• Journal of Chest Surgery
• /
• v.32 no.2
• /
• pp.189-193
• /
• 1999

Mesenchymal cystic hamartoma of the lung is quite rare lesion which has an unknown prevalence, firstly described in 1986. It is characterized by multiple nodules and variable sized cysts in both lung field. The nodules of immature mesenchymal cells gradually enlarge and become cysts which are lined with normal or metaplastic respiratory epithelium and have the cambium layer of primitive mesenchymal cells. Main symptoms are hemoptysis, recurrent pneumothorax, and hemothorax. It is known to benign tumor, but has possibility of malignant degeneration. In gross findings in opertive field, multiple and variable-sized cystic lesions and nodules were observed. The cysts were lined with normal respiratory epithelium and had the cambium layer of primitive mesenchymal cell. Gross and microscopic findings were compatible with mesenchymal cystic hamartoma. We report a case of mesenchymal cystic hamartoma in a 27-year-old woman who had recurrent pneumothorax and hemoptysis.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.5
• /
• pp.61-74
• /
• 2011

This is a fundamental research on use as fill material of lightweight waste such as bottom ash and tire shred. We carried out the test for particle size distribution, specific gravity, density, shear strength, permeability and vertical compression settlement, considering water content change and temperature effect of several waste materials. Bottom ash, which is lighter than soils, has similar permeability and particle size distribution to those of weathered soils. But permeability may differ depending on the particle size distribution. The shear strength aspect of bottom ash and tire shred mixed materials are similar to that of natural fill materials. In the 1-D vertical compression settlement test, we could be assured that bottom ash and tire shred mixed materials showed similar compression settlement to that of sand under actual vertical stress. Furthermore, materials including bottom ash showed smaller compression settlement than that of weathered soils in the long-term settlement test under wetting and freezing-thawing condition.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.2
• /
• pp.195-198
• /
• 1989

The water binding capacity (WBC) of hoe plasma protein was investigated. The centrifugal condition for optimal separation of plasma from hog blood was fixed at 1400 g-force. The WBC of 5%-plasma-protein-solution eel increased rapidly between pH 6 and 7 but gradually after pH 7 at $85^{\circ}C$ for 30 min. The higher heating temperature demonstrated the higher WBC of 5%-plasma-protein-solution gel at pH 7 within short period of time. The WBC of 5%-plasma-protein-solution gel increased rapidly at the beginning of heating. The WBC per gram of plasma protein at pH 7 and $85^{\circ}C$ for 30 min decreased as protein concentration of the plasma solution increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2171-2180
• /
• 1997

In this paper, we proposed a MAC protocol called P/S-DCA that using dynamci channel allocation scheme for supports the multimedia traffic in wireless ATM, and analysis theoretically the throughput and delay of up/down link according to varying the down traffic load. To evaluate and the dynamic channel allocation scheme, simulations are executed with varying down traffic load. The results are proved that system capacity is improved better than PRMA and C-PRAM. The system capacity, denoting by $M_{0.01}$, is defined as the maximum number of conversations which can be supported under constraint of packet dropping probability no more than 1%. It is shown that the values of $M_{0.01}$ for ${\lambda}_{d}=0.5,\;{\lambda}_{d}=0.2\;{\lambda}_{d}=0.1\;{\lambda}_{d}=0.001$ are about 43, 69, 77 and 83, respectively. This indicates that P/S-DCA protocol achieves a significant improvement in system capacity relative to PRMA and C-PRMA protocol.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.93-106
• /
• 2011

In this paper we describe an efficient and easy to use internet stopper, which is called AINS (Automatic Internet Stopper), which uses ARP spoofing scheme. Instead of forwarding packets to router for the case of hacking, in ARP spoofing, the AINS ignores all the packets so that internet stopping operates. The AINS program needs to be installed only in manager computer that does not require additional agent program. In addition to setting manually the stopping computer list, it is able to indentify network nodes automatically by analyzing broadcasting packets. The experimental results show that less than 4 secs for spoofing interval is enough for blocking internet usage regardless the number of computers and therefore network overhead is negligible. The AINS can indentify and control network nodes not only on same subnet but also on different subnet only if they are connected onto same ethernet switch physically. It is being used for an efficient tool for controling internet usage of university computer laboratory and also for an efficient network management.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.236.2-236.2
• /
• 2014

세계 반도체 시장은 컴퓨터 기능이 더해진 모바일 기기의 수요가 증가함에 따라 메모리반도체의 시장규모가 최근 빠른 속도로 증가했다. 특히 모바일 기기에서 저장장치 역할을 하는 비휘발성 반도체인 NAND Flash Memory는 스마트폰 및 태블릿PC 등 휴대용 기기의 수요 증가, SSD (Solid State Drive)를 탑재한 PC의 수요 확대, 서버용 SSD시장의 활성화 등으로 연평균 18.9%의 성장을 보이고 있다. 이러한 경제적인 배경 속에서 NAND Flash 미세공정 기술의 마지막 단계로 여겨지는 1Xnm 공정이 개발되었다. 그러나 1Xnm Flash Memory의 생산은 새로운 제조설비 구축과 차세대 공정 기술의 적용으로 제조비용이 상승하는 단점이 있다. 이에 따라 제조공정기술을 미세화하지 않고 기존의 수평적 셀구조에서 수직적 셀구조로 설계 구조를 다양화하는 기술이 대두되고 있는데 이 중 Flash Memory의 대용량화와 수명 향상을 동시에 추구할 수 있는 3D NAND 기술이 주목을 받게 되면서 공정기술의 변화도 함께 대두되고 있다. 3D NAND 기술은 기존라인에서 전환하는데 드는 비용이 크지 않으며, 노광장비의 중요도가 축소되는 반면, 증착(Chemical Vapor Deposition) 및 식각공정(Etching)의 기술적 난이도와 스텝수가 증가한다. 이 중 V-NAND 3D 기술에서 사용하는 박막증착 공정의 경우 산화막과 질화막을 번갈아 증착하여 30layer 이상을 하나의 챔버 내에서 연속으로 증착한다. 다층막 증착 공정이 비정상적으로 진행되었을 경우, V-NAND Flash Memory를 제조하기 위한 후속공정에 영향을 미쳐 웨이퍼를 폐기해야 하는 손실을 초래할 수 있다. 본 연구에서는 V-NAND 다층막 증착공정 중에 다층막의 두께를 가상 계측하는 알고리즘을 개발하고자 하였다. 증착공정이 진행될수록 박막의 두께는 증가하여 커패시터 관점에서 변화가 생겨 RF 신호의 진폭과 위상의 변화가 생긴다는 점을 착안하여 증착 공정 중 PECVD 장비 RF matcher와 heater에서 RF 신호의 진폭과 위상을 실시간으로 측정하여 데이터를 수집하고, 박막의 두께와의 상관성을 분석하였다. 이 연구 결과를 토대로 V-NAND Flash memory 제조 품질향상 및 웨이퍼 손실 최소화를 실현하여 제조 시스템을 효율적으로 운영할 수 있는 효과를 기대할 수 있다.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.6 s.28
• /
• pp.171-180
• /
• 2005

Public rental housing is constructed, owned, and managed by the public sector. The public institution for the public rental housing controls the whole building life cycle from the construction to the demolition. The construction company for the house built for sale is strongly interested in the cost for the initial investment, while the public institution is more focused on the maintenance cost for the preservation of the buildings Nevertheless, the maintenance cost of the public rental housing has been only managed as the accounting factor without the systemic research and analysis on the actual condition. This paper shows how expenses are related to the degree of obsolescence and presents the differences of the maintenance costs by the housing area and expenditure trends (vs time) of the maintenance costs, through analyzing time series data of public rental housing maintenance cost. Further, this paper helps understanding the causes of the differences of the maintenance costs by housing areas and characteristics of the expenditure trends. After all, this paper contributes to the improvement of the reliability and the practicality for the Life Cycle Cost modeling and the maintenance cost estimating.

• Analytical Science and Technology
• /
• v.23 no.3
• /
• pp.278-283
• /
• 2010

This study was performed to compare the analytical results among L2000DX and two GC/ECD methods (rapid and conventional). 15 samples of transformer oils were collected to compare the analytical results. In the analytical results of PCBs-containing transformer oil, the PCBs concentrations were in the range of 4.4 mg/L to 182.8 mg/L with L2000DX, N.D. to 14.63 mg/L with conventional GC/ECD, and N.D. to 13.03 mg/L using rapid GC/ECD. The PCB concentrations detected with the L2000DX showed a large difference to those detected with GC/ECD methods. Otherwise, little difference was shown between the two GC/ECD methods at a concentration range lower than 4 mg/L, although the rapid GC/ECD method tended to detect a slightly lower concentration near the regulation criteria of Korea for 2 mg/L.

• 한국해양학회지
• /
• v.13 no.2
• /
• pp.26-30
• /
• 1978

This work concerns morphological studies of Alaska pollak, Theragra chalcogramma(PALLAS), and of the Nogari which is generally known as an immature form of the Alaska pollack. Observations are made to see whether significant differences in the meristic and morphometric characters can be recognized between two groups. Four meristic characters, namely, first anal fin rays, first dorsal fin rays, gill rakers, vertebra and three morphometric characters, namely, head length, snout length, eye diameter are chosen for the study. Results of the analyses reveal that the differences in all the selected meristic characters between Nogari and Alaska pollack are found to be not significant. Differences in the snout length in relation to the head length are found to be not significant . However, the differences in the head length in relation to the body length and the differences in eye diameter in relation to the head length are both found to be significant. In spite of the lack of informations on genetypic variations, it is reasonable to state that the Nogari appears to be a juvenile form of the Alaska pollak, and the differences in certain morphometric measurements between two groups are likely to be associated with the differences in the relative growth rates during the life stages.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1000-1005
• /
• 1997

The properties of ceramics by solid-state reaction with hydroxyapatite[$Ca_{10}(PO_4)_6(OH)_2$], which was isolated from tuna bone by wet milling process were investigated. The bulk density $2.93g/cm^3$ at $1350^{\circ}C$ was close to the calculated density $3.21g/cm^3$. On X-ray measurements, the major phases were identified as hydroxyapatite at below $1300^{\circ}C$, but the whitlockite [$Ca_3(PO_4)_2$] phases were appeared due to a decomposition of hydroxyapatite with temperature. The microstructures of sintering specimens were shown as small closed pores between grain boundaries. The mean bending strength of the sintered hydroxyapatite by solid-state reaction is about 58 MPa and this value is higher than that of the articular cartilage maximum strength, 40MPa.