• Journal of Wetlands Research
• /
• v.23 no.2
• /
• pp.107-115
• /
• 2021

In order to analyze wave propagation, tidal current, and sediment transport in the vicinity of the Gaeya open channel, it was classified into before(CASE1W) and after(CASE2W) installation of various artificial structures, and the calculation results for CASE1W and CASE2W were compared. For wave propagation, the results of incident and reflected waves were derived using the SWAN numerical model, and the tidal current velocity results were derived using the FLOW2DH numerical model for tidal current. The results of the SWAN numerical model and the FLOW2DH numerical model became the input conditions for the SEDTRAN numerical model that predicts sediment transport, and the maximum bed shear stress and suspended sediment concentration distribution near the Gaeya open channel were calculated through the SEDTRAN numerical model. As a result of the calculation of the SWAN numerical model, the wave height of CASE2W was increased by 40~50 % compared to CASE1W because the incident wave was diffracted and superimposed and the reflected wave was generated by about 7 km long northen jetty. As a result of the calculation of the FLOW2DH numerical model, According to the northen breakwater, the northen jetty and Geumrando, CASE2W was calculated 10~30 % faster than CASE1W in the tidal current of the Gaeya open channel. As a result of the calculation of the SEDTRAN numerical model, the section where the maximum bed shear stress is 1.0 N/m² or more and the suspended concentration is 80mg/L or more was widely distributed in the Gaeya open channel from the marine environment by the complex wave field(incident wave, reflected wave and tidal wave) and the installation of various artificial structures. it is believed that a sedimentation phenomenon occurred in the Gaeya open channel.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.280-280
• /
• 2019

복잡한 구조의 인공어초는 그 형상에 따라 다양한 유동의 특성을 나타낸다. 이러한 유동장 분석은 여러 방면에서 다양한 실험적 연구가 수행되었으나, 현실적으로 좁은 측정영역 내에서 접촉식 계측장비의 설치가 불가하고 갇혀진 수로 내에서 발생하는 반사파랑의 영향으로 인하여 사실상 정량적인 결과도출이 어려운게 현실이다. 본 연구에서는 2차원 단면실험수로 내에 별도의 소파장치를 고안하여 단위 시간당 발생하는 반사율을 측정하고 그에 따른 인공어초 인근의 유동장의 양상을 검토하였다. 수리모형실험은 1/50의 실험축척을 적용하였으며, 서해의 조석 1주기를 재현함과 동시에 반사파랑을 최소화하기 위하여 동일한 스펙트럼(브렛슈나이더-Mytuyatu spectrum) 조건에서의 입사파랑을 15번 반복적으로 조파하였다. 실험 시 측정된 반사율은 0.05에 해당하며, PIV(Particle Image Velocimerty)시스템을 활용하여 인공어초 내부의 미세유동장을 측정하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.3
• /
• pp.291-299
• /
• 2008

The present study is to estimate the effects of diffracted wave fields in a harbor and around harborentrance due to random waves, when a navigation channel is dredged in the vicinity of the a harbor entrance. The cross sections of harbor boundary are considered to be partial or full reflection in this study. The numerical simulation has been performed by the boundary element method, which is to discrete segments of pit- and harbor- boundary with the algorism of auto generated elements. The incident wave conditions are specified using discretized forms of the Mitsuyasu's frequency spectrum and directional function. The results of the present numerical simulation agreed well with those of the published experimental data. It is shown that the ratios of wave height reduction are about 20% for the case of fully reflecting boundary, and 10% for the case of partially reflecting boundary by the effect of placing a pit, respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.149-150
• /
• 2013

Recently, various types of perforated breakwaters are being constructed for protecting offshore storm waves. In general, perforated breakwaters have wave chambers with perforated walls at seaside. Purposes of the wave chambers are to reduce wave reflections and maximum wave forces acting on the breakwater. Impact wave forces due to wave breaking can attack to the perforated wall directly, so the effects have to be considered in the design of the perforated wall carefully. Using resonance channels for wave energy dissipation, a new concept perforated breakwater is proposed, which is free from impact loads. Numerical simulation was made for wave reflection characteristics of the breakwater with respect to major design parameters. Numerical analysis was carried out using the Galerkin's FE model based on the linear potential theory considering energy dissipation on the perforated plate. Variations of wave reflection was investigated according to perforated ratios of perforated plate.

• Water for future
• /
• v.26 no.2
• /
• pp.39-48
• /
• 1993

Since major reason of disaster in coastal area is wave action, prediction of wave deformation is one of the most important problems to ocean engineers. Wave deformations are due to physical factors such as shoaling effect, reflection, diffraction, refraction, scattering and radiation etc. Recently, numerical models are widely utilized to calculate wave deformation. In this study, the mild slope equation was used in calculatin gwave deformation which considers diffraction and refraction. In order to slove the governing equation, finite element method is introduced. Even though this method has some difficulties, it is proved to predict the wave deformation accurately even in complicated boundary conditions. To verify the validity of the numerical calculation, experiments were carried out in a model harbour of rectangular shape which has mild slope bottom. The results by F.E.M. are compared with those of both Lee's method and the experiment. The results of these three methods show reasonable agreement.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.3
• /
• pp.230-236
• /
• 2001

The numerical investigations on the wave-screening characteristics of floating breakwaters are presented. The fluid motion is idealized as linearized, two dimensional potential flow. A finite element model is adopted to analyze the performance of floating breakwaters. Numerical experiments are carried out for two type floating breakwater. One is a conventional pontoon type breakwater with rectangular cross-section, and the other is a side float breakwater which consists of two rectangular shaped floats connected to each other by a frame. To improve the performance of the floating breakwaters, especially for long-period wave conditions, numerical experiments are carried out for the cases attaching the thin plates at the bottom of folats in the vertical direction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.183-185
• /
• 2015

반폐쇄해역에서는 해수교환이 어렵고 육상에서 유입부하와 적조 등의 영향을 강하게 받기 때문에 항상 수질과 저질이 악화되기 쉬운 환경에 처해 있어서 이의 개선을 위한 일환으로 해양식물(잘피)의 서식환경을 복원하여 해양정화에 기여하기 위한 친환경적 접근이 필요하다. 다양한 해상환경조건하에서 잘피의 서식은 변화므로 특히, 파랑의 극한 외력여건에 견디는 친환경 잘피 지지구조물 기술개발이 우선되어야 한다. 본 연구는 잘피장 조성의 기반기술로 해양식생 지지용 바이오 블록을 개발하고 특히, 관광지 및 해양클러스터 단지로 대외적으로 알려져 있는 영도해역에서 영도구가 야심차게 준비해오고 있는 해상낚시터 인근해역에 적용할 수 있는 바이오 블록의 현장시범거치를 통해 잘피 등 해양식생을 유도하기 기반을 마련하기 위한 기초연구로 대상구역에서의 파랑해석과 식생 조성 후에 파랑의 반응특성을 수치모델을 통해 분석하고자 하였다. 계산 결과는 대상지역에 적용할 사면 피복재로 바이오 블록의 규격을 결정하는데 반영될 것이며 후속 연구에서 실제블록의 제작과 현장거치를 수행하고자 한다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.3 no.2
• /
• pp.49-59
• /
• 2000

Wave distribution in Jangjeon Harbour is numerically simulated for an optimum design of the harbour facilities. A deep-water design wave is estimated based on stochastic extreme wave analysis of wind data in the vicinity of the harbour, and it is applied to the boundary condition at open sea. Boussinesq wave theory that includes effects of frequency dispersion and nonlinearity is employed for the wave simulation. The porosity and sponge layer are adapted at beach to depict partial reflection and complete absorption of waves, respectively. The design wave for breakwater is computed in global domain with coarse grids and the wave distribution inside of wharf is simulated in local domain with fine grids.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.2
• /
• pp.141-147
• /
• 1995

Various numerical models for predicting wave deformation have been proposed. Among them a time-dependent mild-slope equation based on the line discharges and surface-elevation changes has been widely used in the wave fields with reflective waves. If applying this model to the case of obliquely-incident waves, not only the open-sea boundary but also one of the lateral boundaries should be treated as incident boundaries. In this study, Maruyama and Kajima (1985), Copeland (1985) and Ohnaka and Watanabe (1987)'s method are reviewed and the characteristics of these methods are analyzed using e normalized wave heights, wave angels and phases obtained from the numerical experiments. It is shown that Ohnaka and Watanabe(1987)'s method provides the most adequate driving boundary is the most suitable in e wave field with a general bottom slope.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.1
• /
• pp.51-58
• /
• 2003

The magnitude of evanescent modes in terms of dynamics it investigated in case that the transformation of water waves is predicted by the linear wave theory. For the waves propagating over two steps, the eigenfunction expansion method is used to predict the amplitudes of reflected and transmitted waves by the component of evanescent modes as well as propagating modes. Then. the relative importance of evanescent modes to the propagating modes is investigated. The numerical experiments find that the evanescent modes are pronounced at the relative water depth of k$_1$h$_1$＝0.11$\pi$ and the water depth ratio of h$_2$/h$_1$ close to zero.