• The Journal of the Acoustical Society of Korea
• /
• v.23 no.2
• /
• pp.90-102
• /
• 2004

According to the Mutual Recognition Arrangement (MRA), the calibration and/or test laboratories should satisfy the management and technical requirements ISO 17025 or equivalent. Chapter 5, Section 5.10.4 of the technical requirement of ISO 17025 suggests the required informations for calibration certificates, one of them is to state the uncertainty of measurement. The uncertainties of measurement in reciprocity calibration of standard laboratory microphone were calculated. The expanded uncertainties for 1 and 1/2 inch microphones were 0.03 dB in the middle frequency range and they increased up to 0.10 dB and 0.11 dB at 20 Hz, 0.07 dB and 0.08 dB at high frequency, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.89-94
• /
• 2007

For successful implementation of multi-standard transmitter, reconfigurable architecture and component design are essential. This paper presents a reconfigurable CMOS power amplifier designed CMOS 0.25 um process. Designed power amplifier can be operated at 0.9, 1.2, 1.75, and 1.85 GHz. Also, it can be used at 2.4 GHz by using bonding wire inductor. The interstage matching network is composed of two inductors and four switches, and operation frequency can be varied by controlling switches. Proposed power amplifier can be used as a power amplifier in low power applications such as ZigBee or Bluetooth application and used as a driver amplifier in high power application such as CDMA application. Designed power amplifier has 18.2 dB gain and 10.3 dBm output power at 0.9 GHz. Also, it represented 10.3 (18.1) dB gain and 5.2 (10) dBm output power at 1.75 (2.4) GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.4 s.107
• /
• pp.387-392
• /
• 2006

In this paper, measurement scheme and uncertainty estimation of the K-band attenuation standard fitted with 3.5 mm coaxial connectors are described. The standard comprises a build-up chain of four steps of power ratio mea-surement and operates in the frequency range of 18 GHz to 26.5 GHz. The nominal attenuation of each step is around 20 dB and total dynamic range is 80 dB. The expanded uncertainty of the overall system is 0.01 dB at the confidence level of approximately 95%.

• 한국IT서비스학회:학술대회논문집
• /
• 2002.11a
• /
• pp.304-310
• /
• 2002

인터넷 기반의 B2B(Business to Business) 모델은 e비즈니스의 실현을 위한 기업의 정보시스템의 인프라와 같은 기반구조를 만들어가기 위한 기본 모델 역할을 하고 있다. 인터넷이 제공하는 표준 프로토콜을 기반으로 다양한 방식의 B2B 지원제품이 출시되고 있지만 그 어떤 제품도 기본적인 인터넷 프로토콜이 아닌 상위의 e비즈니스, 즉 다른 기업과의 협업이라는 관점에서 상호운용성을 보장하지 못하고 있으며 이 부분은 여전히 제품과 산업군에 매우 종속적이다. 이러한 단점을 해결하기 위하여 국제표준을 준수하며 BRB(Business- Registry- Business) 모델을 기반으로 한 글로벌 e비즈니스 솔루션인 XENI의 메세징 관련 제품과 레지스트리 관련 제품의 구현사례와 활용사례를 소개하고자 한다. 또한 국내의 취약한 SI 산업의 해결점이 될 수 있는 글로벌 솔루션 개발이라는 측면에서 향후 보완되어야 할 부분들을 제안한다.

• Journal of IKEEE
• /
• v.12 no.2
• /
• pp.95-101
• /
• 2008

In this paper, we study an optimum design of search synchronization structure for Baseband Modem to support ISO/IEC 18185-5 and 24730-2 Standard. For DSSS Modem, we design the code acquisition and tracking structure which are important in receiver operation, and examine the parameters to be considered. The data and PN chip transmission rates and processing gain of the proposed modem are 59.7 kbps, 30.521875 Mcps, and 27 dB, respectively. This indicates that the noise immunity of the proposed modem is 17dB better than IEEE 802.11b (Processing gain : 10dB). Therefore, we design the optimum structure for the modem search synchronization which is compatible to the proposed modem standard.

• Electronics and Telecommunications Trends
• /
• v.20 no.4 s.94
• /
• pp.110-119
• /
• 2005

본 고에서는 모바일 3D 그래픽스 기술에 대한 국내외 표준화 연구 활동과 표준화 발전전망에 관하여 기술하고 있다. 모바일 3D API 표준으로는 국제사실표준으로서 크로노스 그룹에서 OpenGL|ES를 제안하고 있어 국내에 많은 모바일 3D 콘텐츠 개발사에서 채택하고 있으며, 자바진영의 M3G(JSR-184) 표준은 응용 콘텐트에 사용하는 상위레벨의 API를 규정하고 있다. 국내에는 모바일 3D 표준화 포럼을 중심으로 MPEG-4SNHC의 3D 압축 프로파일 제안을 위한 TFT 활동과 국내 모바일 3D API 표준을 위한 TFT를 운영하며, 그 결과를 바탕으로 국제 표준화 활동 및 크로노스 그룹과의 긴밀한 협력을 진행하고 있다. 모바일 3D 표준화의 향후 전망으로는 프로그래머블 그래픽 파이프라인에 대한 API의 표준화와 데이터의 압축을 포함한 모바일 게임 데이터 포맷의 표준화, 모바일 3D 그래픽 API를 기반으로 한 상위 수준의 애니메이션, 3D 콘텐츠 제작에 필요한 API에 대한 표준화 및 미디어 프로세싱의 표준화 일환으로 진행되는 크로노스 그룹의 OpenMAX의 표준화 등이 활발하게 이루어질 것이다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.127-132
• /
• 2006

This paper presents a dual-mode amplifier which operates as amplifier or frequency multiplier according to the input frequency. It satisfies the 802.11a/b/g frequency band of wireless LAN standard. A conventional dual-band wireless LAN transmitter consists of the separating power amplifiers operating at each frequency band, but the proposed dual-mode amplifier operates as an amplifier for the 802.11b/g signal and as a frequency multiplier for the 802.11a signal according to each LAN bias condition. The amplifier mode shows the gain of 13dB, the PldB of 17dBm and second harmonic suppression of below -37dBc. And the frequency-doubler mode shows the gain of 3.3dB, the output power of 7.3dBm and third harmonic suppression of below -50dBr.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.79-83
• /
• 2018

An accurate method to measure shielding effectiveness(SE) of EMI spray coating film is presented. After high frequency simulating, Circular coaxial standard test fixture is fabricated. A sample of EMI spray coating film was fabricated for insertion into a circular coaxial standard test fixture. The measuring instrument used an Agilent 8722ES vector network analyzer for the SE measurement. The exact SE of copper and silver mixed spray coating sample was measured by the composition of the measuring instrument and the measuring sample. The SE of copper sample was measured at 70 dB and the SE of copper and silver mixed spray coating sample was measured at 60 dB. As a result of the measurement, the reliability of the circular coaxial standard test fixture was confirmed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.330-337
• /
• 2018

This paper proposes a technique to analyze the flatness characteristics of the attenuator at 10Hz to $50\text\tiny{MHz}$ on the basis of $1\text\tiny{kHz}$ using a Thermal Voltage Converter and AC measurement standard. In the proposed technique, the input voltage of the attenuator for each measuring frequency is supplied at the same rate as $1\text\tiny{kHz}$ using TVC, and the flatness characteristics of the attenuator are analyzed by the voltage variation indicated in the AC measurement standard. The results of the analysis of the attenuator flatness characteristics show that the maximum uncertainty of $866{\mu}V/V$ can be measured from $10\text\tiny{dB}$ to $70\text\tiny{dB}$ and the uncertainty is reduced by about 37% compared to $2.31\text\tiny{mV}$/V using the network measurement method. The improved attenuator flatness characteristic values can be applied to the frequency flatness calibration from 2.2V to 2.2mV at the low voltage of the AC measurement standard.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.76-84
• /
• 2002

In this paper, it is studied to remove the baseline wander and to minimize the distortion of ST segment in the noise filtering of ECG. In general, the standard filter and adaptive filter are used to remove the baseline wander of the ECG. But the standard filter is limited because the frequency of the baseline signal is variable and the apative filter is difficult to select the reference signal in case of using the adaptive filter. So we proposed a new method of the structure without reference signal using neural networks. To be convinced of the performance of this method, we used ECG data of MIT-BIHs. and obtained the result of the high performance,(-53.3[dB]) than standard filter(-16.3[dB]) and adaptive filter (-44.9[dB]).