• Journal of The Korean Association of Information Education
• /
• v.19 no.4
• /
• pp.499-508
• /
• 2015

As society evolves into the information society, major countries strengthen software education. Especially, the curriculums of school to enlarge software education are made in major countries. Therefore, Korea Association of Information Education (KAIE) have studied a standard model for software education and revised the standard model that was published in 2014. The KAIE suggested a new plan that contents of software education classify by 'Software', 'Computer System' and 'Convergence Activities.' Therefore, I studied on a curriculum for 'Information' topic in elementary school. In this paper, I suggested the achievement goals for education of 'Information' topic. I nextly suggested teaching-learning and evaluation methods to meet the achievement goals. And I expect that the achievement goals, teaching-learning and evaluation methods I suggested about 'Information' topic will contribute to develop the curriculum for software education.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.503-508
• /
• 2007

The Equipment Expenses section of the Poom-Saem, that is used for Construction Cost Estimation on public sectors in Korea, has been rarely revised, and so does not reflect changes of construction equipment technology and construction methods, since it was established based on data from Japan and the U.S in the early 1960s. In order to make reasonable estimation of maintenance costs(Interest, Storage, Insurance, Tax), the equipment expenses section of the Poom-Saem and the domestic and overseas documentary records were investigated. Further, 16 construction sites were visited, and 20 Construction Equipment leasing services were surveyed. Based on results from analysing figures related with the estimation of maintenance costs, the maintenance cost is redefined. Then, construction equipment was classified into 6 exclusive construction equipment and general one, and realistic figures of the maintenance cost, which consists of interest, storage, insurance, tax, are suggested respectively. The optimum level of each item which consists of equipment costs was revealed based on the result of the analysis on the figures of equipment costs calculation from the Poom-Saem and the collected data. The research will be the foundation that helps to estimate appropriate construction costs and the ground work of related studies.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.117-118
• /
• 2012

As the technical standard of hydrographic data was transferred from S-57 to S-101, a standard system was set up for producing the next generation ENCs but also various maritime safety information. ECDIS that display a S-57 ENC and include a navigation support function, should be developed considering new standard. S-10X data and e-Nav information can be used in this system. In this study, an implementation mechanism of S-100 standard was analyzed for design of navigation support system based on S-100. From the results, it was designed as loading module of S-10X data, display module of SENC, navigation supporting module. Also, this study considered a next generation ENC, a bathymetric grid data, an electronic nautical publication as an input information.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.271-278
• /
• 2019

This study compares the space depth and layout of a modern apartment floor plan (MAFP) and the standard floor plan of traditional Korean houses (STKHs), which has preserved the traditional beauty of Korea. Space Syntax was applied to compare the MAFP and STKH. The space within MAFP was more divided into many spaces than the STKH. In both types of floor plans, the living room space had the highest degree of integration and was used for central functions in the each floor plan. The STKH and the space in the MAFP have more segregated space than integrated space. In the STKH, the master bedroom and other rooms were found to be segregated space. However, the master bedroom of the MAFP was highly integrated space. The function of the thet maru has been greatly reduced in the STKH, and the numaru was classified as a highly segregated space. The evacuation space was the most segregated space in the MAFP. The STKH has been adapted and changed according to the trends of the times, and the MAFP reflects our traditional living habits.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.313-313
• /
• 2022

일반적으로 가뭄은 특정지역에서 평균 이하의 강수량이 발생되는 현상으로, 강수량이 감소되면 토양수분, 하천수 수위, 저수지 수위, 지하수위 등이 순차적으로 감소한다. 수문학적 가뭄은 기상학적 가뭄 및 농업 가뭄에 비해 늦게 발현되는데, 이는 강수량의 부족이 토양수분, 하천수량, 지하수 및 저수지 수위 등과 같은 수문학적 시스템에 전이되는 시간이 소요되기 때문이다. 따라서, 가뭄 피해를 경감하기 위해 지하수위 변동성을 이용하여 지하수 함양량을 추정함으로써 효율적인 수자원 관리의 필요성이 증대되고 있다. 지하수위는 농촌 지하수 개발, 가뭄 및 홍수 예측 등 다양한 분야에 활용되며, 강수량에 의한 변화가 지표수에 비해 느리게 나타나고 토양을 통과하는 특성으로 인해 단기 및 장기간의 변화 경향이 나타난다. 미국 지질조사국 (United States Geological Survey)에서는 지하수위를 월 단위로 보통 이하 (Below-normal), 보통 (Normal), 보통 이상 (Above-normal) 3단계로 구분하여 분포도를 작성하고 전체 관측기간 중 25% 이상에서 보통 이하 (Below-normal)로 나타나면 가뭄으로 판단한다. 우리나라의 경우 지형, 유역을 고려한 지하수 수위 및 수질 현황과 변동성을 파악하기 위하여 전국 지하수위 관측망 688개소를 설치하고 운영 중에 있다. 또한, 농촌진흥청에서는 전국 농업기상대와 연계하여 토양수분관측망 (soil moisture monitoring network)을 구축하였으며, 표토 10 cm에 토양수분센서를 전국 168 지점에 설치하여 운영하고 있다. 본 연구에서는 강수량을 기반으로 산정한 표준강수지수 (Standardized Precipitation Index, SPI)와 지하수위를 기반으로 산정한 표준지하수위지수 (Standardized Groundwater Level Index, SGI), 토양수분관측망의 토양수분의 상관 분석을 수행하고자 한다. 밭작물 가뭄의 중요 요소인 토양수분 함량은 강수에 즉각적으로 반응하는 반면 지표수 및 지하수는 상대적으로 장기간의 강수에 영향을 받기 때문에, 본 연구의 결과는 향후 밭작물 지역의 가뭄 취약성을 관리하는 지표로 활용이 가능할 것으로 사료된다.

• Korean Journal of Remote Sensing
• /
• v.32 no.2
• /
• pp.119-131
• /
• 2016

Descriptions are provided of the automated aerosol-type classification and mass concentration calculation algorithm for real-time data processing and aerosol products in Korea Aerosol Lidar Observation Network (KALION, http://www.kalion.kr). The KALION algorithm provides aerosol-cloud classification and three aerosol types (clean continental, dust, and polluted continental/urban pollution aerosols). It also generates vertically resolved distributions of aerosol extinction coefficient and mass concentration. An extinction-to-backscatter ratio (lidar ratio) of 63.31 sr and aerosol mass extinction efficiency of $3.36m^2g^{-1}$ ($1.39m^2g^{-1}$ for dust), determined from co-located sky radiometer and $PM_{10}$ mass concentration measurements in Seoul from June 2006 to December 2015, are deployed in the algorithm. To assess the robustness of the algorithm, we investigate the pollution and dust events in Seoul on 28-30 March, 2015. The aerosol-type identification, especially for dust particles, is agreed with the official Asian dust report by Korean Meteorological Administration. The lidar-derived mass concentrations also well match with $PM_{10}$ mass concentrations. Mean bias difference between $PM_{10}$ and lidar-derived mass concentrations estimated from June 2006 to December 2015 in Seoul is about $3{\mu}g\;m^{-3}$. Lidar ratio and aerosol mass extinction efficiency for each aerosol types will be developed and implemented into the KALION algorithm. More products, such as ice and water-droplet cloud discrimination, cloud base height, and boundary layer height will be produced by the KALION algorithm.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.3
• /
• pp.465-482
• /
• 2016

Previous researches have introduced various ways to analyze the impact of standardization on innovation while the works are not only small in number but based on interview or case study. This paper addresses the impact of standardization activities within South Korean industries on technological innovation applying an empirical analysis of standardization activities and technological innovation. Drawing on Korean Industrial Standards Classification from panel data of 2003 to 2012, we employed corresponding data of each industrial classification: Number of standards, Accumulated number of standards, Number of patents applied in Korea, Sales, Operational profit, Intangible asset, and R&D invest. In the first model, we run panel data models employing the number of patents applied in Korea as an independent variable, and the number of standards, accumulated number of standards, sales, and operational profit as dependent variables to observe industrial impacts upon the relationship between standards and patents, along with time lagged consideration. The result shows that number of standards are revealed to have a negative influence on patent applications in the year of research, and no significant effect appears for the next two years while positive effect shows up on the third year. Meanwhie, accumulated number of standards turned out to have positive effects on patent applications in Korea. This implies it takes time for innovation subjects to embrace newly established standards while having a significant amount of positive effect on technological innovation in the long term. In the second model, we use canonical correlation analysis to find industrial-wide characteristics. The result of this model is equivalent to the result of panel data analysis except in a few industries, where some industry specific characteristics appear. The implications of our results present that Korean policy makers have to take account of industrial effects on standardization to promote technological innovation.

• Korean Journal of Food Science and Technology
• /
• v.41 no.3
• /
• pp.258-264
• /
• 2009

The principal objective of this study was to estimate the measurement uncertainty associated with determination of deoxynivalenol (DON), a mycotoxin generated by Fusarium strain, in food. In service of this goal, wheat as a food matrix was analyzed via high performance liquid chromatography-ultraviolet (HPLC-UV) detection using an immunoaffinity column for clean-up. The uncertainty sources in the measurement process were identified by sample weight, final volume, and sample concentration in extraction volume with components including standard stock solution, working standard solution, 5 standard solutions, calibration curve, matrix, and instrument. The expanded uncertainty for DON at a concentration of 300 ${\mu}g/kg$ was estimated as 71.62 ${\mu}g/kg$ using a coverage factor of two, which provides a confidence level of approximately 95%. The most influential component in the uncertainty sources was the recovery of the wheat matrix, followed by the calibration curve. These results indicate that all efforts may be directed toward reducing the uncertainties of the recovery of the wheat matrix and the calibration curve to obtain a reliable HPLC-UV method for DON analysis in wheat.

• Informatization Policy
• /
• v.30 no.4
• /
• pp.40-61
• /
• 2023

The adoption of smart factories and smart manufacturing as strategies to enhance competitiveness and stimulate growth in the manufacturing sector is vital for a country's future competitiveness and industrial transformation. The government has consistently pursued smart manufacturing innovation policies starting with the Manufacturing Innovation 3.0 strategy in the Ministry of Industry. This study aims to identify policy areas for smart factories and smart manufacturing based on technical standards. Analyzing policy areas at the current stage where the establishment and support of domestic standards aligning with international technical standards are required is crucial. By prioritizing smart manufacturing process areas within the industry, policymakers can make well-informed decisions to advance smart manufacturing without blindly following international standardization in already well-established areas. To achieve this, the study utilizes a hierarchical analysis method including expert interviews and importance-performance analysis for the five major process areas. The findings underscore the importance of proactive participation in standardization for emerging technologies, such as data and security, instead of solely focusing on areas with extensive international standardization. Additionally, policymakers need to consider carbon emissions, energy costs, and global environmental challenges to address international trends in export and digital trade effectively.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.64-65
• /
• 2014

신재생에너지원의 급속한 보급, 고신뢰 및 고효율 전원망에 대한 고객의 요구, 디지털부하의 급증 등 기술적 사회적 환경의 변화에 따라 직류배전망에 대한 관심이 높아지고 있다. 이에 따라 직류배전망의 안전성에 대한 문제도 지속적으로 제기되고 있다. 특히 지락, 단락사고, 절연고장, 낙뢰, 아크, 전식 등으로부터 인체 감전과 기기의 소손, 정지 또는 오동작이 발생될 수 있으며 이로 인해 심각한 문제를 야기될 수 있다. 국제표준 IEC 60364에서는 전기설비에 따른 접지시스템을 TT, TN 및 IT접지의 3가지로 분류하고 있다. TN접지방식은 전원선과 설비외함의 노출 도전부를 보호도체를 사용하여 공통으로 접지하는 계통을 말한다. 따라서, 전원선이 외함에 접촉되거나 인체의 감전에 의한 누전사고가 발생하였을 때 전원선 전체를 통하여 흐르는 전류의 차이를 검출함으로서 사고전류의 검출이 즉각 이루어 질 수 있다. 교류계통에서는 영상전류검출기에 의하여 누설전류의 검출이 가능하지만 직류계통에서는 영상전류검출기를 사용할 수 없으므로 새로운 방식의 누전검출장치의 개발이 요구된다. 또한 감전 사고는 인체의 사고와 설비의 사고 두 가지로 구별되며, 효율적인 전력운영과 안전을 위하여 두가지 사고에 대해 통합적으로 구분 동작이 가능한 누설전류 검출기 개발이 요구된다. 본 연구에서는 TN접지계통에서 직류누설전류 검출이 가능한 홀 센서(HCT)를 사용하여 인체 및 설비의 누설전류 패턴에 따라 구분 동작이 가능한 직류용 누설전류 검출기 개발에 관한 연구를 수행하였다.