedback control method, especially for large angle maneuver.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2193-2196
• /
• 2003

기존의 멀티레이트 입력 (MRIC) 제어기는 제어 입력신호에 채터링 현상이 발생하여 추종응답에 리플이 발생하는 문제점이 있다. 이러한 리플현상을 해결하기 위해 피드포워드 보상기를 이용하여 이런 리플현상을 제거하는 방법이 제시되기도 하였다. 본 논문에서는 상태 공간에서 현재 추종기를 기반으로 리프팅 기법을 이용한 멀티레이트 입력제어기 설계를 소개한다. 본 제어기를 사용함으로써 제어입력 신호가 채터링이 생기지않음을 이산전달함수 관점에서 최종치 정리를 이용하여 증명한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.1-9
• /
• 2007

Linearity is the one of the most important features for analog-optic transmission system. In our research, the available bandwidth for the feed-forward compensation circuit is enhanced by using a 180 hybrid coupler in the circuit. The bandwidth having the decreased 3rd-order intermodulation distortion(IMD3) over 10 dB is extended over 200 MHz with the center frequency of 1.6 GHz. We performed an efficient bandwith measurement for the feed-forward compensation system, which uses the network analyzer instead of the traditional measuring system that uses two RF signal generators and the spectrum analyzer. We identify the usefulness of this method from experimental results. In this study, we used cheap digital-purpose laser diodes for economical aspect, which proves the efficiency of the proposed analog system. The spurious-free dynamic range is improved about 6 dB/Hz.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.7 no.3
• /
• pp.1-6
• /
• 2010

This paper deals with the issue of simple adaptive position control for a pump-controlled cylinder system. A fixed displacement pump is utilized instead of servo valve and its speed is controlled by AC motor. The whole control system is composed of a pair of interconnected subsystems, that is, a feedback control system and a feedforward control system. From experiments it is shown that position control using simple adaptive control can accomplish significant reduction in position tracking error comparing to a conventional PID control.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2014

This paper proposes a current harmonic compensation method for the grid-connected inverter, especially caused by the grid impedance. Grid impedance causes low order harmonics in the grid current and deteriorates power quality. This paper analyzes the negative impact of the grid impedance, and proposes an active feedforward compensation method. Proposing method verified through simulation and experiment with 3-phase 1.5kW voltage source inverter prototype.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.81-88
• /
• 2006

This paper describes a new linear operational transconductance amplifier (OTA). To improve the linearity of the OTA, we employ a mobility compensation circuit that combines the transistor paths operating at the triode and subthreshold regions. The common-mode control schemes consist of a common-mode feedback (CMFB) and common-mode feedforward (CMFF). The circuit enhances linearity of the transconductance (Gm) under the wide input voltage swing range. The proposed OTA shows ${\pm}1%$ Gm variation and the total harmonic distortion (THD) of below -73dB under the input voltage swing range of ${\pm}1.1V$. The OTA is implemented using a $0.35{\mu}m$ n-well CMOS process under 3.3V supply.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.65-72
• /
• 2001

This paper deals with a novel full digital control of the single-phase PWM(Pulse Width Modulation) inviter for UPS(Uninterruptible Power Supp1y). The voltage and current of output filter capacitor as a state variable are the feedback control input. In the proposed scheme a double deadbeat control consisting of minor current control loop and major voltage control loop have been developed In addition, a second order deadbeat currents control which should be exactly equal to its reference in two sampling time without error and overshoot is proposed to remove the influence of the calculation time delay. The load current prediction is achieved to compensate the load disturbance. The simulation and experimental result shows that the proposed system offers an output voltage with THD(Total Harmonic Distortion) less than 5% at a full nonlinear load.