• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.5 no.5
• /
• pp.371-376
• /
• 2004

The objective of this study is search to the heat range and velocity of the unibaker oven having multi-level controller by CFD(computational fluid dyamics) analysis. CFD analysis result is expect to find the most suitable place of the heat pipe making thermal equilibrium so that it can be used design data.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.70.2-70.2
• /
• 2010

고순도 금속규소는 반도체, 태양전지 및 규소화 화합물 등의 원료로 사용되어왔으며, 최근 태양전지 시장 확대로 인해 고순도 금속규소의 수요가 증가하고 있다. 그러나 전량 수입 중인 고순도 금속규소의 수급 안정성과 품질 균일성 등이 문제가 되고 있어, 고순도 생산 공정 및 생산 에너지를 절감 공정에 관한 연구 개발이 필요한 실정이다. 이에 본 연구에서는 금속규소의 원료인 규석(SiO2)과 카본(C)의 환원반응을 온도와 압력별로 살펴보고, 평형 상태의 금속규소수율 조건을 알아보았다. 그리고 아크로 내부 위치에 따른 산화/환원 반응식을 고찰하여 주요 반응식의 깁스 자유 에너지를 비교 분석 하였다. 본 해석을 통한 실험용 아크로 제작과 기초실험을 통해 금속 규소 생산 수율 및 순도를 평가하였으며, 생산된 실리콘의 최대 순도는 약 99.8%로 측정되었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.95-100
• /
• 2006

Tolerance analysis method for natural frequencies of multi-body systems having a equilibrium position is suggested in this paper. To perform the tolerance analysis, the Monte-Carlo Method is conventionally employed. However, the Monte-Carlo Method has some weakness; spending too much time for analysis and having a low accuracy and hard to converge in the numerical unstable area. To resolve these problems, a tolerance analysis method is suggested in this paper. Sensitivity equations of natural frequencies are derived at the equilibrium position. By employing the sensitivity information of mass, damping and stiffness matrices, the sensitivity of natural frequencies can be calculated.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2511-2518
• /
• 2002

Dynamic behaviors and stability of an optical disk drive coupled with an automatic ball balancer (ABB) are analyzed by a theoretical approach. The feeding system is modeled a rigid body with six degree-of-freedom. Using Lagrange's equation, we derive the nonlinear equations of motion for a non -autonomous system with respect to the rectangular coordinate. To investigate the dynamic stability of the system in the neighborhood of the equilibrium positions, the monodromy matrix technique is applied to the perturbed equations. On the other hand, time responses are computed by the Runge -Kutta method. We also investigate the effects of the damping coefficient and the position of ABB on the dynamic behaviors of the system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.1 s.118
• /
• pp.65-71
• /
• 2007

Tolerance analysis method for natural frequencies of multi-body systems having a equilibrium position is suggested in this paper. To perform the tolerance analysis, the Monte-Carlo Method is conventionally employed. However, the Monte-Carlo Method has some weakness; spending too much time for analysis and having a low accuracy and hard to converge in the dynamical unstable area. To resolve these problems, a tolerance analysis method is suggested in this paper. Sensitivity equations of natural frequencies are derived at the equilibrium position. By employing the sensitivity information of mass, damping and stiffness matrices, the sensitivity of natural frequencies can be calculated.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.465-470
• /
• 2001

This paper presents an algorithm which seeks steady-state equilibrium positions of constrained multibody systems driven by constant generalized speeds. Since the relative coordinates are employed, the constraint equations at cut joints are incorporated into the formulation. The proposed algorithm leads to nonlinear equations that need to be solved iteratively. This algorithm should satisfy both types of conditions: the force equilibrium equations and the kinematic constraint equations. To verify the effectiveness of the proposed algorithm, two numerical examples are solved and the results are compared with those of a commercial program. This method, compared to the conventional method of using dynamic analysis, has the advantage of computational efficiency and stability.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.2
• /
• pp.90-97
• /
• 2019

Sparkjet actuator, also known as plasma synthetic jet actuator (PSJA), is an active flow control device that has possibility of controling supersonic flow. This actuator utilizes arc plasma to deposit energy onto the gas inside the cavity to raise temperature and pressure. A change in the state of the fluid inside the cavity generates pressure waves and momentum jet, and they are exhausted through out the orifice exit and disturb external flow field. Since the cavity flow is affected by arc plasma, which is an equilibrium plasma and have generated equilibrium flow, the equilibrium state of air should be considered in order to analyze the flow of sparkjet actuator. In this study, numerical program for equilibrium flow was developed for the use of sparkjet actuator analysis. The developed program was validated by comparing the time - accurate jet front positions with the reference result. Then, impulse characteristics of the actuator in the atmospheric quiescent air were explained.

• Economic and Environmental Geology
• /
• v.48 no.2
• /
• pp.131-145
• /
• 2015

Thermodynamic prediction of weathering products from primary aquifer minerals around underground disposal sites was investigated. The distribution of solubility quotients for kaolinite-smectite reactions showed the trend of reaching at equilibrium with Ca-, Mg-, and Na-smectite for deep groundwaters in granitic aquifers. The values of $10^{-14.56}$, $10^{-15.73}$, and $10^{-7.76}$ were proposed as equilibrium constants between kaolinite and Ca-, Mg-, and Na-smectite end members, respectively. On stability diagrams, most of deep groundwaters were located at equilibrium boundaries between stability fields of kaolinite and smectites or on stability fields of smectites and illite. Shallow groundwaters in basic rock aquifer were plotted at the same stability areas of deep granitic groundwaters on stability diagrams. The results indicated that the primiary mineralogical composition may be important to predict weathering products in deep aquifers.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.7 no.2
• /
• pp.19-24
• /
• 2001

The design criteria of ventilating container is not provided yet in Korea. This caused strength reduction due to the ventilating hole and bad ventilating performance. The purposes of this study were to survey the present situation of ventilating container in Korea, to analyze the strength reduction on the atmosphere condition variation, and to provide the criteria for the optimum design of ventilating container. The ventilating area of container was $1.41{\sim}2.65%$, and strength reduction due to the varied pattern, size and location of ventilating hole was $8.5{\sim}20.2%$. The effect on the strength reduction from the pattern and location of ventilating hole was bigger than that from the ventilating area. Equilibrium arrival time of temperature and relative humidity was shorter as the ventilating area was bigger, and temperature reached to the equilibrium state earlier than the relative humidity. There was no significant difference on the ventilating hole pattern between equilibrium arrival time of temperature and relative humidity and equilibrium arrival temperature and relative humidity if the ventilating area was the same.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.101-108
• /
• 2012

Initial shape analysis for cable-stayed bridges should be able to find optimizated initial cable forces and unstrained length that minimize deflection and bending moments of the deck and pylon. Comparison study of an improved initial force method and TCUD method for determination of initial cable forces in cable-stayed bridges is presented in this paper. For this purpose, an elastic catenary cable element and a nonlinear frame element are firstly described. And concepts and algorithm of two analysis methods are then presented. Finally to demonstrate the validity and the accuracy of two methods, numerical examples for initial state problems of cable-stayed bridges are given and compared based on these methods.