• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.193-204
• /
• 1999

Particle crushing is an important and essential factor in interpreting the strength and deformation properties of granular materials in the case of geotechnical problems related to soil crushability. As a recent field problem, the exploitation of offshore oil reserves in tropical and sub-tropical coastal shelf areas has shown that the behaviour of soils containing carbonates is markedly different from predominantly silica sands. In this study, as a first step in making a mechanical framework of granular materials incorporating the soil crushability, single particle fragmentation tests were carried out on four different types of sands in order to clarify the characteristics of the single particle fragmentation strength as related to soil crushability. The single particle strength was considered with the influence of the particle shapes, the amount of mineral components and the particle sizes. The soil particle strength corresponding $D_{50}$ of soil distribution curve has shown the lower value, the more the carbonate component and the more angular the particle shape.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2003.10a
• /
• pp.236-240
• /
• 2003

• Resources Recycling
• /
• v.12 no.3
• /
• pp.3-12
• /
• 2003

Physical separation containing grinding, sieving, dry magnetic separation and air classification were carried out in order to recover Ta anode from waste Ta condenser. Roll crusher wat used for the liberation of resin and metals in closed circuit system. The liberation between Ta anode and resin was easily achieved, whereat some of metals did not liberated from the Ta anode when the waste condenser was crushed below 8 mesh. When the crushed sample were divided into 8/10 mesh, 10/18 mesh and -18 mesh, metals was mainly remained in 8/10 mesh in contrast to Ta anode was in +18 mesh. It was shown that resin was more easily crushed rather than metals from the result of that resin content was 71.5％ in -18 mesh. The liberation efficiency was different with the input size of the crushed sample and average efficiency was 62.3% due to the locked Ta anode particles. The results of air classification test for the crushed samples showed that optimal air flow are 39㎥/h, 32㎥/h, 20㎥/h. respectively. When the sample were separated with optimal condition, 94.45％ Ta anode containing 97.47 wt.％ Ta anode, 0.93 wt.％ resin. 1.61 wt.％ metal was recovered with 49.39 wt.％ yield.

• Economic and Environmental Geology
• /
• v.57 no.2
• /
• pp.177-184
• /
• 2024

This study was conducted to find a way to reduce the production of cakes generated in the domestic aggregate production process. Cakes from 8 wet aggregate producers were collected and particle size was analyzed. Samples were collected step by step from an aggregate producer A, particle size analysis was performed, and the material balance was calculated before and after an sand recovery unit by modeling the production process. As a result of the particle size analysis of eight cakes, one sample contained 50% sand, and the rest contained about 5% to 25% sand. The results showing that the cake contained a variety of sand in cakes may indicate that the recovery efficiency of the sand recovery units in the field varied. Sieve analysis of the samples showed that the generation of sand particles increased 2.8 times during the third crushing compared to the second crushing, and more cake particles were generated. As a result of simulating the sand recovery unit model, the lower the cut point of the cyclone and dewatering screen, the higher the sand production and the less cake production appeared. In order to reduce the production of cake in the field, it was determined that an optimal operation of the sand recovery unit was necessary in the aggregate production process.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2013

In this study, the characteristics of particle crash of decomposed granite soil sampled at Pocheon area were presented. The degree of weathering was artificially achieved by means of hydrofluoric acid. Weathering index was firstly determined by the analysis of mineral composition. Then, particle distribution, permeability tests were conducted. The results showed that weathering effects on particle crash over entire particle sizes. Comparative analysis on specific surface between $D_{10}$ and $D_{50}$ indicated that the smaller the particle size, the more the particle crash. In addition, the most particle crashing due to compaction appeared around the optimum moisture content. The incremental ratio of specific surface appeared to decrease as weathering proceeds, which means that the higher the weathering index the less the particle crash.

• Tunnel and Underground Space
• /
• v.26 no.2
• /
• pp.120-130
• /
• 2016

Considering the applicability of Kuz-Ram model, which has been used extensively for predicting rock fragmentation size distribution by blasting, to domestic open-pit limestone mine, a total of 21 blasting tests have been executed at an open-pit limestone mine in eastern Gangwon of South Korea. A comparative analysis of field measured value and Kuz-Ram predicted value showed that there are a considerable amount of error in the predicted values regardless of application of various correction parameters for rock factor and uniformity factor; up to 56.45% in mean fragmentation size and 37.52% in uniformity index. Also the problem of applying different correction parameters has been derived even though a similar blasting pattern has been adopted for a same blasting bench. The authors therefore suggest that Kuz-Ram model needs to be modified for a proper application to domestic open-pit limestone mine.

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.10-16
• /
• 2005

In order to recycle the waste concrete from which the reproductive aggregate should be produced in-situ, the applicability of crushers and recycled aggregates, and the compliance with the specification have been evaluated comprehensively. As a result of them, the properties of recycled aggregate particles were inferior to the natural one because of the adherent mortars on the recycled one, and the mobile impact crusher and the eccentric-mounted cone and jaw were superior to the others for the graded aggregates. In the case of anti-frost layer, the recycled one was easily controlled since the dry densities, contrary to natural one, were not largely changed with the moisture contents. It was found that the lean concrete base course is not influenced by absorption as cement dust grows larger, and the 7-day compressive strengths of lean concrete were higher than 10 MPa regardless of the crushing type.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.10
• /
• pp.17-28
• /
• 2015

The strict regulations on eco-friendly construction and the significant reduction of natural aggregate resources have raised public concerns on the utilization of recycled aggregates for backfilling a power transmission pipeline trench. In this paper, the particle breakage of concrete-based recycled aggregates and river sand has been experimentally studied during the standard compaction test. The applied compaction energy does not significantly break the river sand particles down, and thus causes no change in the compaction curve, thermal resistivity, and particle gradation characteristics. On the other hand, considerable particle breakage was observed in case of the three recycled aggregates. Such particle breakage leads to enhancing compaction effort, reducing thermal resistivity, and changing particle gradation curve with finer particles that are broken during the first compaction. In addition, particle breakage is more dramatic in lower water contents because pore water may damp down the compaction energy.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.185-191
• /
• 2008

Today, Large and bigger underground construction are increased. In this study, Blating used electronic detonation (OBM Method) and non-electric detonation are carried out. Through comparison with two method, reduction of vibration and noise and efficiency of construction are investigated. As a result of this study, using electronic detonation is shown that it can control lower vibration and noise level, and better HCF, mucfile, advance rate and fragmentation.

• Explosives and Blasting
• /
• v.21 no.1
• /
• pp.49-58
• /
• 2003

현재 발파의 수행은 채석, 채굴 및 지하철과 도로, 건축, 토목공사 등 다양한 분야에 적용되고 있다. 이에 따라 발파특성의 연구와 관련하여 다양한 이론이 도출되고 있고 사용되지만 발파에 의한 공해인 진동 및 소음의 문제가 대두되면서 또한 이들의 취약점을 보완하기 위해 다양한 공법들이 시행되고 개선되어지고 있다. 본 연구에서는 기존의 발파공법과 Air tubes를 이용한 발파공법을 비교하므로 화약의 사용량을 보다 감소시키고, 기존 전색의 길이를 줄이므로 폭약의 투사면적을 증대시켜 진동 및 폭음을 감소시키고 상대적으로 양호한 파쇄입도를 얻고 상부의 대괴를 최소화하는데 목적이 있다. 따라서 발생하는 진동 및 발파폭음을 크게 감소시킬 수 있으므로 기존 노천발파 및 진동, 소음에 민감한 도심지 발파에서 그 이점을 활용하여 보다 안전적이고 경제적인 발파작업을 수행하는데 연구의 목적이 있다.