• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.233-241
• /
• 2010

Scaffolding system in the membrane LNG carrier is a steel structure composed of various pipe-shaped members connected by specific coupling devices. In this study, the automatic design program for scaffolding system in membrane LNG carrier has been developed. It enables user to arrange members easily considering design constraints and input variables such as size of tank, position of legs, level height and so on. In addition to that, it creates finite element analysis model with loading and boundary conditions automatically and carries out structural analysis. With post processor based a state-of-the-art computer graphics, users can easily check the results of structural analysis and make a report for structural safety of scaffolding system.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.42-52
• /
• 2017

In this modern world of drastic change, folding architecture was an alternative that offered a novel architectural insight. Today, the folding technique is being used above and beyond architecture, spreading to fashion, lighting, medicine, etc. Especially in the interior space design field, the folding technique is in the limelight as an alternative to create an original space for modern society. However, research and experiments into folding mainly remains at philosophical interpretation or architectural examples, and even these were mostly before the 2000s. Therefore, the present study determined it necessary to look deeply into the post-2000s folding technique focusing on interior space. In this paper, 33 cases of indoor space where folding technique appears are derived, and classified them again by use. The folding technique which was the first step of Sophia Vyzoviti's experiment on her book, "Folding Architecture" was extracted and used as the framework. We summarizes the range of application of folding techniques (interior space in general, floor, wall, ceiling, etc.) and major folding techniques by combining photographs, drawings, and descriptions of the works of the architects. This paper summarizes the characteristics of the space described comprehensively, and draws out the spatial characteristics of the modern interior space where the folding technique appears.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.74-81
• /
• 2007

In this paper, CMOS analog-to-digital converter (ADC) with a 6-bit 1GSPS at 1.8V is described. The architecture of the proposed ADC is based on a folding type ADC using resistive interpolation technique for low power consumption. To reduce the power consumption, a folder reduction technique to decrease the number of folding blocks (NFB) by half of the conventional ones is proposed. further, a novel layout technique is introduced for compact area. With the clock speed of 1GSPS, the ADC achieves an effective resolution bandwidth (ERBW) of 500MHz, while consuming only 60mW of power. The measured INL and DNL were within $\pm$0.5 LSB, $\pm$0.7 LSB, respectively. The measured SNR was 34.1dB, when the Fin=100MHz at Fs=300MHz. The active chip occupies an area of 0.27$mm^2$ in 0.18um CMOS technology.

• Journal of The Korean Association For Science Education
• /
• v.36 no.2
• /
• pp.191-202
• /
• 2016

In this study, a science museum teaching-learning model was developed with emphasis on play. In order to do this, the models of factor-centered museum education and process-centered museum education were reviewed and characteristics of science museum education were considered. The model developed in this study is called 'Play-Learning Model in Science Museum', and 'play' is defined as activities to achieve the mission in accordance with methods and rules set by individuals or small groups including scaffolding and play is divided into competition, simulation, and chance. 'Play-Learning Model in Science Museum' emphasizes learning using the articles on exhibition, scaffolding and interaction in small groups, and play. The model consists of four steps: 'Preparation', 'Exploring the exhibits', 'Experience', and 'Summary of learning content'. In the 'Preparation' step, the students form related knowledge and are ready to play. The 'Exploring the exhibits' step is the core step of this model, and entails the students solving problems in the mission by interacting with members of the small group. When they cannot find resolution, they get help. In the 'Experience' step, hands-on activities related to the prior step are included. In the 'Summary of learning content' step, the students summarize what they learned while playing. As science museum education is implemented in a variety of forms, continuous research about the science museum learning model and development of various programs are needed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.41-49
• /
• 2010

This paper proposes a new high speed SHA-1 architecture using multiple unfolding and pre-computation techniques. We unfolds iterative hash operations to 2 continuos hash stage and reschedules computation timing. Then, the part of critical path is computed at the previous hash operation round and the rest is performed in the present round. These techniques reduce 3 additions to 2 additions on the critical path. It makes the maximum clock frequency of 118 MHz which provides throughput rate of 5.9 Gbps. The proposed architecture shows 26% higher throughput with a 32% smaller hardware size compared to other counterparts. This paper also introduces a analytical model of multiple SHA-1 architecture at the system level that maps a large input data on SHA-1 block in parallel. The model gives us the required number of SHA-1 blocks for a large multimedia data processing that it helps to make decision hardware configuration. The hs fospeed SHA-1 is useful to generate a condensed message and may strengthen the security of mobile communication and internet service.

• Journal of Industrial Convergence
• /
• v.20 no.12
• /
• pp.79-85
• /
• 2022

Recently, a smartphone manufactured on a flexible substrate has been released as an electronic device, and research on a stretchable electronic device is in progress. In this paper, a silicon-based stretchable material is made and used as a substrate to implement and evaluate an optical sensor device using oxide semiconductor. To this end, a substrate that stretches well at room temperature was made using a silicone-based solution rubber, and the elongation of 350% of the material was confirmed, and optical properties such as reflectivity, transmittance, and absorbance were measured. Next, since the surface of these materials is hydrophobic, oxygen-based plasma surface treatment was performed to clean the surface and change the surface to hydrophilicity. After depositing an AZO-based oxide film with vacuum equipment, an Ag electrode was formed using a cotton swab or a metal mast to complete the photosensor. The optoelectronic device analyzed the change in current according to the voltage when light was irradiated and when it was not, and the photocurrent caused by light was observed. In addition, the effect of the optical sensor according to the folding was additionally tested using a bending machine. In the future, we plan to intensively study folding (bending) and stretching optical devices by forming stretchable semiconductor materials and electrodes on stretchable substrates.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.687-690
• /
• 1998

The full Viterbi detector for EPRML read channel system needs large area due to complex computation. There are several conventional methods to reduce the complexity such as GVA(Generalized Viterbi Algorithm) and BMS(Branch Metric Shift). This paper proposes another method, FVD(Folding Viterbi Detector), that has state transition diagram folded with inverted states. Compared with GVA detector, FVD requires only 61% gates and has lower power consumption and better BER performance.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.100-105
• /
• 2001

The manufacturing of metal bellows consists of the four main forming processes, deep-drawing, ironing, tube bulging and folding. Among these, the bulging and folding processes are critically important because the quality of metal bellows is greatly influenced by the forming conditions of these processes. In the present study, the finite element analysis technique is applied to the bulging and folding processes to obtain information about the design parameters of a metal bellows.

• The Science & Technology
• /
• v.30 no.10 s.341
• /
• pp.84-85
• /
• 1997

단백질이 합성된 후 어떻게 고유의 3차 구조를 형성하는가에 대하여 의문을 갖고 15년간 단백질폴딩연구를 계속하고 있는 대전 한국과학기술연구원 생명공학연구소의 책임연구원 유명희박사. 76년 서울대 미생물학과를 졸업한 후 미국에 유학하여 81년 버클리대학에서 박사학위를 받고 귀국한 유박사는 "앞으로 여성후학들이 공동연구로 더욱 좋은 환경 속에서 연구활동을 할 수 있는 분위기 조성을 위해 노력하겠다" 강조한다.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.45-48
• /
• 2001

An programmable current-mode folding and interpolation analog to digital converter (ADC) with programmable interpolator is proposed in this paper. A programmable interpolator is employed not only to vary the resolution of data converter, but also to decrease a power dissipation within the ADC. Because of varying the number of interpolation circuits, resolution is vary from 6 to 10bit. The designed ADC fabricated by a 0.6${\mu}{\textrm}{m}$ n-well CMOS double metal/single poly process. The experimental result shows the power dissipation from 26 to 87mW with a power supply of 3.3V.