• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.63-71
• /
• 2011

The remote-sensng campaign was performed at the Pohang Accelerator Laboratory where is located in a basin 6km inland from Yeongil Bay. The campaign aimed uncertainty assessment of Remtech PA0 SODAR through a mutual comparison with WindCube LIDAR, the remote-sensing equipment for wind resource assessment. The joint observation was carried out by changing the setup for measurement heights three times over two months. The LIDAR measurement was assumed as the reference and the uncertainty of SODAR measurement was quantitatively assessed. Compared with LIDAR, the data availability of SODAR was about half. The wind speed measurement was fitted to a slope of 0.94 and $R^2$ of 0.79 to the LIDAR measurement. However, the relative standard deviation was about 17% under 150m above ground level. Therefore, the Remtech PA0 SODAR is judged to be unsuitable for the evaluation of wind resource assessment and wind turbine performance test, which require accuracy of measurement.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.98-106
• /
• 2019

As lithium batteries have been used for car navigation systems and as the second battery for black boxes, lithium battery-related car fires have often occurred. In the case a lithium battery is the fire origin, a fire investigation technique has not been established to determine if a battery ignites or whether the lithium battery is damaged by fire. This study introduced car fire cases related to lithium batteries, analyzed the causes of a fire of a lithium battery, and proposed fire investigation techniques to objectively determine if a lithium battery ignites or whether a lithium battery is damaged by fire after external ignition.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.1
• /
• pp.1-12
• /
• 2019

This paper proposes a new motion vector smoothing and motion compensation method to increase the frame rate of videos. The proposed method reduces false motion vector smoothing by improving the weight with reflecting accuracy to overcome the limitation of the conventional motion vector smoothing using the adaptively weighted vector median. Also, to improve the interpolated image quality of the conventional OBMC(Overlapped Block Motion Compensation), a scheme that divides an original block into 4 sub-blocks and then generates the interpolated frame using the reestimated motion vector for each sub-block is proposed. The simulation results prove that the proposed method can provide much better objective and subjective image quality than the conventional method.

• Korean Journal of Veterinary Research
• /
• v.59 no.2
• /
• pp.101-104
• /
• 2019

This study examined the disinfection conditions (exposure time, 0-30 min; exposure temperature, $4^{\circ}C-65^{\circ}C$) of hypochlorous acid water (HOCl) in automobile disinfection equipment. The study tested poliovirus type 1 (PV1), low pathogenic avian influenza virus (AIV, H9N2), and foot and mouth disease virus (FMDV, O type). As a result, the PV1 and FMD viruses were inactivated easily (virus titer 4 log value) by HOCl (> 100 ppm) but the AIV required higher exposure temperatures (> $55^{\circ}C$). In conclusion, the exposure temperature and time are important factors in deactivating AIV and FMDV.

• The Journal of Information Systems
• /
• v.30 no.3
• /
• pp.1-20
• /
• 2021

Purpose Live streaming commerce refers to the fact that people receive live audio and live video directly over the net. While some e-retailers use Live Streaming as a marketing strategy, the impact of live streaming commerce on customers' reuse intentions is unknown. The purpose of this study is to discuss the impact of live streaming commerce by external environmental factors based on S-O-R theory. Design/methodology/approach In this study, we developed a research model based on the S-O-R theory. Using the questionnaire survey method, consumers who used live streaming commerce on Taobao.com were taken as research subjects. Our research model aims to find out how content attributes, real-time interactions, media characteristics, and situational characteristics as stimulus factors influence consumers' perceptions and thus reuse intentions. Findings The results of the analysis show that external environmental factors have a significant impact on consumer perceptions and that perceived risks and flows can influence consumers' reuse intentions. In addition, we also examined the impact of reuse intentions on consumers' active participation. These results show that live streaming commerce can influence consumer perceptions and behavior in several ways.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.78-78
• /
• 2016

다이옥산, 페놀 등의 오염물질 유출로 인한 수질오염사고 발생시 사건 유형에 따라 단수로 인하여 국민들이 불편 겪거나 및 유해물질에 노출되는 등 안전성에 대한 우려가 있다. 본 연구는 수질 오염사고 발생시 댐 추가방류를 통해 위와 같은 문제를 해소하는데 기여하여 단수 등으로 인해 소비자들이 겪을 수 있는 불편을 방지하여 소비자효용의 감소를 줄이고, 안전성측면에서 수자원에 대한 소비자효용을 증가시키는 편익을 추정하고자 한다. 본 연구는 제주도 제외 전국 1,000 가구를 대상으로 한 일대일 개별면접 방식의 설문조사 수행하여 자료를 얻었고, 이 자료를 바탕으로 가구당 WTP의 대푯값을 추정하기 위해 KDI의 CVM 분석지침(2012)을 적용하였다. 수질오염사고 발생시 댐 추가방류에 대한 대푯값 WTP는 2,132.7(원/년/가구)로 추정되었다. 또한 추정결과 상수항 및 제시금액 항의 추정계수는 1.1451(t-값 5.83)와 -0.7286(t-값-5.54)로 모두 유의수준 1%에서 통계적으로 유의하여 설문조사가 제대로 수행되었음을 확인하였다. 국내에는 수질개선과 관련된 다양한 연구들이 존재하지만 댐 추가방류를 통한 수질오염사고 해소 편익 등과 특정사안에 대한 연구들은 존재하고 있지 않다. 따라서 본 연구의 분석결과는 수질 오염 사고로 인한 댐 추가방류의 가치에 대한 선제적인 연구로서 방법론적인 지침과 향후 수자원 개발 및 활용을 위한 정량적인 정보로 활용될 수 있을 것이다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.12
• /
• pp.1-7
• /
• 2020

An experimental evaluation of bending fatigue strength for austempered ductile iron (ADI) spur gears was performed using a Zwick fatigue tester. The gear material was manufactured using vertical continuous casting, resulting in the radius of the graphite grains being smaller. The stress-number of cycles curve (S-N curve) for the bending fatigue strength of the ADI spur gears thus manufactured, without any specific surface treatments, was obtained using post-processing software. It was observed that when the reliability was 50%, the allowable root stress was 610 MPa. was calculated using an analytical method as well as the finite element method, and the difference between the values calculated using the two methods is only 7%. This study provides a reliable basis to rate the reliability design of small gearboxes in automation in the future.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.8
• /
• pp.1-10
• /
• 2021

Gears, which rotate and transmit power by interlocking two cogwheels, were invented in BC. They have been used in various systems, including industrial machinery, transportation devices, and living facilities, through the industrial revolution. Regardless of how they are used, gears are a major source of noise and vibration. Many effective measures are being taken to reduce the radiation noise generated from gears, most commonly by lubrication. Lubrication in gear units reduces friction on interlocking gear surfaces, dampening radioactive noise. This can be very useful for quiet gear design if these lubricating damping effects can be reflected in the analytical phase for gear design. This study experimentally confirms the properties of lubricated and non-lubricated radioactive noise by designing a decelerator gearbox and analyzing the radioactive noise characteristics by torque, rotation, and the number of gears using computer analysis.

• Korea Trade Review
• /
• v.44 no.6
• /
• pp.151-168
• /
• 2019

This study aims to investigate the determinants that can influence customer satisfaction and loyalty. Compared to some of the determinants that have been investigated by other scholars before, this study also includes a new approach to mobile food-ordering that has only appeared within the Chinese fast-food industry in recent years. It is very important to test if the convenience of mobile ordering services can influence customer satisfaction, as more and more customers are using mobile apps to order food, especially in the 4th Industrial Revolution Era. Research data mostly was collected from customers who visited one of five famous Western fast-food restaurants (KFC, McDonald's, Pizza Hut, Subway, and Burger King) in China. The results show that not only price, service quality, food quality, and the physical environment can significantly affect customer satisfaction but also the convenience of mobile ordering services, a new determinant accompanied by the fast development of IoT technology.

• (The)Study of the Eastern Classic
• /
• no.48
• /
• pp.147-167
• /
• 2012

This paper was investigated by comparing "Sok-Mong-Gu Bun-Ju"(續蒙求分註) and "Mong-Gu"(蒙求). As a result, "Mong-Gu" was organized around the person anecdotes, "Sok-Mong-Gu Bun-Ju" is annotated with the person anecdotes. So the text show an differences were found on the configuration. Thus It reveal that "Sok-Mong-Gu Bun-Ju" is a tome and convenient to use the report has been made by scholars can be clarified.