• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.55-60
• /
• 2006

최근 우리나라는 일반인들의 레저에 대한 관심이 고조되고 있고, 선진국형 해양레저에 대한 관심과 수요가 크게 증가하고 있는 실정이다. 특히, 해양레저의 꽃이라 할 수 있는 세일링요트 및 관련 장비 경우에는 대부분 전량 수입에 의존하고 있어 국산화 개발이 시급히 요구되고 있는 실정이다. 따라서 세일링요트 중에서 넓은 갑판면적 및 안정된 운항성능을 가지는 카타마란형 세일링요트의 선형설계와 형상에 따른 성능/특성 검증 위한 선형시험 등을 수행하여 국내에 적합한 카타마란형 세일링요트의 기초 자료를 정립하여 중소형조선소의 레저선박 관련 기술경쟁력 확보와 해양레저 활성화에 도움을 주고자 한다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.29-34
• /
• 2000

This paper describes a numerical study to make clear the characteristics of flow around a high speed catamaran hull advancing on calm water. The simulation is carried out at Froude number of 0.5 with a separation to length rations of 0.2 to 0.5. To simulate the flows, the Navier-Stokes solver is employed in which the free surface condition is included. Computations are performed in a rectangular grid system based grid system based on the Marker & Cell method. For the validation, the computation results are compared with the experiments.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.2
• /
• pp.36-43
• /
• 1996

An Attitude Control System for a high speed catamaran with contorl fins in waves is designed and investigated by the experimental methods. An optimal control theory is applied to design the automatic attitude control system of the high speed catamaran for its good seaworthiness. The experimental results performed in KRISO model basin for the displacements and accelerations for the model ship are measured in regular hear waves. Form the epxerimental results the effect of control planes is thought to be incroeasing with speed.

• Journal of Navigation and Port Research
• /
• v.33 no.3
• /
• pp.167-174
• /
• 2009

Recently, design technology of has been required such as catamaran yacht with high-speed according to expand a marine leisure industry. The domestic technical development for design and production of yacht is not actively than Canada, USA, Japan etc. However, with further development of yacht design & technology, it is need to develop a key technology related to increase the value of catamaran yacht. In the present paper, new guideline is suggest for catamaran yacht as like kinds of marine leisure ship in order for fundamental structure design and structural analysis for twin-hulled ship yacht and techniques for structural analysis as sea leisure ship in this research. The class of society has not been proposed formally about regulation and methodology for estimation of strength of small hight-speed craft with satisfying two conditions as noted; length less than 50meters, ratio of length to breadth less than 12. In the present study, we were adopted DNV (Yachts, Design Principles, Design Loads, Hull Structural Design) Rule and KR (FRP rule application guide) for scantling of structural members. Furthermore, ABS rule is used for structural calculation about application of loading conditions for catamaran yacht. This study can be available feedback role to manufacture of 38ft diffusion style for catamaran yacht. It is expected that this study will be a good reference in order to design of catamaran yacht with high-speed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.385-386
• /
• 2010

The ship's seakeeping performance in the pitching and roll motion was felt tired. These gives structural loads to loaded with cargo and hull facilities. Be to improve, small catamaran power yacht designed a data for ship research and ship's hull form to be decided. In this study, based on domestic release for coastal marine environment in the interpretation criteria were chosen based on the exercise performance. The seakeeping performance of marine leisure catamaran was based on voyage speed. The seakeeping performance estimates based on the encounter angle, the wave of the encounter frequency response amplitude ratio for exercise was assessed in the high performance area.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.129-130
• /
• 2017

This paper suggests study of basic structure design and structural analysis for the twin car-ferries. The rules and methodology for the analysis of strength of medium and small high speed vessels with a length of more than 50m and a width / ratio of more than 12, such as car-ferries, have not been clarified yet. Therefore, in this paper, the scantling of the members is based on the Korea Classification standards, and the car-ferries standards were additionally applied to verify the structural strength of the design. The results of this study are expected to be useful as basic data related to structural design and structural analysis of high speed twin car-ferries.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.542-550
• /
• 2020

The use of high-strength aluminum alloys for ships and of shore structures has many benefits compared to carbon steels. Recently, high-strength aluminum alloys have been widely used in onshore and of shore industries, and they are widely used for the side shell structures of special-purpose ships. Their use in box girders of bridge structures and in the topside of fixed platforms is also becoming more widespread. Use of aluminum material can reduce fuel consumption by reducing the weight of the composite material through a weight composition ratio of 1/3 compared to carbon steel. The characteristics of the stress strain relationship of an aluminum structure are quite different from those of a steel structure, because of the influence of the welding[process heat affected zone (HAZ). The HAZ of aluminum is much wider than that of steel owing to its higher heat conductivity. In this study, by considering the HAZ generated by metal insert gas (MIG) welding, the buckling and final strength characteristics of an aluminum reinforcing plate against longitudinal compression loads were analyzed. MIG welding reduces both the buckling and ultimate strength, and the energy dissipation rate after initial yielding is high in the range of the HAZ being 15 mm, and then the difference is small when HAZ being 25 mm or more. Therefore, it is important to review and analyze the influence of the HAZ to estimate the structural behavior of the stiffened plate to which the aluminum alloy material is applied.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.2
• /
• pp.127-138
• /
• 1996

The strip method, unified theory and 3-D panel method are commonly used methods for the seakeeping analysis of high-speed vessels. The strip method which is basically 2-dimensional method is known to give incorrect hydrodynamic coefficients and motion responses for the cases of high speed and low frequency region. And the unified theory which uses two dimensional approach in inner domain and slender body theory in outer domain is very complicate in computational modelling. Though the 3-D panel method requires comparatively long computation time, it is believed that the method gives good results without any limitation in ship speed and range of frequency for computation. In the 3-D panel method the source singularity representing translating and pulsating Green function is used and Hoff's method is adopted for the numerical calculation of the Green function. The computation time can be reduced by using the symmetry relationship with respect to longitudinal axis. In this paper the strip method and the 3-D panel method are compared for the seakeeping analysis of a high-speed catamaran. The Compared items are the hydrodynamic coefficients, wave exciting forces, frequency response functions and short-term responses in irregular waves.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.377-384
• /
• 2009

This study was conducted to examine the effects of electrical conductivity (EC) and rootstock on initial growth and physiological response of grafted pepper in protected cultivation. The pepper (Capcicum annuum L.) cultivars 'Nokgwang' was used as scions, and the cultivars used as rootstocks were Capcicum annuum L: 'Kataguruma', 'Conesian hot' and 'Tantan'. The scion cultivar left ungrafted was used as a control. Two experiments were to examine the effects of the EC levels of nutrient solution on the growth and physiological response of grafted pepper, respectively. Nutrient solution was supplied with three level (1.5, 3.0, 5.0dS/m). By the change of nutrient solution EC level, the plant growth of all seedlings decreased with the increase in EC level. grafted seedling was grafted onto rootstock cultivar 'kataguruma' showed higher growth than the other cultivar at the EC 5.0dS/m level. But this result was slightly different by cultivation time (spring and fall). The total N and P concentration were increased with the increase in EC level, but the Ca and Mg concentration were decreased. Photosynthetic rate of ungrafted seedlings decreased at the EC 5.0dS/m level. But there was no difference between EC 1.5 and 3.0dS/m level. Grafted seedlings showed lower photosynthetic rate at the EC 5.0dS/m level. The activity of SOD do not have a uniformly tendency by the EC level. With the EC 5.0dS/m level, the activity of APX attained higher level than the other EC level. Further study will be needed to examine additional cultivation experiment for more variable rootstock, and development of rootstock for salinity tolerance.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.3
• /
• pp.54-71
• /
• 2018

This year marks the 40th anniversary of the first inscription of 12 UNESCO World Heritage sites in 1978. Based on an overview of the implementation of the 'Convention Concerning the Protection of the World Cultural and Natural Heritage', this article examines the current issues of the inscription of cultural heritage over the past 40 years. In particular, this paper focuses on the case study of 'Sacred Island of Okinoshima and Munakata Region' nominated by Japan, which was inscribed on the World Heritage List at the 41st World Heritage Committee in 2017. Also, it demonstrates the recent trend and investigates the issues of imbalances in the evaluation and the decisions among relevant actors in the nomination process of World Heritage. Furthermore, this article attempts to derive feasible implications and lessons, and to generate heritage discourse by examining Japan's management in 'heritage diplomacy' of the World Heritage Convention, which is rapidly changing in the course of its nearly half a century of implementation. In conclusion, the research is expected to provide Korea with strategic guidance marking the 30th anniversary of its entry into the Convention, and to steer the future direction for the inscription and conservation of cultural heritage.