• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.178-192
• /
• 2006

The buffer overflow attack is the single most dominant and lethal form of security exploits as evidenced by recent worm outbreaks such as Code Red and SQL Stammer. In this paper, we propose microarchitectural techniques that can detect and recover from such malicious code attacks. The idea is that the buffer overflow attacks usually exhibit abnormal behaviors in the system. This kind of unusual signs can be easily detected by checking the safety of memory references at runtime, avoiding the potential data or control corruptions made by such attacks. Both the hardware cost and the performance penalty of enforcing the safety guards are negligible. In addition, we propose a more aggressive technique called corruption recovery buffer (CRB), which can further increase the level of security. Combined with the safety guards, the CRB can be used to save suspicious writes made by an attack and can restore the original architecture state before the attack. By performing detailed execution-driven simulations on the programs selected from SPEC CPU2000 benchmark, we evaluate the effectiveness of the proposed microarchitectural techniques. Experimental data shows that enforcing a single safety guard can reduce the number of system failures substantially by protecting the stack against return address corruptions made by the attacks. Furthermore, a small 1KB CRB can nullify additional data corruptions made by stack smashing attacks with only less than 2% performance penalty.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.93-99
• /
• 2008

In this paper, we propose new modulation schemes using the conventional CACB modulation with constant amplitude property. Also the proposed modulation schemes supports high transmission data rate by increasing the spectral efficiency. In order to obtain the high spectral efficiency, the $Q^2$PSK and CA-$Q^2$PSK are used. We explain the simplest combining modulation scheme of CACB and $Q^2$PSK (i.e., CACB-$Q^2$PSK). However, this modulation scheme cannot support the constant amplitude property. Hence the first CACB-CA-$Q^2$PSK (or CACB-CA-$Q^2$PSK I) modulation scheme is proposed for the constant amplitude property. In the modulation scheme, the redundant constant amplitude encoding (spectral efficiency decrease) is required. Therefore, the second CACB-CA-$Q^2$PSK (or CACB-CA-$Q^2$PSK II) modulation scheme is proposed retaining the constant amplitude and the spectral efficiency. Computer simulations show that the proposed CACB-CA-$Q^2$PSK II is the efficient modulation scheme.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.438-449
• /
• 2009

To analyze reception environments of ATSC Digital TV, CIR (Channel Impulse Response) analysis systems are widely applied. The receiving performances of conventional CIR analysis systems are not as good as those of commercial state-of-the-art receivers. There are difficulties in measuring and analyzing reception problems caused by multi-path interferences. To solve these problems, commercial DTV chip sets embedded CIR analysis system is proposed. Generally, commercial chip sets provide baseband (In-phase) channel data and field or segment sync data. For more precise analysis of measured I channel data, it is necessary to extract Q (quadrature) channel data components as well. This paper presents the technical requirements of CIR analysis system for DTV. In order to satisfy such requirements and measure more accurate magnitude and phase of CIR, a method to derive the quadrature data from the measured in-phase channel data is proposed. The proposed channel analysis system is implemented with a commercial DTV chip set and expedites the data analysis for use on DTV field test vehicles. Computer simulation and laboratory test results are provided to demonstrate the performance of the proposed channel analysis system.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.1066-1071
• /
• 2010

To evaluate the effect of horticultural therapy (HT) on the emotional improvement of depressed patients, computer-based heart rate variability (HRV) was compared with self-report scale (SRS) known as existing subjective evaluation method. SRS included four test areas: mental stress scale (MSS), physical stress scale (PSS), Beck anxiety inventory (BAI), and Beck depression inventory (BDI). HRV was itemized into four parameters: standard deviation of the N-N intervals (SDNN), square root of mean squared difference of successive N-N intervals (RMSSD), total power (TP), and low-frequency/high-frequency ratio (LF/HF ratio). Thirty patients with depression at the same mental hospital participated in this study. 15 patients of the treatment group received HT once a week for three months, but the control group did not during the same period. As a result, the emotional improvement in treatment group was clearly identified through HRV as well as SRS. The significant difference was shown at three test areas (MSS, BAI, and BDI, $p$ < 0.001) in SRS and at one parameter (total power, $p$ < 0.05) in HRV. There was noticeable increase in SDNN, RMSSD, and LF/HF ratio in treatment group after HT activity, but no significant difference. Although all parameters of HRV did not show significance, the possibility of HRV as an objective evaluation method to HT was recognized in this study. These results also implied that HT was efficient in the mental and physical regeneration of the depressed patients in both subjective and objective evaluation methods.

• Archives of design research
• /
• v.18 no.1 s.59
• /
• pp.223-232
• /
• 2005

By supply of high performance computer becomes all industries automation and convenient of our life. Can speak that is pursuit of swiftness and variety that is prior most development of information society and production system in competitive industrial design product development process. Specially, students who consumer personality studies design according to variableness must present idea in a short time. Therefore, find a new tool that can show quick modeling result for present of new idea or fast design specifications examination and production at college or corporation now. According to such environment change did request by cost time and cost-cutting until reach in production from product design because competition is gone vigorously. University arrived to think RP induction by result presentation and so on for third dimension model by various design process. This research purpose is going to compare difference methods(Manual processing, CNC machine) with students' design result manufacture process on RP appliance that is using in college. Consequently, think that this study is helpful in the college of which is making use of RP appliance or planning installation. By result of this research, model of big curved line is profitable in hand process, by CNC Is profitable when model is going to manufacture finely, RP work could know that size of product is profitable small thing as is complicated.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1340-1346
• /
• 2005

A water quality modeling study was performed for Chunggye stream during combined sewer overflow(CSO) period, utilizing the diagnostic system for water management in small watershed, CREEK-1(Cyber River for Environment and Economy in Korea). This system integrated geogaphic information system, data base, landscape ecological model(FRAGSTATS), watershed model(SWMM), water quality model (WASP5), and computer graphic. In this study, the watershed model and water quality model were extensively utilized so as to simulate water qualities and flow in Chunggye stream during wet periods. The Chunggye stream watershed was divided into 18 sub-basins in the watershed model and the stream reach into 11 segments in the water quality model. The watershed model was validated against field measurements of BOD, TN, TP, and flow at the downstream location, where the model results showed a reasonable agreement with the field measurements at all parameters. From this study, it was shown that the stream water quality would change along with elapsed time from rainfall start as well as rainfall intensity. The model results indicated that the water quality would significantly upgrade due to the first flush and high sewage ratio of CSO at the beginning of rainfall event, but become degraded along with the runoff increase due to dilution effect.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.84-91
• /
• 2017

This study was performed using Somatom Definition Flash (Siemens, Enlarge, Germany) and GE 64-MDCT (Discovery 750 HD, GE HEALTHCARE, Milwaukee, USA.) using high-density medical materials that (are indispensable to?) computed tomography. We analyzed quantitatively the rate of change of the CT number of the CT reconstruction images by means of the IMAR and MAR algorithms using the phantom images acquired after scanning and previously captured raw data images. As a result, it was shown that the IMAR and MAR algorithms provided if ferent phantom images in the case of all medical high-density materials (p <0.05). The black streak artifacts were analyzed using the MAR and IMAR algorithms to determine if they corresponded to stainless steel materials (p>0.05). Also, it was found that the application of the IMAR algorithm affects the attenuation deviation, because there is a change in the image CT number compared to that before. The results suggest that, in the future, after the implant procedure, it would be useful to observe the surgical site and surrounding tissues during follow-up CT scans.

• Journal of Korea Multimedia Society
• /
• v.15 no.10
• /
• pp.1196-1204
• /
• 2012

In this paper, a series of algorithms are proposed for controlling different kinds of multimedia contents and realizing interact between human and computer by using single input device. Human gesture recognition based on NUI is presented firstly in my paper. Since the image information we get it from camera is not sensitive for further processing, we transform it to YCbCr color space, and then morphological processing algorithm is used to delete unuseful noise. Boundary Energy and depth information is extracted for hand detection. After we receive the image of hand detection, PCA algorithm is used to recognize hand posture, difference image and moment method are used to detect hand centroid and extract trajectory of hand movement. 8 direction codes are defined for quantifying gesture trajectory, so the symbol value will be affirmed. Furthermore, HMM algorithm is used for hand gesture recognition based on the symbol value. According to series of methods we presented, we can control multimedia contents by using human gesture recognition. Through large numbers of experiments, the algorithms we presented have satisfying performance, hand detection rate is up to 94.25%, gesture recognition rate exceed 92.6%, hand posture recognition rate can achieve 85.86%, and face detection rate is up to 89.58%. According to these experiment results, we can control many kinds of multimedia contents on computer effectively, such as video player, MP3, e-book and so on.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.557-562
• /
• 2020

In the non-face-to-face learning environment forced into effect by the COVID-19 pandemic, online learning is being adopted as a major educational technique. Given the lack of research on how online learning patterns affect academic performance, this study focuses on the number and duration of online video learning sessions as a major factor based on midterm and final exams, and with a formative assessment for each type of learning. The correlation of the learning effects was analyzed. The analysis focused on computer programming subjects, which are among the most difficult liberal arts subjects for arts and science students at the university level. The analysis of cases of actual students showed no correlation among weekly formative assessments, the number of learning sessions, and the learning duration. On the other hand, the number of learning sessions (r=.39 p<0.05) and learning duration (r=.42 p<0.05) were correlated with the midterm and final exams. Elements, such as SMS text, bulletin board, and e-mail, were excluded from the analysis because not all students have access to them. Therefore, the results can be improved if future analysis of the students' learning patterns in a non-face-to-face lecture environment is performed considering more factors/elements and the learners' needs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.451-454
• /
• 2000

Invasive methode and Non-invasive methode are used in blood pressure measurement. The Invasive methode can Set the correct measured blood pressure but, it has patient feels uncomfortable. So most of cases use Non-invasive methode. The Oscillometric method is commonly apply to modem electric sphygmomanometer and using various algorithm. In this paper describe about a algorithm it control and to determinate the cuff pressure, and filtering that data for measure the blood pressure. The communicating with personal computer can pressure deflation is by Solenoid valve and it uses RS-232 system in packet communication. The main using algorithm for blood pressure measurements are maximum amplitude algorithm and oscillometric algorithm. MAA(maximum amplitude algorithm) has various measured oscillation it depend on patient's age, height, weight and arm circumference size. In this paper, 1 studied the various measured oscillation apply to characteristic ratio and can get the result of systolic blood pressure, diastolic blood pressure, mean blood pressure. It was not used same ratio to measuring oscillation. In the MAA(maximum amplitude algorithm), we hope for reduce the difference with the real blood pressure and the measured blood pressure, when it applied with various specific ratio.