• The korean journal of orthodontics
• /
• v.38 no.6
• /
• pp.427-436
• /
• 2008

Objective: The purpose of this study is to compare landmark position between cephalometric radiography and midsagittal plane projected images from 3 dimensional (3D) CT. Methods: Cephalometric radiographs and CT scans were taken from 20 patients for treatment of mandibular prognathism. After selection of land-marks, CT images were projected to the midsagittal plane and magnified to 110% according to the magnifying power of radiographs. These 2 images were superimposed with frontal and occipital bone. Common coordinate system was established on the base of FH plane. The coordinate value of each landmark was compared by paired t test and mean and standard deviation of difference was calculated. Results: The difference was from $-0.14{\pm}0.65$ to $-2.12{\pm}2.89\;mm$ in X axis, from $0.34{\pm}0.78$ to $-2.36{\pm}2.55\;mm$ ($6.79{\pm}3.04\;mm$) in Y axis. There was no significant difference only 9 in X axis, and 7 in Y axis out of 20 landmarks. This might be caused by error from the difference of head positioning, by masking the subtle end structures, identification error from the superimposition and error from the different definition.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.6
• /
• pp.13-17
• /
• 2020

In the era of the fourth industrial revolution, drones are being used in various civil engineering fields. Currently, the construction and maintenance of slopes are generally managed by manpower. This method has a risk of safety accidents, and it is difficult to accurately evaluate the slope because it is difficult to secure the vision. In this paper, the effects of RTK and GCP on the 3D model of the slope were studied by using digital images taken by the drone. GNSS coordinates were measured for nine points to compare the quality of the slope 3D model, three points of which were used as the check points and the remaining points were used as GCPs. When making the 3D model of the slope using high-accuracy geotagging images using RTK, it was found that the error at the check point decreases as the number of GCP increases. Even if GNSS was used, it was found that the error at the check points of the 3D slope model was not significant when the GCPs were applied. However, it was found that even if high-accuracy geotagging images are used using the RTK module, a significant error occur when the 3D slope model is created without applying GCPs. Therefore, it can be stated that GCP must be applied to create the 3D slope model in which information about the height as well as plane information is important.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.6
• /
• pp.89-99
• /
• 2010

Military Barracks and Bachelor Officer's Quarters are public buildings representing architectural characteristics with repeating the same room modules. These buildings require easy dismantling and reusing for the next generation' military re-organization. For these reasons, since 2005, the modular construction has been applied to military buildings. The most important factors required for modular military buildings are standardization, lowcost construction and reusable construction method. However, conventional modular building system have not been matched with these requirements. This study suggests a new modular system for Bachelor Officer's Quarters using Six-sigma design tool. To reflect the voices of customers, market study and surveys were carried out. Through the QFD, the voices of customers were converted into quality characteristics of building system for BOQ. The various design concepts meeting customer's requirement were derived by the QFD and Pugh matrix methodology. The proposed modular building system shows 80% increased factory production rate and 62% decreased weight of steel frame as compared with the conventional modular building system.

• Koreanishche Zeitschrift fur Deutsche Sprachwissenschaft
• /
• v.1
• /
• pp.313-348
• /
• 1999

이 논문은 독일어의 겹자음회피현상을 설명함에 있어 어휘음운론에서의 분석이 보이는 문제들을 지적하고, 이 문제들이 제약에 바탕을 둔 이론에서는 어떻게 해결될 수 있는가를 보인다. 제약들간의 상호작용에서 특히 중요한 역할을 하는 것이 단일형태실현제약 (Uniform Exponence)으로서, 이 제약을 통해 독일어 동사의 현재시제, 단수, 2인칭 형태와 3인칭형태에서 나타나는 겹자음회피현상이 동사의 어형변화표 (Verbparadigma)와 밀접한 관련이 있음을 알 수 있다. 이는 규칙들을 통해 2인칭과 3인칭의 올바른 형태를 각각 개별적으로 찾아내는 어휘음운론의 분석과는 근본적으로 다르다. 왜냐하면 어휘음운론의 분석에 따를 때, 예를 들어 3인칭 동사 arbeitet에서 Schwa 모음의 삽입은 겹자음회피를 위해 일어난다고 설명되지만 겹자음이 없음에도 불구하고 Schwa 모음이 마찬가지로 삽입되는 2인칭동사 arbeitest는 설명되지 않기 때문이다. 이런 분석에서는 2인칭 형태와 3인칭 형태가 서로 아무런 관련 없이 각기 따로 존재하게된다. 이에 반해 단일형태제약은 이 두개의 형태를 동시에 비교하므로, 동사 굴절형태에서 마치 불필요한 것으로 보이는 모음삽입이나 자음탈락의 원인에 대해 이론적인 근거를 제시할 수 있다. 즉 2인칭 형태와 3인칭 형태는 보다 상위의 제약들이 막지 않는 한 서로 최대한 비슷한 형태를 가지려고 한다. 이 논문은 겹자음 회피를 위한 수단으로서 모음삽입이나 자음탈락은 오로지 이를 통해 동사의 어형변화표가 좋아질 때만 가능하다는 것을 보여줌으로써 규칙이론이 포착하지 못하고 있는 중요한 일반화를 제시하고 있다. 단일형태 실현제약의 중요성은 접두사 in- 과 un- 이 어간과 결합할 때 보이는 대조를 통해서도 확인된다. 여기서도 어휘음운론의 다층어휘부 구조에 의한 설명이 갖는 문제점이 제약들간의 상호작용을 통해 해결될 수 있음을 알 수 있다.VII-1 및 VII-2공의 3600 m 하부층은 건성 가스 생성 단계에까지 도달한 것으로 나타났다. JDZ VII-1, VII-2 시추공의 3500 m 하위 구간의 올리고세 퇴적층에서 유기물 함량 및 수소 지수가 급격히 감소하는 것은 매몰 심도가 깊어지면서 유기물이 열 분해되어 이미 탄화수소를 생성한 것으로 해석된다. JDZ VII-1 및 VII-2 시추공의 가스징후 및 길소나이트 (gilsonite)는 탄화수소가 생성되어 이동한 흔적을 시사한다.을 해석할 수 있음을 보여주는 것으로 평가된다. 다만 PLAYMAKER2가 보다 신뢰할 만한 퇴적환경 해석을 위한 전문가 시스템으로 구축되기 위해서는 향후 많은 퇴적학 전문가들이 추가로 참여하여 기존 규칙들을 재검증하고 새로운 규칙들을 첨가함으로써 보디 세련된 지식베이스를 개발하여야 할 것으로 판단된다.이며 세 개의 산소가 이루는 평면에서 $1.68{\AA}$ 소다라이트내로 이동하여 위치한다. 32개의 $Tl^{+}$ 이온은 결정학적 자리 II에 존재하고 있으며 산소와의 결합거리를 $2.70(1){\AA}$을 유지하면서 큰 동공속으로 $1.48{\AA}$ 이동하여 위치한다. 약 18개의 $Tl^+$ 이온은 결정학적 자리III에, 또 다른 10개의 $Tl^+$ 이온은 결정학적 자리III'에 존재하고 골조 산소와 각각 $2.86(2){\AA},\;2.96(4){\AA}$의 결합거리를 이룬다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.7
• /
• pp.52-60
• /
• 2009

In this pater, a CP-DRA(Circularly Polarized Dielectric Resonator Antenna) using cross-slot-feed is studied to enhance the gain and axial ratio bandwidth. First, a single layer CP-DRA is studied as a reference for comparison. Then a new type of multilayer CP-DRA is proposed to enhance the gain and axial ratio bandwidth. In consideration of the antenna gain enhancement, the spacing between the elements of the multilayer CP-DRA is examined through analysis of the radiation performance of a 2$\times$2 planar amy of DRAs with a spacing of 0.7$\lambda_0$ and 1.2$\lambda_0$ using CST Microwave Studio. The measured result shows that the gain and bandwidth of the multilayer structure is approximately twice that of the single layer one. In the case of the array antenna in which the spacing between multilayer CP-DRA element is 1.2$\lambda_0$, a grating lobe is reduced, in contrast to what we can expect from a conventional antenna array. The gain is 13.4dBi and axial ratio bandwidth is 0.8GHz.

• Journal of the Korean earth science society
• /
• v.28 no.4
• /
• pp.393-404
• /
• 2007

The purpose of this study was to identity scientific models included in the Earth domain of the $10^{th}$ grade science textbooks. Three earth science-related chapters in each of 11 trade books were analyzed. A framework was developed and used to classify a scientific model from three different perspectives: medium of representation, method of representation, and mobility of a model. Results showed that the science textbooks utilized domain-specific models in which the nature of sub-areas of earth science was embedded. That is, the unit of 'Change of the Earth' included many iconic models that represented the inaccessible inner structure of the earth and the movement of the tectonic plates. These were also two-dimensional pictorial and static models. In the chapter of 'Atmosphere and Oceans', symbolic and diagrammatic models were dominant in use, which included weather maps and contour line graphs of sea surface temperature and salinity. The unit of 'Solar System and Galaxies' showed the highly frequent use of iconic and analogical models for the large-scale celestial objects and their movements. Implications for earth science education and relevant research were discussed.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.17-26
• /
• 1998

Ultrasonic sensors are widely used in various applications due to advantages of low cost, simplicity in construction, mechanical robustness, and little environmental restriction in usage. But for the application of object recognition, ultrasonic sensors exhibit several shortcomings of poor directionality which results in low spatial resolution of objects, and specularity which gives frequent erroneous range readings. The time-of-flight(TOF) method generally used for distance measurement can not distinguish small object patterns of plane, corner or edge. To resolve the problem, an increased number of the sensors in the forms of a linear array or 2-dimensional array of the sensors has been used. Also better resolution has been obtained by shifting the array in several steps using mechanical actuators. Also simple patterns are classified based on analyzing signal reflections. In this paper we propose a method of a sensor array system with improved capability in pattern distinction using electronic circuits accompanying the sensor array, and intelligent algorithm based on neuro-fuzzy processing of data fusion. The circuit changes transmitter output voltages of array elements in several steps. A set of different return signals from neighborhood sensors is manipulated to provide enhanced pattern recognition in the aspects of inclination angle, size and shift as well as distance of objects. The results show improved resolution of the measurements for smaller targets.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.3
• /
• pp.214-224
• /
• 2004

A large cage system for the purpose of fishes farming in the open sea was influenced by various forces from the ocean environment. The deformation of the cage by these forces affects the safety of the cage itself, as well as that of the cultivated creatures. In this research, theoretical model was established to analyzing dynamic movement influenced by current for cage. Also, to increase the accuracy of calculations, the reduction ratio of flow speed acquired using the flume tank experiment. Applying the reduction ratio of flow speed to the numerical calculation, the calculation values were compared with the measured values in the flume tank experiment using cage model. The results were as follows ; 1. When the flow speed of the flume tank is fixed, the decrease of the velocity of flow which is passed the upper panel side is proportion to the increase of porosity ratio of netting. 2. When the porosity ratio is fixed, the increase of the velocity of flow which is passed the upper panel side is proportion to the increase of velocity of flow. 3. When the porosity ratio and the flow speed of the flume tank are fixed, the decrease of the velocity of flow which is passed the upper panel side is proportion to the increase of attack angle. 4. As a result of comparison between the underwater shape by simulation which is applying the reduction ratio of flow speed from the experiment using plane netting and that by model experiment, it was found out that the result of the simulation was very close to that of model gear within ${\pm}$ 5 % error range.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.249-254
• /
• 2014

In this paper, minimizing of a parabolic edge planar monopole antenna by scaling method is presented. With the aid of a matching step and discontinuous CPW, the antenna easily adjusts the impedance matching. We used an FR4 dielectric substrate with a dielectric constant of 4.4. The dimensions of the antenna are $26mm{\times}31mm{\times}1.6mm$. A return loss value of more than 10dB was found in the 2.37GHz to 10.52GHz (8.15GHz) range of the antenna fed by the discontinuous CPW. The radiation pattern is about the same as that of the dipole antenna at all frequencies. Configuration elements of the antenna except feed part were reduced into the same rate. So, the size of the antenna was decreased and a broadband property was maintained. Therefore, the self-complementary characteristic of the antenna was confirmed. While satisfying the UWB band, having the smallest size in the antenna miniaturized by scaling;when scale was 0.6. The dimensions of the antenna are $15.6mm{\times}18.6mm{\times}1.6mm$. The return loss was more than 10 dB of the measured result in the range of 3.07GHz to 12.59GHz (9.52GHz).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.113-120
• /
• 2005

3D reconstruction of a scene structure from un-calibrated image sequences has been long one of the central problems in computer vision. For 3D reconstruction in Euclidean space, projective reconstruction, which is classified into the merging method and the factorization, is needed as a preceding step. By calculating all camera projection matrices and structures at the same time, the factorization method suffers less from dia and error accumulation than the merging. However, the factorization is hard to analyze precisely long sequences because it is based on the assumption that all correspondences must remain in all views from the first frame to the last. This paper presents a new projective reconstruction method for recovery of 3D structure over long sequences. We break a full sequence into sub-sequences based on a quantitative measure considering the number of matching points between frames, the homography error, and the distribution of matching points on the frame. All of the projective reconstructions of sub-sequences are registered into the same coordinate frame for a complete description of the scene. no experimental results showed that the proposed method can recover more precise 3D structure than the merging method.