• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.218-222
• /
• 2000

W-Ti film properties for X-ray absorber applications have been investigated with Ti composition have been investigated with Ti composition variation. W-Ti films were deposited by DC magnetron sputtering system. As the working pressure increases, film density decreases and film stress changes from compressive to tensile. The transition pressure (where the film stress in zero) and the stress gradient decrease by adding Ti into W-Ti(6.5 at.%) film shows the smallest stress gradient and transition pressure. It also shows high density ($17.7g/\textrm{cm}^3$) similar to that of pure-W ($17.8g/\textrm{cm}^3$) at the transition pressure. All the films show columnar structure, and its size decreases with increasing Ti composition. Surface roughness and thermal stability are improved by Ti-addition, resulting in a better property for X-ray absorber applications.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.3-11
• /
• 2014

Bottom ash from coal fired power plants is not widely used due to a broad range of particle sizes and a high carbon content for producing geopolymers. The effect of mechanical activation on compressive strength of bottom ash- based geopolymers was examined by rod and planetary-ball milling to encourage full-fledged recycling of bottom ash, the main component of pond ash. The amount of amorphous component in the milled ash samples did not change significantly after the mechanical activation. It is presumably because needle-shaped mullite crystals, which is a major crystalline phase and grown in a glassy matrix, possess high strength and toughness, and therefore, they could endure external shocks and remain almost intact. Milling operation, however, decreased the particle size and improved the homogeneity of ash, thereby leading to increase reactivity of milled ash with alkali activators. Rod milling produced a relatively narrow particle size distribution of the milled ash particles; however, it was less effective in reducing the particle size. Nevertheless, it was interesting to observe that rod milling had equal effect on improving the compressive strength of geopolymers up to about 37%, as that of planetary ball milling. Rod milling is believed to be suitable process for enhancing the reactivity of bottom ash for large-scale recycling of bottom ash and producing geopolymers.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.6-14
• /
• 2011

The re-crystallization process for recovering granular crystalline gypsum from phospho-gypsum have proposed. The process consists of two stages; at the first stage, needle-like fine gypsum is recovered with under-product of 325 mesh wet screening after the speedy hydration of dehydrated phospho-gypsum, and at the second stage, granular crystalline gypsum is recovered with upper-product of 325 mesh wet screening after dehydration and re-crystallization of the needle-like fine gypsum in $Na_2SO_4$ solution. This paper is mainly focused on the influence of dehydration time, cooling speed of temperature and re-crystallization temperature on the recovery of granular crystalline gypsum. And the re-crystallization velocity of needle-like fine gypsum at room temperature and the variation of $Ca^{2+}$ concentration of gypsum slurry during over all re-crystallization process were also discussed.

• Applied Biological Chemistry
• /
• v.6
• /
• pp.37-43
• /
• 1965

8-Hydroxyquinoline, known to have the therapeutic effect to fusarium; and to diminish the amount of evaporation because of reducing the size of the stomata, and a new compound, phenylmercuric 8-oxyquinolinate, were synthesized. The fungicidal effect and diminishing effect of evaporation in phenylmercuric 8-oxyquinolinate were studied and the results are as follows. 1) 8-Hydroxyquinoline(m.p. $74{\sim}75^{\circ}C$, white needle crystalline) was synthesized by Skraup's method, 2) Phenylmercuric 8-oxyquinolinate(m.p. $159{\sim}160^{\circ}C$, yellowish brown needle crystalline) was synthesized by reacting phenylmercuricacetate to 8-hydroxyquinoline. 3) The orders of the fungicidal effects are; a) To Cochliobolus miyabeanus P.M.A.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.4
• /
• pp.221-226
• /
• 1999

Two needle cokes (NC-A and NC-B) that differ in both the texture and impurity content to each other were graphitized at $2000-3000{\circ}C$, and the average particle size, size distribution and surface area were compared after milling. Their anodic properties in Li secondary batteries were also analyzed. Two materials showed a higher degree of graphitization with an increase in the preparation temperature, however, the NC-B series was less graphitized than NC-A due to the presence of impurities and less ordered mosaic texture. The mein particle size of the milled powder was proportional to the degree of graphitization, but the surface area showed the opposite trend. The highly graphitized materials yielded powders of lower uniformity in the size distribution. The discharge capacity of the resulting carbons steadily decreased in the temperature range of 1000 to $2000^{\circ}C$ due to the depletion of carbonaceous interlayers that contain crystal defects. A later increase in the discharge capacity was observed at $>2000^{\circ}C$, which arises from the formation of graphitic interlayers. The milling process gave rise to a sloping discharge curve at >1.0 V, but this was converted to a plateau at <0.25V after a repeated cycling or additional heat-treatment at $1000^{\circ}C$. The discharge at >1.0V likely comes from the disordered surface structure formed during the milling process. The evolution of a plateau at <0.25 V suggests that this disordered structure transforms to a more ordered graphitic one upon a cell cycling or heat-treatment.

• Journal of the Korean Vacuum Society
• /
• v.15 no.6
• /
• pp.612-618
• /
• 2006

Surface modification of PTFE by ion irradiation was performed to improve its surface properties, In the case where argon was used to irradiate the PTFE films, an increase in the adhesion strength was observed when the ion fluence was over $1\times10^{15}\;ions/cm^2$, but the surface morphology dramatically changed to a needle-shaped one. However, when we used hydrogen ions under $O_2$ environmental gas, the adhesion strength increased at an ion fluence of $5\times10^{16}\;ions/cm^2$ and the surface morphology by the hydrogen irradiation was not needle-shaped. The surface morphology and adhesion strength of the hydrogen modified PTFE was influenced by the oxygen flow rate. It was confirmed by reflectance measurements that the surface properties of the hydrogen ion irradiated PTFE were superior to those of the argon ion irradiated PTFE.

• Journal of Korean Clinical Nursing Research
• /
• v.26 no.1
• /
• pp.117-130
• /
• 2020

Purpose: This study aimed to develop a bedside nursing shift report protocol and evaluate the effect of the protocol in a tertiary hospital in South Korea. Methods: The bedside nursing handoff protocol with patient engagement was developed based on the literature review and the validation of an expert group. The effect of the protocol on clinical implication was tested in three medical-surgical units in a tertiary hospital. Outcomes were assessed by patient perception, nurse perception, and reporting time. Data collected from June to August in 2018 and analyzed with descriptive statistics and One-way ANOVA using SPSS version 25.0. Results: The bedside nursing shift report protocol with patient engagement consisted of two steps: nurse to nurse report and bedside report with patients. Nurse's perception with patient engagement was significantly increased after applying protocol (F=17.85, p<.001). Patient's perception was significantly improved in the areas of discharge plan (F=7.86, p<.001), health information privacy (F=4.46, p=.012) and identify attending nurse (F=3.19, p=.042). There were no differences in reporting time between the bedside nursing shift report and a traditional shift report (F=0.61, p=.054). Conclusion: Patient perception was significantly increased, while nurse perception was not different after applying this protocol. For the change in the perception of nurses, education may be preceded to improve nurses' competence for the bedside shift report. Furthermore, the support in enough nurse staffing should be needed for encouraging the bedside shift report. The bedside shift report may enhance patient engagement. Therefore it may improve patient safety and health outcome in clinics.

• Journal of Adhesion and Interface
• /
• v.22 no.4
• /
• pp.118-127
• /
• 2021

In this study, the mechanical properties of vulcanized rubber were evaluated through compounding by controlling filler content to improve the mechanical properties of NBR rubber. Aramid and glass fibers with excellent heat resistance were used as fillers, and ceramics were additionally used in anticipation of a complementary effect, and as for the ceramic materials, needle-shaped and plate-shaped ceramics were used. Each filler was used in an amount of 5.0, 10.0, 15.0, and 20.0 phr in order to investigate the basic properties according to the amount of filler. To confirm the complementary effect through ceramic application, each 10.0 phr fiber and ceramic were mixed with 1:1 ratio to evaluate mechanical properties. As a result, it was confirmed that the decreasing ratio of tensile strength after heat aging was small in the order of aramid fiber, acicular ceramic, glass fiber, and plate ceramic in the case of applying the filler alone. In addition, the mechanical characteristics of vulcanized rubber using composite filler based on fibers and ceramics were evaluated, and it was confirmed that the composite filler had a complementary effect on thermal aging.

• Cross-Cultural Studies
• /
• v.41
• /
• pp.299-320
• /
• 2015

Lewis Carroll's Alice's Adventures in Wonderland expands scope of Children's Literature genre by introducing the discourse of pleasure as opposed to that of didactic discipline. Carroll's narrative is important, not only for children's literature, but also as a forerunner of post/modernism of James Joyce with its language play and linguistic invention. Its treatment of Alice's body change follows the motif of body transformation in myth and literature. Comparing "stasis" of Susan Sontag's character Alice (James) in her play Alice in Bed and "movement" of Carroll's Alice, this study explores the issues of woman's alienation and the dichotomy of mobility/immobility in reality and in their literary representations. Focusing on a female child's double alienation as woman and child, I argue Alice's Adventures in Wonderland is a counter-narrative of alternative bildungsroman. Alice gains her subjectivity through her adventure by power of language and story-telling. Through representation of the dream/adventure of two desiring sisters, Carroll's narrative exhibits subversion of social order and emergence of new order of "chaosmos" out of chaos. As a method of study, this study traces genealogy of "curiosity" in myth and literature as a motivating force that triggers adventure and argues "creative curiosity" is a dynamic energy propelling Alice's adventure.

• Journal of Industrial Convergence
• /
• v.20 no.10
• /
• pp.209-218
• /
• 2022

Individuals often report significant relief from pain and stress even after a single session of massage therapy; however, no previous studies have provided objective evidence supporting the effectiveness of a solitary massage therapy session. In the present study, we aimed to investigate the effectiveness of one-time treatment with a spinal thermal massage device reported to exert the same therapeutic effects as massage therapy in terms of pain reduction and stress relief. A man with chronic low back pain (LBP) underwent two rounds of experiments involving spinal massage treatment and bed rest, respectively. Pain was assessed using a visual analog scale, and heart rate variability (HRV) was measured in real-time to examine autonomic nervous system (ANS) activity. Blood samples were obtained at five points during each round of the experiment to examine changes in cortisol, epinephrine, and norepinephrine. Spinal massage significantly reduced pain and enhanced parasympathetic activity when compared with the bed rest condition. In addition, both epinephrine and norepinephrine levels were lower following spinal massage than following bed rest. These results are consistent with the reported effects of conventional massage therapy and support the effectiveness of one-time treatment using a spinal thermal massage device.