• Journal of the Korean Vacuum Society
• /
• v.19 no.1
• /
• pp.22-27
• /
• 2010

To improve surface wettability, each sample was treated by atmospheric pressure plasma (APP) using dielectric barrier discharge (DBD) system. Argon and oxygen gases were used for treatment gas to modify the $TiO_2$ surface by APP with RF power range from 50 to 200 W. Water contact angle was decreased from $20^{\circ}$ to $10^{\circ}$ with argon only. However, water contact angle was decreased from $20^{\circ}$ to < $1^{\circ}$ with mixture of argon and oxygen. Water contact angle with $O_2$ plasma was lower than water contact angle with Ar plasma at the same RF power. It seems to be increasing the polar force of $TiO_2$ surface. Also, analysis result of X-ray photoelectron spectra (XPS) shows the increase of intensity of O1s shoulder peak, resulting in increasing of surface wettability by APP. Moreover, each water contact angle increased according to increase past time. However, contact angle increase with plasma treatment was lower than without plasma treatment. Additionally, the efficiency of $TiO_2$ photocatalyst was improved by plasma surface-treatment through the degradation experiment of phenol.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.412-417
• /
• 2003

We first investigated basic characteristics of reticulated polyurethane (PU) foams as microbial carriers. In general, the specific surface area of PU foams increases with respect to decreasing pore sizes. However, the number of microbes adhered on the unit surface of reticulated PU foams decreases with respect to decreasing pore sizes. Thus, as a result of totally considering all effects such as apparent density, hydrolysis rate, and adhesion, we can know that PU foams with 45 PPI is the most appropriate microbial carrier. In this study, we can also investigate the effect of various physico-chemical surface treatments on the adhesion of microbes on the surface of PU foams. We used a chitosan treatment, a PEI (Polyethylene Imine) treatment, a xanthane treatment and a plasma treatment. As a result of comparing all surface treatments, the plasma surface treatment was the best.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.547-554
• /
• 2004

The surface characteristics of restoration such as surface roughness and droplet contact angle are important part for the process of bacterial adhesion. The purpose of this study is to compare plaque adhesion by measuring roughness, droplet contact angle, and amount of accumulated plaque on the surfaces of composite resins. Four kinds of composite resins, Z-100(Z1), Durafil(DF), Filtek supreme(FS), Clearfil AP X(CA) were used. Ten samples were divided into unpolished and polished group. Surface roughnesses and droplet contact angles were measured by profilometer and goniometer. Plaque weight gains are measured. The results were as follows: 1. The experimental group were rougher than the control group. Surface roughnesses were decreased in the following order; (Z1, DF, CA)>FS in the control group, and CA>Z1>(FS, DF) in the experimental group(P<0.05). 2 The control group showed larger contact angle than the experimental group. Contact angles were decreased in the following order; CA>(FS, DF, Z1) in the control group, and (CA, DF)>(FS, Z1) in the experimental group(P<0.05). 3. The experimental group showed more much plaque than the control group. The amounts of plaque accumulation in vitro were decreased in the following order; Z1>(DF, FS)>CA in the control group, and Z1>FS>(CA, DF) in the experimental group. The latter showed more much plaque than the former(P<0.05). 4. There were stronger correlation between plaque deposition and contact angle (P<0.05) than that of plaque deposition and surface roughness.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.304-304
• /
• 2015

플라즈마 표면처리를 통해 폴리머의 나노 구조를 형성하는 연구는 활발히 진행되고 있으나, 표면 처리를 통해 나노 기둥 구조를 형성하기 위해 본 연구에서는 폴리머(PMMA, PDMS, PET, NOA) 위에 표면형상 변화를 위한 산소 플라즈마 처리를 하였으며, 이 때 플라즈마 표면처리 공정조건은 파워 및 가스분압별에 대한 조건 변화를 주어 표면처리 후 표면형상 변화를 SEM과 접촉각을 통해 조사하였다. 이를 통해 얻어진 표면형상에서 PMMA의 나노 기둥 구조를 이용하여 건식접착패치에 응용할 수 있을 것으로 기대된다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.4
• /
• pp.241-250
• /
• 1997

The velocity dispersion of surface acoustical wave(SAW) of Si layer/mesh Au/Si substrate was measured by the frequency analysis technique of backward radiation at liquid/solid interface. The difference of backward radiation patterns depending on used transducers (2, 5, 10MHz) confirmed that the backward radiation phenomenon was caused by the energy radiation from SAW generated in surface region. An ultrasonic goniometer was constructed to measure continuously the angular dependence of backscattered intensity. The angular dependences of backward radiation(5MHz) were measured for Ni layer/Al substrate specimens that were bonded by epoxy involving different content of Cu powder. It was known that the width and pattern of backward radiation had informations such as the velocity dispersion, bonding quality and structure of surface region.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.22-27
• /
• 1993

산업기술의 발달에 따라 각 분야마다 정밀한 부품을 요구하고 있다. 이는 이들 부품이 시스템의 성능에 영향을 미치고 있기 때문이다. 부품의 정도는 길이정도와 표면의 정도를 모두 의미한다. 길이정도는 부품의 상대적 크기정도를, 표면정도는 3차원 형상정도를 나타낸다. 이들 부품의 정도를 평가하기 위해서는 반드시 측정이라는 방법이 수행되어야 하며, 측정은 요구되는 측정정도에 따라 이에 상용되는 방법으로 행해지게 된다. 요구되는 측정정도는 시간이 지남에 따라 점차 증가되고 있다. 이 러한 경향은 그림1의 시대에 따른 측정정도를 보면 확인할 수 있다. 시대에 따라 측정정도는 급격히 증가하고 있고 현재의 측정은 초정밀측정이라 말하는 약 0.1nm의 정밀도를 갖고 있다. 측정정도에 따라 표면측정기술도 여러가지 방법이 행해지고 있는데 이들 측정방법은 크게 접촉식 측정방법과 비접촉 측정 방법으로 나눌 수 있다. 대표적인 접촉식 측정방법으로는 촉침식 측정방법을 들 수 있다. 이 방법은 다이아몬드 촉침을 표면상에 접촉하여 주사이동하게 하고 이때 표면의 요철에 따른 촉침의 상하운동을 고성능 변위센서를 이용하여 표면형상을 측정하는 것이다. 이는1nm의 수직분해능을 갖고 측정이 가능 하다. 이 방법은 표면에 접촉함으로 인해 신뢰성이 높지만, 표면의 접촉압력으로 인해 표면의 손상 우려가 있다. 이런 이유로 현재 비접촉 측정방법이 주목받고 있다. 표면측정을 실현하는 데에는 광학 기술이 적극적으로 활용되고 있으며, 최근에는 물리학의 원리들이 도입되고 있다. 본 글에서는 이러한 측정기술의 기본원리를 소개하고 각 기술이 응용되는 예를 소개하고자 한다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.339-347
• /
• 2012

In previous studies, methods for enhancing cellular response on the Hydroxyapatite coated implant surface were described. In this study, the changes of surface characteristics such as surface roughness, contact angle, surface energy and surface morphology were observed when Hydroxyapatite coated Ti discs were immersed in NaCl solution for various time. Hydroxyapatite coated Ti discs were immersed in 0.9% NaCl solution for 7, 14 and 21 days at $37^{\circ}C$. The control group comprises dry identical discs not immersed in a solution. (n=3) All discs were dried in air completely and the surface roughness was measured using confocal laser scanning microscopy(CLSM). Static contact angle was recorded by video contact angle analyzer after dropping distilled water on the surface. The surface energy was calculated from contact angles of the three liquids. Surface was observed using a field emission-scanning electron microscope(FE-SEM). As a result, the surface roughness of immersed Hydroxyapatite coated Ti discs increased significantly and the contact angle decreased comparing with control group discs. The surface energy of immersed discs increased except for discs immersed for 14 days.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.201-201
• /
• 1999

소수성의 특성을 가지는^g , pp (polypropylene)의 표면을 이온 보조 반응법(IAR)으로 처리하여 친수성으로 개질하였다. 이온빔 보조 반응법은 고에너지 이온빔을 이용한 기존의 표면처리 방식과는 달리 1keV 영역의 에너지를 가진 이온빔을 조사하면서 시료 주위에 반응성 가스를 불어넣어 줌으로써 표면의 성질을 변화시키는 방법이다. 여기서 조사된 수소이온의 에너지는 0.6에서 1.0keV까지 변화시키고 시료의 주변에 불어주는 산소의 양은 0에서 8ml/min으로 변화시켰으며 이온 조사량은 5x1014에서 1x1017ions/$\textrm{cm}^2$까지 변화시켰다. 그 결과 처리하지 않은 시료의 접촉각은 93$^{\circ}$이었으며 이온조사량이 1x1017ions/$\textrm{cm}^2$이고 가속에너지가 1.0keV인 조건에서 수소 이온빔만으로 처리한 시편의 경우 접촉각은 60$^{\circ}$정도 였으나 수소이온보조 반응법으로 처리한 시편의 경우는 $10^{\circ}$이하까지 접촉각이 감소하였음을 알 수 있었다. 이는 표면처리에 따른 표면의 친수성 작용기의 형성을 예상할 수 있으며 그 존잴르 확인하기 위하여 대기중과 물속에서 각각 보관한 시료의 접촉각과 표면에너지를 계산하여보았다. 그 결과 대기중에서 방치한 시편의 경우40$^{\circ}$ 정도로 감소하였으나 증류수에 보관한 시료의 경우는 15$^{\circ}$정도의 변화를 보였다. 물과 Formamide의 접촉각의 측정으로 표면에너지를 계산한 결과 산소분위기에서 수소이온빔으로 처리된 시료는 23dyne/cm에서 64dyne/cm이상까지 변화함을 관찰하였다. 위의 결과들이 표면거칠기에 미치는 영향을 고찰하기 위해 처리되지 않은^g , pp 의 근(root mean square)값은 8.30nm이었고 1kevdpsj지에서 불어준 산소4ml/min이고 이온 조사량이 1x1017ions/$\textrm{cm}^2$인 경우 접촉각은 $10^{\circ}$를 나타냈으며 rms값은 20.8nm를 나타내었다. XPS (X-ray photoelectron spectroscopy) 분석을 통하여 1x1017ions/$\textrm{cm}^2$에서 산소기체를 4ml/min 불어넣어준 후 C-O, C=O, (C=O)-O등의 친수성 작용기가 형성되었음을 확인하였다.^g , pp 의 접착력을 알아보기 위해 유성 페인트를 전도성 고분자위에 후막 처리하였다. 스카치 테이프를 테스트를 통하여 이온 보조 반응법으로 처리된^g , pp 표면이 처리하지 않은 시편에 비하여 접착력 향상되었음을 확인하였다.

• Journal of the Korean Chemical Society
• /
• v.57 no.4
• /
• pp.432-438
• /
• 2013

We report a contact angle goniometer that can be easily assembled and used in high school and general chemistry experiments. It consists of an LED flash, a sample stand, and a camera fixed on an optical bread board, and the sample area is covered to block light from outside with a box with holes on both sides. ImageJ, free image analyzing software and a JAVA plugin (Drop_analysis) were used to determine the contact angle of liquid drop resting on solid surface. The contact angles of various liquids were successfully measured on various surfaces. The solid surface energies have also been determined using the Owen-Wendt method from the contact angles of $H_2O$ and $CH_2I_2$. The results reasonably agree with the previously reported values, showing the surface characteristics and modification as well as the dispersive and polar contributions. These contact angle goniometer and method for determination of the contact angle and surface energy can be applied to observation of various surface properties including wettability, hydrophilicity, and water repelling. Students can learn how the surface properties are related to the intermolecular interactions and gain experience about the equilibrium between the related forces, optics, and mathematical derivations.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.1
• /
• pp.70-75
• /
• 1991

Contact angle measuring device was developed in this laboratory using laser beam projec-tion. The new method allows for rapid and direct determination of stationary, advancing, and receding contact angles on both planar and nonplanar solid surfaces, including fibers with very small diameters. A narrow laser beam impinges on an edge of an interface of liquid and solid. This makes two projected laser beam lines upon and radiating from the center of a protractor scale on a tangent screen. Contact angle is measured by determining the difference in angle on the protractor scale between the two projected laser beam lines. Contact angles measured on Perspex-CQ using this instrument were in agreement with the literature. it was shown that this instrument provides a novel method for the facile and accurate measurement of contact angles.