• Journal of KIISE:Software and Applications
• /
• v.34 no.7
• /
• pp.625-634
• /
• 2007

Due to the software is getting complex and large, software architecture design is issued for success of project. In the design phase, selection of the suitable architectural approach is very important. In this thesis, we identify the architectural approach alternatives in the design phase. And the evaluation method to choose architectural approaches and the architecture design methodology integrated with that evaluation method are proposed In the proposed architecture evaluation method and the architecture design methodolody, we intend to raise reliability, completeness of design and reduce development costs.

• Annual Conference of KIPS
• /
• 2010.11a
• /
• pp.222-225
• /
• 2010

매년 국내 많은 기업 및 단체에서 정보시스템 관련 프로젝트를 수행하는데 막대한 비용을 지불하고 있으며, 2008 년 국내 소프트웨어 및 컴퓨터관련 서비스 생산액은 24 조 4 천억 원에 이르고 있다. 그 중 컴퓨터 관련 서비스(SI 및 SM 등) 비용이 약 20 조, 응용 SW 비용이 1 조 8 천억 원에 이르고 있으며, 많은 기업과 단체들이 필요에 의해 다양한 정보시스템을 도입하여 운영하고 있음에도 불구하고 그 성과에 대해서 만족하지 못하고, 또 다시 정보시스템을 도입하여 운영하는 등 많은 시행착오를 겪고 있다. 이것은 기업의 필요에 맞는 정보시스템을 계획하고 구축하는 것도 중요하지만 정보시스템의 활용수준을 평가하고 이슈 및 개선사항을 도출하여 잘 활용하는 것이 정보시스템 성공의 핵심적인 요소임을 간과하고 있기 때문이다. 본 연구의 목적은 현재 개발되어 운영중인 정보시스템의 응용 소프트웨어가 효율적으로 이용되는지에 대한 활용 수준 평가/진단을 위하여 정보시스템 활용도 평가에 대한 선행연구의 한계점을 살펴보고, 체계적이고 합리적인 응용 소프트웨어 활용도 평가 지표를 새롭게 제시하며, 국내 기업의 차세대 CRM 응용 소프트웨어 활용수준을 적용하고 평가하여 이슈 및 개선사항을 도출하는데 있다.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.9-15
• /
• 2023

The task of generating a reduced thermal model of a satellite must be performed at least once in a satellite project to shorten the time of orbital thermal analysis and perform thermal analysis coupled to a launch vehicle. Although there are various methods for generating a reduced thermal model, an intuitive and convenient iso-thermal mesh generation method is used the most widely in practice. However, there is still a lack of research on automation of the isothermal mesh generation method. In this paper, we proposed an automated generation method of satellite reduced thermo-mathematical model based on the isothermal mesh generation method considering temperature tolerance and fixed nodes. The proposed method was validated using three different temperature tolerance cases. The average temperature difference satisfied the guidelines of ECSS.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.369-370
• /
• 2022

최근 자율 운항 선박에 대한 관심이 높아지고 있다. 특히, MUNIN (Maritime Unmanned Navigation through Intelligence in Networks) 프로젝트를 계기로 자율 운항 선박에 대한 개발과 연구가 활발히 진행되고 있다. 또한 국제해사기구 IMO는 자율 운항 선박 시대에 대응하기 위해 자율 선박을 MASS (Maritime Autonomous Surface Ship)라 정의하고 선박 자율화 정도에 따라 4단계 등급을 제시하고 있다. 완전한 자율 운항 선박에 대한 요구조건을 만족하기 위해서는 항로 결정과 제어기술이 필수적이다. 본 연구에서는 여러 가지 기술 중 선박의 최적경로를 생성하는 기법을 다룬다. 기존에 최적항로를 생성하기 위한 방법으로는 A^*, Dijkstra와 같은 알고리즘들이 주로 사용되었다. 그러나 이와 같은 알고리즘은 섬이나 육지에 대한 충돌 회피는 고려하고 있지만 수심 및 연안 선박에 대한 규정들은 고려하지 않고 있어 실제로 적용하기에는 한계점이 있다. 따라서 본 연구에서는 안전을 위해 선박의 선저 여유 수심과, 해도에 규정되어 있는 선박 운항에 대한 여러 규정들을 반영하여 최적 항로를 생성하고자 한다. 최적 항로를 생성하기 위한 알고리즘으로는 강화학습 기반의 Q-learning 알고리즘을 적용하였다.

• Cartoon and Animation Studies
• /
• s.47
• /
• pp.217-239
• /
• 2017

The purpose of this research is to maximize the core competencies by objectively measuring the Behaviour Patterns of students in Comic-Animation major to understand the difference between individuals and to maximize one's merits which will improve the efficiency in education. Also through this research we could understand which aspects would be affected in both the satisfaction about the major based on Behaviour Patterns and the satisfaction of university life. According to the DISC Patterns, 41.7% of the students in Comic-Animation department shows that they were in Patterns I (Influence). And Patterns S (Steadiness) were 10% which was the lowest percentage in this survey. In the average of the subject's satisfaction aspect, the satisfaction of the professors' suggestion was 3.68 which was the highest. While the satisfaction of the administration service and welfare facility was 2.56 which was the lowest. The satisfaction rate based on DISC Behaviour Patterns shows a significant difference among the satisfaction of the department, the satisfaction of atmosphere in university and the satisfaction of the admin and welfare. Patterns I (Influence) was the highest the satisfaction in the major and the satisfaction of the university life while Patterns C(Criticalness) was the lowest. In particular, the importance of the I (Influence) is the most important factor, but it is essential that there is a slight decrease in the precision and accuracy of the work, and C(Criticalness) is shy and stressed, so they need to give positive communication and accurate advice. It is required to Comic-Animation department professor to analyse students' character based on Behaviour Patterns and a person's pros and cons for the career exploration and the employment consultation in order to have positive affect on employment rate. Also if the department's Behaviour Patterns construction were well utilized, it can improve the success rate of useful leadership and fellowship. it will improve the atmosphere in the department which will decrease the drop-out rate but increase the cohesion in the department which will lead to providing better result in the work and the project.

• 대한공업교육학회지
• /
• v.43 no.1
• /
• pp.158-176
• /
• 2018

The purpose of this study is to analyze the satisfaction of the manufacturing process and the satisfaction of manufacturing lesson in the lesson of model product manufacturing based on IoT(Internet of Things) for pre-service technology teachers. and we also analyzed 'smart farm' model production manufacturing among various products. The survey questionnaires with 8 questions to investigate satisfaction level of model manufacturing process, difficulties in manufacturing, and the satisfaction level of manufacturing lesson were collected from the 15 pre-service technology teachers and analyzed by using SPSS program. and The results of this study were as follows: First, the lesson satisfaction average level of pre-service technology teachers was high(M=4.22) in model product manufacturing process for the 'smart farm' model making based on the IoT. Second, the average satisfaction level of 'patent search and prior art search report writing education' was as high as 4.07. Therefore, the application of 'prior art search report writing education' showed that it helped to make the product. Third, the best high satisfaction level in the model production manufacturing procedure was 'education of inventive thinking method'(M=4.40). Therefore, the pre-service technology teachers showed that the 'education of inventive thinking methods' was very helpful from the idea design to the optimal selection of idea. The next order of satisfaction level was high(M=4.33) in 'design education and counseling' and 'guidance through selection of professor who guide the production manufacturing in addition to professors who are in charge of lesson'. Because they were helpful in solving the lack of knowledge of pre-service technology teachers. Fourth, satisfaction level with 'the presentation of model making results and exhibitions', 'presentations and participations of external event' was high (M = 4.13). Although the results of interviews with pre-service technology teachers showed that they suffered from lack of knowledge in various technologies, but it was an opportunity to learn things and felt a sense of accomplishment.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.73-81
• /
• 2011

The ultimate goal of construction is to complete the given work in the most economical and safest way within the required construction period while meeting the quality standards specified in the design drawing. There are a few characteristics of finish work. First, executed in subdivided processes, finish work involves a very diverse and complex structure. Second, there are no criteria for each segmented process with regard to the appropriate time of input. Third, it is not very necessary to set priorities for lead and lag works. This study intends to provide information on the completion of a project in accordance with the required duration by setting priorities in the delay of each detailed process of finish work to minimize delay in finish work. In this study, finish work is divided into wet work and other types of finish work, and the importance of each process is classified based on the given details of each process. In addition, the study employs a survey to analyze delay factors of a designer, a constructor, and a supplier. Using the survey results, the study sets priorities in delay of final work to provide information on the completion of an apartment project within the planned construction period.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.118-128
• /
• 2015

Recently BIM technology has been expanded for using in construction project. Due to the high-cost of BIM infrastructure development, lack of regulations, lack of process and so forth, usage of BIM has been delayed than initial expectations. In design phase, especially, collaboration based on BIM system has been a key factor for successful next generation building project. Through the analysis of current research trends about IT technologies, virtualization and BIM service, data exchange such as drawings, 3D model, object data, properties using cloud computing and virtual server system is defined as a most successful solution. The purpose of this study is to enable the cloud computing BIM server to provide several main functions such as editing models, 3D model viewing and checking, mark-up and snapshot in high-performance quality by proper design of VDI system. Concurrent client connection performance is a main technical index of VDI. Through testing of test-bed server client, developed VDI system's multi-connect control is evaluated. Performance-test result of BIM server VDI effect to development direction of cloud computing BIM service for commercialization.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.1 s.35
• /
• pp.66-77
• /
• 2007

With the electricity industry structure reformation of the government in April, 2001, Korea Power Electric Corporation was divided in to Korea water power nuclear power and 5 thermal power plant. After, various delivery method is introduced and applied for active profit creation according to the competition between each development companies for the public company privatization. However, the current situation does not satisfy the project participant by selecting the delivery method without reflecting the business goal and project characteristics of power plant construction business. The objective of this study is to research the influencing factors that should be considered to select the delivery method in thermal power construction business and develop a standard of selection of appropriate delivery method through questionnaire and interviews to establish a model to select the delivery method that fits the business goal of the subject of delivery. In the future, if the delivery method selection model suggested in this study is applied, it is expected to select the appropriate delivery method of power plant construction business by effectively reflecting the business goal, characteristics and demand of the delivery subject, and characteristics of the construction business apart from the existing customary practices that decided the delivery method dependent on the subjective and experience based judgement.

• Journal of Korean Society of Disaster and Security
• /
• v.7 no.2
• /
• pp.25-34
• /
• 2014

This study researches on global technology trend in each of composing technology, such as grouting material, grouting equipment, and construction management technology, which grouting technology has been founded upon to improve relatively inadequate domestic grouting technology and to establish the global standard for overseas expansion in the future. As far as grouting material is concerned, while High-Penetration and High-Strength micro cement ($1.5{\mu}m$) has been developed in 2000's in Japan, JinChun Kim et al. (2014) has been developing hybrid type micro cement grouting material and examining specifications of different kinds of projects and countries to analyze the trend of grouting equipment development. The specification contains detailed requisite specification for materials, mixers, pumps, agitators, and packers and it has to satisfy the standard of different countries to win global contracts. Grouting management technology can be divided into four different generations and Scandinavian countries, such as Sweden, Norway, and Finland, Japan, and South Korea are recently doing vigorous researches on the Fourth generation which merges grouting technology with ICT.