• Knowledge Management Research
• /
• v.24 no.4
• /
• pp.103-129
• /
• 2023

This study aims to analyze the network structure of technological innovation resources in SMEs, especially manufacturing firms, and reveal the differences between innovative and non-innovative firms. The study first analyzes connection centrality, flow-mediated centrality, and power centrality for all firms, and derives structural equivalence through CONCOR analysis. Then, the network structure of innovative and non-innovative firms was compared and analyzed according to innovation performance and creation. The results show that entrepreneurship and corporate innovation strategy have a significant impact on the analysis of technological innovation resources of all firms. According to the CONCOR analysis, the innovation resources of SMEs are organized into seven clusters, which can be defined as intrinsic product innovation resources, competitive advantage promotion resources, cooperative activities resources, information system resources, and innovation protection resources. The network analysis of innovative and non-innovative firms showed that innovative firms focused on enhancing competitiveness and improving quality, while non-innovative firms tended to focus more on existing products and customers. In addition, innovative firms had eight clusters, while non-innovative firms had six clusters, suggesting that innovative firms utilize resources diversely to pursue structural change and new value creation, while non-innovative firms operate technological innovation resources in a more stable form. This study emphasizes the importance of entrepreneurship and corporate innovation strategy in SMEs' technological innovation, and suggests that strong internal efforts are needed to increase innovativeness. These findings have important implications for strategy formulation and policy development for technological innovation in SMEs.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.6
• /
• pp.479-493
• /
• 2023

The need for safety management has arisen due to the increasing number of years of operated underground structures, such as tunnels and utility tunnels, and accidents caused by those aging infrastructures. However, in the case of privately managed underground utility ducts, there is a lack of detailed guidelines for facility safety and maintenance, resulting in inadequate safety management. Furthermore, the absence of basic design information and the limited space for safety assessments make applying currently used non-destructive testing methods challenging. Therefore, this study suggests non-destructive inspection methods using ultrasonic and impact-echo techniques to assess the quality of underground structures. Thickness, presence of rebars, depth of rebars, and the presence and depth of internal defects are assessed to provide fundamental data for the safety assessment of box-type general underground structures. To validate the proposed methodology, different conditions of concrete specimens are designed and cured to simulate actual field conditions. Applying ultrasonic and impact signals and collecting data through multi-channel accelerometers determine the thickness of the simulated specimens, the depth of embedded rebar, and the extent of defects. The predicted results are well agreed upon compared with actual measurements. The proposed methodology is expected to contribute to developing safety diagnostic methods applicable to general underground structures in practical field conditions.

• Knowledge Management Research
• /
• v.25 no.2
• /
• pp.193-218
• /
• 2024

The current study investigated the factors influencing the buyer's repurchase intention for second-hand products. This study first identified perceived risk and purchase value as the two primary influencing variables. Additionally, some exogenous variables influencing these two variables were examined. Statistical analysis using Partial Least Squares (PLS) revealed that product uncertainty, seller uncertainty, and site trust had statistically significant relationships with perceived transaction risk. However, while economic benefit showed a significant impact on purchase value, product scarcity and resale value did not exhibit a significant relationship with purchase value. Perceived transaction risk was found to have an insignificant relationship with repurchase intention, but indirectly influenced repurchase intention through purchase value. Purchase value was identified as having a significant influence on repurchase intention. Therefore, it was concluded that purchase value is the most important factor influencing repurchase intention in the purchase of second-hand products, while transaction risk indirectly influences repurchase intention through purchase value. The study indicates that product uncertainty and economic benefit are the most significant exogenous factors influencing transaction risk and purchase value, respectively.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.52 no.3
• /
• pp.46-58
• /
• 2024

The purpose of this study is to understand the current status of the pet plant kit industry and determine the priorities for support policies to revitalize the industry. SWOT analysis assessed the industry's current state, and the Analytic Hierarchy Process (AHP) was used with industry professionals to prioritize support policies. The SWOT analysis results indicated that SO strategies involve leveraging government support policies to enhance marketing and developing eco-friendly DIY products. WO strategies include launching advertising campaigns to increase market recognition and establishing strategic partnerships to expand distribution. ST strategies focus on strengthening price competitiveness and proposing unique values, while WT strategies involve improving production processes and enhancing product quality based on consumer feedback. The AHP analysis identified 3 top-level and 12 sub-level evaluation items, with data collected from 17 expert surveys. The results showed the 'entry phase' (0.482), 'activation phase' (0.397), and 'advanced phase' (0.121) were prioritized, with 'organizing seminars' (0.181) as the most crucial subcategory and 'support for kit development' (0.020) as the least. The pet plant kit industry is in its early stages, and appropriate policy incubation can help activate the garden industry. This study provides foundational information on the industry's needs for activation.

• Journal of the Korean Society of Radiology
• /
• v.81 no.2
• /
• pp.272-289
• /
• 2020

Current advances in CT techniques allow thorough evaluation of the beating heart. The strengths of cardiac CT relative to echocardiography and magnetic resonance imaging are its high availability in most institutions, rapid production of high-quality images, and outstanding delineation of the anatomy. For many normal variants and pathologic conditions, such as thrombi, masses, and congenital abnormalities of the left atrium, CT findings are sufficient to make a presumptive diagnosis. Assessments of the left atrium and left atrial appendage are particularly important for the management of atrial fibrillation, as various catheter-based procedures are aimed at the mechanical and electrical isolation of these structures. CT offers information crucial to a successful catheter-based procedure or surgery. Therefore, a comprehensive review of the geometry (shape, size, and relative position), along with various CT imaging features of pathologic states, should be provided in radiology reports to be of clinical value.

• Journal of Ginseng Culture
• /
• v.6
• /
• pp.116-134
• /
• 2024

This study aimed to identify the issues in Korean ginseng exports through analyzing the ginseng market. Therefore, the study examined the current ginseng production status in South Korea and China, the major ginseng-producing countries in Northeast Asia, including cultivated areas, harvested areas, and production volumes. For South Korea, specific data on ginseng, such as average prices, operating costs, and production costs, were compiled to demonstrate the production competitiveness of Korean ginseng from a production perspective. Furthermore, as major ginseng-exporting countries, South Korea, China, and Hong Kong's export trends, including export quantities, export values, and export prices, as well as crucial export items and tariff rates, were summarized to showcase the export competitiveness of Korean ginseng. Additionally, this study aimed to understand the consumption patterns of ginseng in China, Hong Kong, and Taiwan by presenting various cases and events in these countries. Based on information related to production, export, and consumption, this study identified obstacles in the ginseng export process, including market downturns, weakened price competitiveness of Korean ginseng, increased market share of competing products like Chinese and Western ginseng, a lack of promotion and marketing, and insufficient development and export of various ginseng products. In response, strategies for overcoming these obstacles were proposed, including diversifying exports, establishing effective production systems, enhancing quality and branding, strengthening promotion and marketing efforts, and developing various ginseng products.

• Journal of Intelligence and Information Systems
• /
• v.22 no.1
• /
• pp.107-118
• /
• 2016

The advent of 5G mobile communications, which is expected in 2020, will provide many services such as Internet of Things (IoT) and vehicle-to-infra/vehicle/nomadic (V2X) communication. There are many requirements to realizing these services: reduced latency, high data rate and reliability, and real-time service. In particular, a high level of reliability and delay sensitivity with an increased data rate are very important for M2M, IoT, and Factory 4.0. Around the world, 5G standardization organizations have considered these services and grouped them to finally derive the technical requirements and service scenarios. The first scenario is broadcast services that use a high data rate for multiple cases of sporting events or emergencies. The second scenario is as support for e-Health, car reliability, etc.; the third scenario is related to VR games with delay sensitivity and real-time techniques. Recently, these groups have been forming agreements on the requirements for such scenarios and the target level. Various techniques are being studied to satisfy such requirements and are being discussed in the context of software-defined networking (SDN) as the next-generation network architecture. SDN is being used to standardize ONF and basically refers to a structure that separates signals for the control plane from the packets for the data plane. One of the best examples for low latency and high reliability is an intelligent traffic system (ITS) using V2X. Because a car passes a small cell of the 5G network very rapidly, the messages to be delivered in the event of an emergency have to be transported in a very short time. This is a typical example requiring high delay sensitivity. 5G has to support a high reliability and delay sensitivity requirements for V2X in the field of traffic control. For these reasons, V2X is a major application of critical delay. V2X (vehicle-to-infra/vehicle/nomadic) represents all types of communication methods applicable to road and vehicles. It refers to a connected or networked vehicle. V2X can be divided into three kinds of communications. First is the communication between a vehicle and infrastructure (vehicle-to-infrastructure; V2I). Second is the communication between a vehicle and another vehicle (vehicle-to-vehicle; V2V). Third is the communication between a vehicle and mobile equipment (vehicle-to-nomadic devices; V2N). This will be added in the future in various fields. Because the SDN structure is under consideration as the next-generation network architecture, the SDN architecture is significant. However, the centralized architecture of SDN can be considered as an unfavorable structure for delay-sensitive services because a centralized architecture is needed to communicate with many nodes and provide processing power. Therefore, in the case of emergency V2X communications, delay-related control functions require a tree supporting structure. For such a scenario, the architecture of the network processing the vehicle information is a major variable affecting delay. Because it is difficult to meet the desired level of delay sensitivity with a typical fully centralized SDN structure, research on the optimal size of an SDN for processing information is needed. This study examined the SDN architecture considering the V2X emergency delay requirements of a 5G network in the worst-case scenario and performed a system-level simulation on the speed of the car, radius, and cell tier to derive a range of cells for information transfer in SDN network. In the simulation, because 5G provides a sufficiently high data rate, the information for neighboring vehicle support to the car was assumed to be without errors. Furthermore, the 5G small cell was assumed to have a cell radius of 50-100 m, and the maximum speed of the vehicle was considered to be 30-200 km/h in order to examine the network architecture to minimize the delay.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.12-16
• /
• 2012

Purpose : In conventional PET image reconstruction, iterative reconstruction methods such as OSEM (Ordered Subsets Expectation Maximization) have now generally replaced traditional analytic methods such as filtered back-projection. This includes improvements in components of the system model geometry, fully 3D scatter and low noise randoms estimates. SharpIR algorithm is to improve PET image contrast to noise by incorporating information about the PET detector response into the 3D iterative reconstruction algorithm. The aim of this study is evaluation of SharpIR reconstruction method in PET/CT. Materials and Methods: For the measurement of detector response for the spatial resolution, a capillary tube was filled with FDG and scanned at varying distances from the iso-center (5, 10, 15, 20 cm). To measure image quality for contrast recovery, the NEMA IEC body phantom (Data Spectrum Corporation, Hillsborough, NC) with diameters of 1, 13, 17 and 22 for simulating hot and 28 and 37 mm for simulating cold lesions. A solution of 5.4 kBq/mL of $^{18}F$-FDG in water was used as a radioactive background obtaining a lesion of background ratio of 4.0. Images were reconstructed with VUE point HD and VUE point HD using SharpIR reconstruction algorithm. For the clinical evaluation, a whole body FDG scan acquired and to demonstrate contrast recovery, ROIs were drawn on a metabolic hot spot and also on a uniform region of the liver. Images were reconstructed with function of varying iteration number (1~10). Results: The result of increases axial distance from iso-center, full width at half maximum (FWHM) is also increasing in VUE point HD reconstruction image. Even showed an increasing distances constant FWHM. VUE point HD with SharpIR than VUE point HD showed improves contrast recovery in phantom and clinical study. Conclusion: By incorporating more information about the detector system response, the SharpIR algorithm improves the accuracy of underlying model used in VUE point HD. SharpIR algorithm improve spatial resolution for a line source in air, and improves contrast recovery at equivalent noise levels in phantoms and clinical studies. Therefore, SharpIR algorithm can be applied as through a longitudinal study will be useful in clinical.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1141-1153
• /
• 2010

This paper introduces ONLIS(Overlay Multicast Network for Live IPTV Service), a novel overlay multicast network optimized to deliver live broadcast IPTV stream. We analyzed IPTV reference model of ITU-T IPTV standardization group in terms of network and stream delivery from the source networks to the customer networks. Based on the analysis, we divide IPTV reference model into 3 networks; source network, core network and access network, ION(Infrastructure-based Overlay Multicast Network) is employed for the source and core networks and PON(P2P-based Overlay Multicast Network) is applied to the access networks. ION provides an efficient, reliable and stable stream distribution with very negligible delay while PON provides bandwidth efficient and cost effective streaming with a little tolerable delay. The most important challenge in live P2P streaming is to reduce end-to-end delay without sacrificing stream quality. Actually, there is always a trade-off between delay & stream quality in conventional live P2P streaming system. To solve this problem, we propose two approaches. Firstly, we propose DSPT(Distributed Streaming P2P Tree) which takes advantage of combinational overlay multicasting. In DSPT, a peer doesn't fully rely on SP(Supplying Peer) to get the live stream, but it cooperates with its local ANR(Access Network Relay) to reduce delay and improve stream quality. When RP detects bandwidth drop in SP, it immediately switches the connection from SP to ANR and continues to receive stream without any packet loss. DSPT uses distributed P2P streaming technique to let the peer share the stream to the extent of its available bandwidth. This means, if RP can't receive the whole stream from SP due to lack of SP's uploading bandwidth, then it receives only partial stream from SP and the rest from the ANR. The proposed distributed P2P streaming improves P2P networking efficiency.

• Journal of Nutrition and Health
• /
• v.53 no.2
• /
• pp.190-202
• /
• 2020

Purpose: This study aims to evaluate the recognition, purchase, and intake status of edible insects in adults, who are the main consumers of edible insects, and to provide the information necessary to expand the production and consumption of edible insects and related products in the future. Methods: A total of 453 adults (172 males and 281 females) aged 19 years and older were surveyed regarding their awareness of edible insects, purchase and consumption experience, and intention to purchase and consume, and the differences between them were analyzed according to gender and age groups. Data collection took place from December 2018 to January 2019. Results: Those who had knowledge of edible insects accounted for 87.0%, whereas those who had more than average knowledge were 75.9%, suggesting recognition was relatively high. Men had more experience than women in purchasing or consuming edible insects and related products (45.9% vs. 31.0%, p < 0.01). In terms of age, experience was 22.5% in 20-30s, 44.6% in 40-50s, and 63.1% in 60s and older, showing significant growth as age increased (p < 0.001). The satisfaction level of edible insects was highest in taste (3.4 points), and especially for shape and appearance, it decreased as age reduced (p < 0.001). The most common reason for not being willing to use edible insects was feeling repulsive (4.1 points), which was significantly more common in women than in men (4.3 vs. 3.9, p < 0.001), and lower with age (p < 0.001). The most needed information display for using edible insects was country of origin (63.8%), the main nutrient in edible insects was protein (93.6%), and the most preferred form of products was powder (39.5%). Conclusion: According to the above results, the recognition of edible insects was high, whereas experience of using edible insects and intention to use edible insects were low especially in women and younger groups. The reason for this is that consumers are dissatisfied with edible insects due to their appearance. This study is expected to be used as basic data for expanding the production and consumption of edible insects and related products in the future.