• Journal of the Korean Society of Radiology
• /
• v.2 no.1
• /
• pp.23-29
• /
• 2008

The present study proposed a method that dissolves ultrasonographic images into multiple resolutions using wavelet conversion and a boundary detection filter and improves the quality of ultrasonographic images through boundary detection filtering. In order to reduce noises and strengthen edges, the proposed method adjusted selectivity coefficient by area step by step from a low resolution image obtained from wavelet converted images to a high resolution image and performed edge filtering in consideration of direction. Through this method, we generated a selective low pass filtering effect in areas except edges by decreasing the wavelet coefficient for pixels in spot areas, improved continuity by smoothing edges in the tangential direction, and enhanced contrast by thinning in the normal direction. Through an experiment, we compared the filtering method using a non linear anisotropic expansion model and the filtering method using wavelet contraction structure in single resolution.

• Journal of Ocean Engineering and Technology
• /
• v.4 no.2
• /
• pp.250-250
• /
• 1990

In this paper, fatigue tests were carried out at stress test levels of 461 MPa, 441 MPa, and 431 MPa by using smooth specimen of$2_{1/4}$ Cr-1 Mo steel with the stress ratio(R) of 0.05. The initiation, growth and coalescense process of the major cracks and sub-cracks among the fatigue cracks on the smooth specimen are investigated and measured under each stress level at a constant cycle ratio by the replica technique with optical microscope. Some of the important results are as follows: In spite of the difference of stress levels, the major crack data gather into a small band in the curve of surface crack length and crack depth against cycle ratio N/Nf. The sub-crack data, however, deviate from the band of the major crack. The growth rates, da/dN, of major and sub-crack plotted against the stress intensity factor range, ${\Delta}K$, have the tendency to be compressed on a relatively small band. But it is more effective to predict fatigue life through major cracks. The propagation behavior of surface microcracks on the smooth specimens coincides with that of the specimen having an artificial small surface defect or through crack.

• Journal of the Korean Institute of Gas
• /
• v.12 no.1
• /
• pp.48-53
• /
• 2008

The condensation heat transfer coefficients of R-22 and R-410A in a small diameter tube were investigated. The main components of the refrigerant loop consist of a receiver, a variable-speed pump, a mass flowmeter, an evaporator (preheater), and a condenser (test section). The test section consists of smooth, horizontal copper tube of 3.38 mm outer diameter and 1.77 mm inner diameter. The refrigerant mass fluxes varied from 450 to $1050\;kg/(m^2s)$ and the average inlet and outlet qualities were 0.05 and 0.95. The main results were summarized as follows : the condensation heat transfer coefficient also increases with increasing mass flux and quality. The condensation heat transfer coefficient of R-410A was slightly higher than that of R-22. Most of correlations proposed in the large diameter tube showed significant deviations with experimental data except for the ranges of low quality and low mass flux.

• The Journal of Korean Medicine
• /
• v.28 no.2 s.70
• /
• pp.185-199
• /
• 2007

Objectives : This study was carried out to investigate the inhibitive effect of a combined-herb prescription of Dansam-san (DSS) on formation of foam cells and cytokine. Methods : Experimental formation of foam cells was induced on macrophage RAW 264.7 with ox-LDL. The effect of DSS extract was observed by measuring the changes of CD36, $PPAR-{\Gamma}$, MMP-9, iNOS expression and changes of formation level of foam cells after treating experimentally induced foam cells with DSS extract. Then the antioxidative effect of DSS extract was compared with butylated hydroxyanisole (BHA). Result and Conclusions : Results obtained are as follows: 1. DSS extract showed significant antioxidative effect at 8 mg/ml or more. 2. DSS extract inhibited the formation of foam cells. 3. DSS extract inhibited the creation and revelation of conversion-related material about foam cells. 4. DSS extract prohibited the increase of smooth muscle of vessels.

• The Journal of Korean Medicine
• /
• v.28 no.2 s.70
• /
• pp.54-65
• /
• 2007

Objectives : In the present study, the author investigated whether Naenghyo-hwan(NHH) significantly affect mucin secretion from airway epithelial cells. Methods : Confluent hamster tracheal surface epithelial (HTSE) cells were metabolically radiolabeled with 3H-glucosamine for 24 hrs and chased for 30 min in the presence of NHH to assess the effect of the agent on 3H-mucin secretion. Total elutionprofiles of control spent media and treatment sample through Sepharose CL-4B column were analysed. Effect of NHH on contractility of isolated tracheal smooth muscle was investigated. Also, effect of the agent on MUC5AC gene expression in cultured NCI-H292cells was investigated. Possible cytotoxicities of the agent were assessed by measuring both lactate dehydrogenase (LDH) release from HTSE cells and examining the rate of survival and proliferation of NCI-H292 cells. Results : NHH significantly increased mucin secretion from cultured HTSE cells, with significant cytotoxicity. NHH chiefly affected the 'mucin' secretion. NHH inhibited ACh-induced contraction of isolated tracheal smooth muscle. NHH disturbed both the extraction of total RNA from NCI-H292 cells and polymerase chain reaction, nonspecifically. Therefore, in this experiment, theeffect of NHH on the expression levels of MUC 5AC gene in cultured NCI-H292 cells could not be elucidated. Conclusions : The author suggests that the effect of NHH with their components should be further investigated and it is valuable to find, from oriental medical prescriptions, novel agents which might regulate mucin secretion from airway epithelial cells.

• The Korea Journal of Herbology
• /
• v.30 no.3
• /
• pp.55-61
• /
• 2015

Objectives : This study aimed to investigate the effects of Shingi-whan(SG) on the male reproductive and sexual function, so we measured the spermatogenesis and the testicular toxicity in mice and the vasorelaxation in isolated rabbit corpus cavernosum smooth muscle. Methods : To evaluate effect on the spermatogenesis in mice, we prepared two groups, control group and SG group that was orally administered SG(1,000mg/kg) for 20 days, and compared. To analyze testicular toxicity in mice, we also prepared two groups, doxo group that was injected with doxorubicin (3mg/kg) on three times and doxo + SG group that was injected with doxorubicin and SG for 20 days, and compared. To investigate sexual function of SG in mice, we prepared three groups, normal group and aging elicited group consisting of 18-month-old mice, SG treated aging group that was orally administered SG for 60 days, and compared using histochemical staining on mice corpus cavernous tissues. In order to define the relaxation effects of SG, rabbit corpus cavernous tissues were prepared in $2{\times}2{\times}6mm$ sized strip. Then the dose-dependent relaxation responses of SG at 0.01-3.0 mg/ml in contracted strips induced by phenylephrine were measured. Results : The sperm density in dutus epididymis and the diameter of seminiferous tubules of SG group was significantly increased when compared to control group. The testicular weight and the diameter and height of epithelial layer of seminiferous tubules of doxo + SG group was significantly increased when compared to doxo group. The cavernous strips were significantly relaxed by SG extract In SG treated aging group, ratio of smooth muscles to collagen fibers and red blood cell count in venous sinus was increased as compared to aging elicited group. Conclusions : Our findings have shown that SG extract have effect on spermatogenesis and mitigating effect on doxo-induced testicular toxicity. Further, it also have the vasorelaxant effect on rabbit corpus cavernosum.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.794-801
• /
• 1995

To connect the driver IC and Al coated glass, a method has been developed to plate electrolessly Ni on Al/PR system. It Is necessary to pretreat Al to remove oxide film before plating. In order to find pretreatment process which does not damage photoresist or glass, alkaline and fluoride zincate process have been investigated. Because photoresist and aluminum thin film can easily dissolve in alkaline solution, it is considered that the fluoride zincate process was a suitable one. After immersion in the zincate solution containing 1.5 g/$\ell$ ammonium bifluoride and 100 g/$\ell$ zinc sulfate, electroless nickel plating could be performed. The additive in the zincate solution and thiourea in the plating solution increased smoothness of the plated surface. Acld dip could improve the uniformit of the surface.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.9
• /
• pp.643-650
• /
• 2013

In this paper, we propose a novel method for enhancing the detection speed and rate by reducing the computation in Hough Circle Transform on real-time iris detection of smartphone camera image. First of all, we find a face and eyes from input image to detect iris and normalize the iris region into fixed size to prevent variation of size for iris region according to distance from camera lens. Moreover, we carry out histogram equalization to get regular image in bright and dark illumination from smartphone and calculate minimal iris range that contains iris with the distance between corner of the left eye and corner of the right eye on the image. Subsequently, we can minimize the computation of iris detection by applying Hough Circle Transform on the range including the iris only. The experiment is carried out in two case with bright and dark illumination. Our proposed method represents that detection speed is 40% faster and detection rate is 14% better than existing methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.11
• /
• pp.919-927
• /
• 2013

In this paper, we present a perception-based tone mapping technique using histogram modification for displaying high dynamic range image. HDR (high dynamic range) tone mapping algorithms are used to display HDR image on LDR (low dynamic rnage) devices. Although perception-based tone mapping methods provides better performance, it dose not always produce good results for a wide variety of images. The proposed method reduces dynamic range by using the perception-based tone mapping function and histogram modification. A derivative of perception-based tone mapping function is used as constraint function of histogram and additional compensation process is performed. This method not only improves contrast by adopting different constraints on each pixel value, but also preserves more visual details. In order to prevent over enhancement, histogram modification technique is applied. Furthermore, it can control the rate of image contrast using control parameters. Subjective and objective evaluations show that proposed algorithm is better than existing algorithms.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.140-140
• /
• 2017

4륜 장착 자동차의 토크 전달은 2륜 구동, 4륜 구동 모드를 간단히 전환하는 방식(part time 4WD)과 항시 사륜 구동 모드에서 전후륜의 토크 전달비를 제어하는 방식(AWD, all wheel drive)이 있다. 경제의 발달에 따라서 취미 인구의 확대로 국내에만 180만 명의 R/C car 사용자가 있다. 이 중 2WD-4WD의 전환을 differential lock mechanism으로 구현한 수입산 모델의 가격이 1,000,000원을 호가하지만 가변 제어 방식이 아닌, 정차 후 2-4륜 구동 전환 방식을 적용하고 있으며 상대적으로 내구성이 떨어진다. DC motor의 출력이 늘어나고 배터리의 성능이 좋아진 현재 소형 RC car의 최고 속도는 80 km/h 정도로 빨라졌다. 그러나 마찰 계수가 낮은 노면(실내의 대부분 평활 처리된 복도)에서는 2륜 구동 모드의 활용도가 매우 낮다. 미끄러운 노면에서 후륜 구동 모드로는 oversteer가 발생하여 차량이 스핀하기 쉽고 전륜 구동 모드로는 understeer가 발생하여 제대로 된 코너링이 어렵다. 상시 4륜 구동 모드는 에너지 소모가 크고 전후륜이 tight coupling되어 있는 문제 때문에 일반적인 노면에서 부드러운 코너링이 잘 이루어지지 않는 문제가 있다. 본 연구에서 제안하는 방식은 그림 1와 같이 center shaft의 중간에 영구 자석으로 만들어진 토크 전달용 판이 있고 그 사이에 자계를 차폐할 수 있는 강자성체 셔터를 서보 기구에 연결하여 서보 회전각에 따라서 구동 쪽의 토크가 피구동축으로 전달되는 양을 연속 가변제어할 수 있다. 토크 전달용 판의 차폐 면적에 따른 토크 전달양을 전/후륜 바퀴의 Static torque를 통해 측정하였으며(그림 2), 공중 상태에서 즉 공기저항만을 고려한 상태에서의 RPM 회전수 차이 측정(그림3)을 통해 구동 쪽의 회전수가 피구동축으로 전달되는 양을 측정하여 연속가변 토크 제어 전달 기구의 성능을 확인하였다. 이 기구는 현재 1차적으로는 remote controller의 ch 3(ON/OFF제어 방식)에 연결하여 특정한 양의 토크를 전륜 쪽으로 보낼 수 있도록 구현이 가능하며, ch 2(PID제어 방식)에 연결하여 연속 가변 조절이 가능하도록 구현이 가능하다. 부가적으로 Arduino board를 내장하여 전후륜의 휠센서에서 입력되는 신호를 감지하여 자동적으로 전후륜에 배분되는 토크를 제어할 수 있도록 설계 중에 있다.