• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.661-664
• /
• 2003

Trade-off of sorority and speed always exists in the latest network environment. Recently, developed security processors is improved very performance, and sorority connection algorithms of a lot of part were embodied by hardware. This high speed security processor is essential ingredient in string network security solution equipment development that require very big band width. In this paper, we wish to describe about design and implementation of 10 Giga VPN equipments. In this system, embodied 10 Giga to use Cavium company's Nitrox-II processor, and supports two SP14-2 interface and PCI interface. All of the password algorithm that password algorithm that support is used in common use VPN equipment for compatibility with common use VPN equipment are supported and support SEED algorithm developed in domestic. Designed to support IPsec and SSL protocol, and supports all of In-Line structure that is profitable in high speed transaction and the Look-Aside structure that is profitable in practical use degree of NPU(Network Processor Unit).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.1023-1026
• /
• 2013

The electronic equipment which was exposed to high level pulsed radiation is damaged as Upset, Latchup, and Burnout. Those damages has come from the instantaneous photocurrent from electron-hole pairs generated in itself. Such damages appeared as losses of power in military weapon system or of blackout in aerospace equipment and eventually caused in gross loss of national. In this paper, we have implemented a RDC(Radiation detection and control module) as part of the radiation protection technology of the electronic equipment or devices from the pulsed gamma radiation. The RDC which is composed of pulsed gamma-ray detection sensor, signal processors, and pulse generator is designed to protect the important electronic circuits from the pulse radiation. To verify the functionality of the RDC, LM118s which had damaged by the pulse radiation were tested. The test results showed that the test sample applied with a RDC was worked well in spite of the irradiation of the same pulse radiation. Through the experiments we could confirm that the radiation protection technology implemented with RDC had the functionality of radiation protection to the electronic devices.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.69-74
• /
• 2017

These days as there are a growing vessel volume in the costal area, the marine accidents has being increased. IMO recommend that all vessels have to be equipped with the safety equipments mandatorily for the safety navigation. Almost medium and large size vessels are equipped with the safety navigational equipments, But many small size vessels are not equipped with those ones because of its owner's financial hardship or indifference. So for the safety of small size vessels in the coastal area, the marine accidents such as stranding, sinking, collision, and so on, have to be protected in advance or the occurred accidents has to be treated quickly. In this paper, the safety equipment for small size vessels having these functions has been developed. This equipment can guarantee the safety of small size vessels in defenseless state considerably by displaying these states in seamen's Smart phone or the cheap dedicated terminal and also informing the control center and nearby other vessels of these states.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.12
• /
• pp.297-304
• /
• 2019

The technological advances such as communication, sensor, and artificial intelligence lead smart factory construction. Smart factory aims at efficient process control by utilizing data from the existing automation process and intelligence technology such as machine learning. As a result of constructing smart factory, productivity increases, but costs increase. Therefore, small companies try to make a step-by-step transition from existing process to smart factory. In this paper, we have proposed a remote control system that support data collection, monitoring, and control for manufacturing equipment to support the construction of CNC cutting machine based small-scale smart factory. We have proposed the structure and design of the proposed system and efficient sensing data transmission scheme. To check the feasibility, the system was implemented for CNC cutting machine and functionality verification was performed. For performance evaluation, the web page access time was measured. The results means that the implemented system is available level.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.506-511
• /
• 2017

LED lighting, which many companies are pursuing commercialization, is a representative green energy technology. However, the LED lighting for broadcasting image should have high output and easy portability compared with general LED lighting devices for street lamps, advertisement or transportation devices. Therefore, while shooting a broadcast image if you use LEDs as a substitute light source for halogen lamps and fluorescent lamps that are large in size and uncomfortable to handle it is expected that the lightening of the equipment will activate the broadcasting image lighting equipment industry. After considering the mass production of the LED module board and the SMT production size of the chip mounter, the board size was determined considering the overall size of the product by model. In this paper, four 20W LED boards are arranged vertically in order to produce an 80W board. In other words, by sharing LED module board size by model, high power LED lighting equipments of 120W and 200W can be selected as an increase in the number of boards.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1675-1683
• /
• 2018

This paper is a study on modeling of an NFC antenna to be inserted into a steel pallet for conveying selected good products through a vision system to a threaded screw from CNC equipment. The CNC equipment used here incorporates the information communication technology (ICT) corresponding to the Internet of Things (IoT), and the smart factory system technology that produces information by exchanging information freely in two directions by connecting the POP corresponding to the service Internet is evolved Equipment. Therefore, it is possible to collect position information on the threaded workpiece by applying NFC antenna designed considering iron pallet used for material management so as to grasp estimated completion time and actual production amount according to production instruction from existing analog type equipment to POP monitoring system And investigated its characteristics.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.300-306
• /
• 2021

Due to the development of IT technology, hardware technologies applied to IoT equipment have recently been developed, so smart systems using low-cost, high-performance RF and computing devices are being developed. However, in the infrastructure environment where a large amount of IoT devices are installed, big data collection causes a load on the collection server due to a bottleneck between the transmitted data. As a result, data transmitted to the data collection server causes packet loss and reduced data throughput. Therefore, there is a need for an efficient big data collection technique in an infrastructure environment where a large amount of IoT devices are installed. Therefore, in this paper, we propose an efficient big data collection technique in an infrastructure environment where a vast amount of IoT devices are installed. As a result of the performance evaluation, the packet loss and data throughput of the proposed technique are completed without loss of the transmitted file. In the future, the system needs to be implemented based on this design.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.469-478
• /
• 2022

This paper contains the results of developing smart devices and applications to monitor the load power of the industrial manufacturing machine and evaluate its performance. The smart devices in this paper are divided into two functionalities, which are collecting load power along with operating environment data of industrial manufacturing machines and transmitting the data to servers. Load power data collected from the smart devices are uploaded to MariaDB inside the Amazon Web Service (AWS) server. Using the RESTFul API, the uploaded power data can be retrieved and shown on the web and mobile application in the form of a graph to provide monitoring capability. To evaluate the performance of the developed system, the response time from MariaDB to web and mobile applications was measured. The results is ranging from 0.0256 to 0.0545 seconds in a 4G (LTE) network environment and from 0.6126 to 1.2978 seconds in a 3G network environment, which is considered a satisfactory result.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1295-1302
• /
• 2021

As the market size of 3D printers increases, the precision of the printout and the speed of operation by the motor are very important issues. In this parer, G-code of each output was generated using a CURA program to compare whether the output of the PLC equipment is the same as that of the Arduino CNC. And after conversion to NC File, a pen was attached to each device to output a result to A4 paper. As a result, the output time was measured to be 1m 39s for PLC equipment and 2m 5s for Arduino CNC. In addition, it was confirmed that the 2D output was equally from the two equipments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.2
• /
• pp.139-147
• /
• 2023

The compact tracking radar system is a pulsed radar tracking system that searches, detects, and tracks targets in real time against aircraft targets with a small RCS(Radar Cross Section) maneuvering at high speed. This paper describes the development of comprehensive performance test equipment to verify the performance of the radar system in a anechoic chamber environment. Describes the design and manufacture of comprehensive performance test equipment to meet requirements, including the generation of simulated target signals to simulate aircraft target signals to verify performance in the laboratory environment of radar systems. It also describes a GUI(Graphic User Interface) program to check performance through a test in conjunction with the tracking radar system. Verify the comprehensive performance test equipment implemented through the performance test.