Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Tolerance Analysis for Natural Frequencies of Multi-body Systems in Dynamic Equilibrium State

다물체계의 평형위치에서 고유진동수에 대한 공차해석

  • Published : 2007.01.20
Download PDF
⟨ Previous Next ⟩

Abstract

Tolerance analysis method for natural frequencies of multi-body systems having a equilibrium position is suggested in this paper. To perform the tolerance analysis, the Monte-Carlo Method is conventionally employed. However, the Monte-Carlo Method has some weakness; spending too much time for analysis and having a low accuracy and hard to converge in the dynamical unstable area. To resolve these problems, a tolerance analysis method is suggested in this paper. Sensitivity equations of natural frequencies are derived at the equilibrium position. By employing the sensitivity information of mass, damping and stiffness matrices, the sensitivity of natural frequencies can be calculated.

Keywords

References

  1. Haug, E. J., 1989, 'Computer-aided Kinematics and Dynamics of Mechanical Systems' , Vol. 1: Basic Method, ALLYN AND BACON
  2. Choi, D. H., Park, J. H. and Yoo, H. H., 2002, 'Steady-state Equilibrium Analysis of a Multibody System Driven by Constant Generalized Speeds' , KSME International Journal, Vol. 16, No. 10, pp. 1239-1245 https://doi.org/10.1007/BF02983830
  3. Choi, D. H., 2005, 'Statistical Tolerance Aalysis and Modal Analysis of Multibody Systems' , Hanyang University, Ph. D. Thesis
  4. Choi, D. H., Park, J. H. and Yoo, H. H., 2005, 'Modal Analysis of Constrained Multibody Systems Undergoing Rotational Motion' , Journal of Sound and Vibration, Vol. 208, pp, 63-76
  5. Plaut, R. H. and Husseyin, K, 1973, 'Derivatives of Eigenvalues and Eigenvectors in Non-self-adjoint System' , AIAA Journal, Vol. 11, p. 250 https://doi.org/10.2514/3.6740
  6. Rudisill, C. S., 1974, 'Derivatives of Eigenvalues and Eigenvectors of a General Matrix' , AIAA Journal, Vol. 12, p. 721 https://doi.org/10.2514/3.49330
  7. Kim, S. S. and Vanderploeg, M. J., 1986, 'A General and Efficient Method for Dynamic Analysis of Mechanical Systems Using Velocity Transformations' , ASME Journal of Mechanisms, Transmissions and Automation in Design. Vol. 108, pp, 176-182 https://doi.org/10.1115/1.3260799
  8. Bae, D. S. and Haug, E. J., 1987, 'A Recursive Formulation for Constrained Mechanical System Dynamics : Part 1. Open Loop Systems' , Mech. Struct. & Mach., Vol. 15, No. 3, pp. 359-382 https://doi.org/10.1080/08905458708905124