• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.98-104
• /
• 2009

A solid kick motor is used for propulsion system of KSLV-I 2nd stage. During combustion of the kick motor, vibration and shock could be generated. And it could be transferred to the vehicle equipment bay through the kick motor body. If vibration and shock transferred to the vehicle equipment bay are considerable, electrical equipments could be disordered. Therefore we need to verify influence of vibration and shock caused by combustion of the kick motor. In this research, we measured vibration of the kick motor on the ground firing test. Based on this measurement data, we analyzed random vibration and shock response spectrum.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.128-132
• /
• 2011

We can acquire the criteria of configuration tolerance on the Kick Motor system, KSLV-I upper stage propulsion system from the analysis results of the initial controllability on the KSLV-I upper stage. Also we can assign configuration tolerances on each subsystem from the configuration tolerance on the Kick Motor system. This article deals with the Kick Motor system configuration tolerance criteria and the results of configuration management on the both ground test models and flight test ones.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.203-206
• /
• 2008

Kick motor(KM) for KSLV-I second stage propulsion system is the main hardware that is necessary for launching satellite to it's track. The mass of the kick motor changes with combustion time because the heat insulator is ablated and propellant is used and slag is piled up. We predicted mass change with the flight time using ground combustion data of KM composed of case, propellant, nozzle, ignitor and slag. The mass prediction of kick motor can be used for calculating the two stage mass and center of gravity history.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.180-187
• /
• 2007

Korea Aerospace Research Institute(KARI) is developing Korea Space Launch Vehicle(KSLV). KSLV-I is composed of liquid propulsion system for the first stage and apogee kick motor as the second stage. Kick motor has a high expansion ratio nozzle and its starting altitude is 300km high. To verify the performance of kick motor, high altitude test facility (HATF) to simulate its operating condition is necessary. This paper contains preliminary design for construction of HATF.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.159-165
• /
• 2006

In this study, structural analysis is executed about cone structure of KSL V-1 2nd stage KMS(kick motor support structure) which is designed for support the load developed from 2nd stage kick motor. KMS is consisted of cone structure and truss structure which is designed for supporting load developed from 2nd stage payload. Applied loads to cone structure are tension load by inertia developed from kick motor and compression load developed from kick motor. Also, shear and bending load are developed according to flight condition. In this study, structural analysis of cone structure is executed under several load condition which may be applied to cone structure. Also, structural analysis with two finite element model is performed according to pressure vent scheme. In result of structural analysis, critical load condition is equivalent tension load with cut-out.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.190-200
• /
• 2007

A pyrogen type igniter was designed to satisfy the requirements of KSLV-I Kick Motor system. To insure the reliability of the igniter before the production of the flight model, we have been performed the structure, environmental, combustion tests. The hydraulic test was carried out to confirm the strength of the components of the igniter. The shock and vibration tests were considered to check whether the igniter operates normally under the severe environmental condition. The combustion tests were also performed to understand the ignition characteristics with the variation of initial condition. Finally, we confirmed that the igniter could provide the acceptable energy to ignite the propellant of kick motor at the ground test.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.131-143
• /
• 2008

Slag mass deposition was required to predict performance accurately of KSLV-I kick motor(KM) system. The validation of the numerical analysis was performed with mass flow rate measured at 4th ground test of the KM. The study described here included internal flow field of KM at various time steps during burning. Slag mass accumulation was computed through the aluminum oxide particle paths to deviate from the gas flow streamlines in flight. These numerical analysis was performed with Fluent 6.3 program The effects for the acceleration, origins and diameters of the aluminum oxide particles was analyzed, finally the total slag mass accumulation was acquired. We confirmed that the slag mass deposition was agreement well with predicted slag mass based on kick motor the grounded test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.217-220
• /
• 2008

Slag mass deposition was required to predict accurate performance of kick motor (KM) system. Slag mass accumulation was analyzed through the aluminum oxide particle paths to predict slag mass deposition. Numerical analysis to solve both flow field and droplet accumulation was performed with Fluent 6.3 program. The effects for the acceleration and diameters of the aluminum oxide particles was analyzed, finally total slag mass accumulation was acquired. It confirmed that the slag mass deposition was agreed well with previously slag mass prediction based on KM ground test.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.138-142
• /
• 2010

The thrust axis alignment of the launch vehicle is very important because of the misalignment causes the unstable attitude control and results in mission failure. Generally, optical methods such as digital theodolite and laser tracker and mechanical method such as turn table method are used to align thrust axis to vehicle axis. This article deals with the simple method of thrust axis alignment of Kick Motor.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.705-706
• /
• 2010

The design analysis for the ignition transient combustion characteristics of a Kick Motor igniter indicated that the initial pressure condition would delay ignition time within a range from 100 to 500 ms. In the development tests, we confirmed that the igniter could provide the acceptable energy to ignite the main propellant at ignition transient.