• Journal of Aerospace System Engineering
• /
• v.18 no.4
• /
• pp.53-60
• /
• 2024

We developed a coin cell battery using high-strength carbon fiber and glass fiber, taking a preliminary step toward creating a battery that supports structural loads and stores energy, with potential applications in satellite structures. High-strength fiber-based electrodes and electrolytes were fabricated and applied to coin cells to evaluate their electrochemical performance. Consequently, the discharge capacities under continuous charge/discharge cycles and high discharge rates of 2 C-rate were determined to be 122.9 and 103.5 mAh/g, respectively, indicating that high-strength fibers can replace conventional battery components. Although current performance is lower than that of commercial batteries, this research has demonstrated significant potential as foundational work for multi-functional energy storage devices and is expected to contribute to the development of structural batteries for satellite applications.

• Journal of the Korean Electrochemical Society
• /
• v.21 no.2
• /
• pp.39-46
• /
• 2018

Many studies on the electrochemical performance of Li secondary batteries have been obtained using coin-type cells due to the ease of assembly, low cost and ensuring reproducibility. The coin-type cell consists of a case, a gasket, a spacer disk, and a wave spring. These structural features require a greater amount of liquid electrolyte to assemble than other types of cells such as laminated cells and cylindrical cells. Nevertheless, little research has been conducted on the effect of excess liquid electrolytes on the electrochemical performances of Li secondary batteries. In this study, we investigate the effect of different amounts of electrolyte on the coin-type cells. The amount of electrolytes is adjusted to 30 and $100mg\;mAh^{-1}$. Cycle performances at room temperature ($25^{\circ}C$) and high temperature ($60^{\circ}C$) and high voltage are performed to investigate the electrochemical properties of the different amount of electrolytes. In the case of the unit cell including the electrolyte of $30mg\;mAh^{-1}$, the discharging capacity retention characteristic is excellent in comparison with the case of $100mg\;mAh^{-1}$ under the high temperature and high voltage condition. The former shows a larger increase in internal resistance than the latter, confirming that the amount of electrolyte significantly influences the discharge capacity retention characteristics of the battery.

• Korea Petroleum Association Journal
• /
• no.7 s.17
• /
• pp.74-76
• /
• 1982

텍사코를 제외한 전메이저의 수익은 감소하여 미국계 메이저는 전년대비 총4% 감소했고, BP와 셀은 각각25%, 9%의 수익감소를 기록했다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.275-278
• /
• 2002

본 논문에서는 한국의 전파환경을 도시 계획법에서 지정한 지역세분을 기초로 4개의 대분류와 8개로 소구분하여 Kor-231 모델을 제안하였다. 전파전파 특성을 측정하기 위해 슬라이딩 코릴레이션 기법을 이용한 대역확산 송${\cdot}$수신 방식으로 구현하여 수신전력, 평균 초과지연 그리고 RMS 지연확산을 가장 도시계획적으로 개발된 공업 지역과 주거지역에서 직선 도로에 마이크로셀을 배치하여 도로를 따라 진행하는 LOS와 건물들로 둘러쌓인 N-LOS에서 측정된 데이터를 분석하여 한국의 전파환경에서 잘 적용됨을 확인 하였다.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.65-75
• /
• 2021

Coin cell is a basic testing platform for battery research, discovering new materials and concepts, and contributing to fundamental research on next-generation batteries. Li metal batteries (LMBs) are promising since a high energy density (~500 Wh kg^-1) is deliverable far beyond Li-ion. However, Li dendrite-triggered volume fluctuation and high surface cause severe deterioration of performance. Given that such drawbacks are strongly dependent on the cell parameters and structure, such as the amount of electrolyte, Li thickness, and internal pressure, reliable Li metal coin cell testing is challenging. For the LMB-specialized coin cell testing platform, this study suggests the optimal coin cell structure that secures performance and reproducibility of LMBs under stringent conditions, such as lean electrolyte, high mass loading of NMC cathode, and thinner Li use. By controlling the cathode/anode (C/A) area ratio closer to 1.0, the inactive space was minimized, mitigating the cell degradation. The quantification and imaging of inner cell pressure elucidated that the uniformity of the pressure is a crucial matter to improving performance reliability. The LMB coin cells exhibit better cycling retention and reproducibility under higher (0.6 MPa → 2.13 MPa) and uniform (standard deviation: 0.43 → 0.16) stack pressure through the changes in internal parts and introducing a flexible polymer (PDMS) film.

• Journal of Hydrogen and New Energy
• /
• v.35 no.2
• /
• pp.140-145
• /
• 2024

High temperature co-electrolysis of H₂O-CO₂ mixtures using solid oxide cells has attracted attention as promising CO₂ utilization technology for production of syngas (H₂/CO), feedstock for E-fuel synthesis. For direct supply to E-fuel production such as hydrocarbon and methanol, the outlet gas ratio (H₂/CO/CO₂) of co-electrolysis should be controlled. In this work, current voltage characteristic test and product gas analysis were carried out under various reaction conditions which could attain proper syngas ratio.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.393-397
• /
• 2001

This paper addresses an Intelligent Agent-based Open Architecture Cell Controller for Intelligent Manufacturing System(IMS). With an Intelligent Agent approach, the IMS will be a independent, autonomous, distributed system and achieve a adaptability to change of manufacturing environment. As the development methodology of Open Architecture Cell Controller, an object-oriented modeling technique is employed for building models associated with IMS operation, such as resource model, product model, and control model. Intelligent Agent-based Open Architecture Cell Controller consists of two kinds of dependant agents, that are the active agent and the coordinator agent. The Active agent is contributed to control components of IMS in real-time. The coordinator agent has great role in scheduling and planning of IMS. It communicates with other active agents to get information about status on system and generates the next optimal task through the making-decision logic and dispatch it to other active agent.

• The Science & Technology
• /
• v.32 no.10 s.365
• /
• pp.71-77
• /
• 1999

환경의 세기를 코 앞에 두고 세계는 깨끗한 에너지원 개발에 열을 올리고 있다. 그중에서도 가장 촉망을 받고 있는 연료전지는 온갖 장애를 극복하면서 이제 실용화 단계로 들어섰다. 1999년 3월 17일에는 다임러-크라이슬러사의 쥬르겐 슈렘프회장이 기자들에게 "연료전지자동차 개발경쟁은 끝났다. 이제 우리는 그 비용을 오늘날의 내연엔진수준으로 끌어 내리는 경쟁을 개시했으며 2004년까지 목표를 달성할 것"이라고 말했다. 깨끗하고 조용하며 효과적인 연료전지는 그 응용분야가 자동차만 아니라 셀전화(이동전화)에서 랩탑컴퓨터와 가정용전력공급에 이르기까지 다양하고 폭넓은 범위로 번져 나가 21세기의 우리 생활양식에도 큰 변화를 가져 올 것으로 보인다. 연료전지개발의 현장을 찾는다.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.16-21
• /
• 2016

Silicon/Carbon/CNT composites as anode materials for lithium-ion batteries were synthesized to overcome the large volume change during lithium alloying-de alloying process and low electrical conductivity. Silicon/Carbon/CNT composites were prepared by the fabrication processes including the synthesis of SBA-15, magnesiothermic reduction of SBA-15 to obtain Si/MgO by ball milling, carbonization of phenolic resin with CNT and HCl etching. The prepared Silicon/Carbon/CNT composites were analysed by XRD, SEM, BET and EDS. In this study, the electrochemical effect of CNT content to improve the capacity and cycle performance was investigated by charge/discharge, cycle, cyclic voltammetry and impedance tests. The coin cell using Silicon/Carbon/CNT composite (Si:CNT=93:7 in weight) in the electrolyte of $LiPF_6$ dissolved in organic solvents (EC:DMC:EMC=1:1:1 vol%) has better capacity (1718 mAh/g) than those of other composition coin cells. The cycle performance of coin cell was improved as CNT content was increased. It is found that the coin cell (Si:CNT=89:11 in weight) has best capacity retension (83%) after 2nd cycle.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.10
• /
• pp.999-1004
• /
• 2011

In this paper, calculation method of mutual inductance for two circular coils which are widely used in wireless power transfer system and analysis results using the method are proposed. Two circular coils are arranged in a perpendicular way. For calculation of the mutual inductance, an Rx coil placed perpendicularly with the other coil is uniformly subdivided into many unit cells and both magnetic flux density linked with the Rx coil at each unit cell and the total magnetic flux density of the Rx coil are obtained. Two circular coils are considered as a filamentary coil and uniform current density on each coil is assumed. For verification, helical and spiral coils are fabricated. As a result of measurement in 50 cm to 100 cm distance, theoretical mutual inductance is almost agreed with measured one.