• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.12 no.1
• /
• pp.15-24
• /
• 1994

In order to produce a consistent set of coordinates of the Korea Precise Primary Geodetic Network (PPGN) based on Suwon Datum, PPGN survey with the use of EDM had carried out between 1975 and 1993. In this study, data arrangement and rigorous adjustment was carried out to assess the net strength and local weakness and to evaluate the accuracy of PPGN. ss, specification for PPGN survey would be systematically studied and revised to new technology and field conditions. And basic data for redefinition of official coordinates. of 1st and 2nd triangulation points is obtained.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.1
• /
• pp.27-35
• /
• 1991

The total station which is able to measure angles and distances simultaneously, and G.P.S., 3-dimensional satellite surveying system will be employed as important equipments for establishing and re-adjusting large geodetic networks. The objective of this study is to suggest possibilities of application of combination adjustment by means of studying characteristics of networks adjusted according to detection gross errors included in angles and distances by least square method. It is expected that the results of this study were used for determination of national geodetic networks but also large or small construction site.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.13 no.1
• /
• pp.107-113
• /
• 1995

Generally, the objectives of the geodetic network adjustments are for solving the configuration of geodetic net-works and the problem of observation plans. In this study, assuming that the configuration is fixed, for improving the accuracy of geodetic networks, we focus on choosing adjustment control points and adjustment methods. By choosing adjustment control points and adjustment methods, the adjustment result accuracy of national geodetic networks can be different. So, in this study, we introduce the algorithm that use free network adjustment concept to minimize the displacements of new station points but fixing existing control points. Then, us-ing adjustment results, we can check the errors of existing control points. After checking the errors of existing control point, in case of severe error points in existing control points, we change those points into unknown station points and repeat the algorithm to optimize the coordinates of new station points. As applying this algorithm to simulation network, we can check the errors of existing control points. And changing severe error points into unknown station points, we can decrease the errors of network and optimize the coordinates of new station points. From the results of simulation network adjustment, we think that, as applying this algorithms to sequential adjustment of geodetic network and public surveying that using national geodetic network, the accuracy of network adjustments can be improved.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.7 no.2
• /
• pp.1-6
• /
• 1989

The adjustment of levelling net is being done to the order of nets independently by using the least square method. For the small size net, it has difficulties in verification and statistical analysis of the net since the degree of freedom is low At the same time, it is also difficult to evaluate the error of lower order net correctly. The aim of this study is to analyse the properties of combined adjustment method compared with the independent adjustment method by using the data which have been measured during 1967-1987. Another aim is to analyse the influences of normal orthometric correction and changes of datum. Finally, Korean leveling net has been evaluated by applying real redundancy and variance component estimation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.151-159
• /
• 1993

In conjunction with a vertical network. horizontal geodetic control points provide the basic framework for topographic mapping and legal survey. The design of such networks as well as the technical means for obtaining their coordinates have been changed in time, and therefore Korea National Geographic Institute has planned and observed the precise geodetic network since 1975. The aim of this study is to investigate the systematic distortions of the precise geodetic network in Korea implementing by the simultaneous adjustment. The results show that there are large discrepancies between adjusted and public coordinates in Chun-nam and Kyung-buk areas. The coordinate discrepancies are mainly due to the non-rigorous adjustment method and the disregard of the orientation unknown of the first direction for some blocks.

• Journal of the Korean Geophysical Society
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2003

There are numerous adjustment techniques that deal with the adjustment of geodetic networks but the least squares adjustment is the most common one. During the network adjustment procedure two techniques can be used, the free network adjustment technique and the constrained network adjustment technique. In order to determine the optimum technique for adjusting the geodetic networks, which used for the geodynamical purposes, data from two different geodetic networks "Sinai geodetic network, Egypt, and HGN network, South Korea" had been examined. The used networks had a different configuration and located in different areas with different seismic activity. The results show that both techniques have a high accuracy and no remarkable differences in terms of RMS. On the contrary, the resulted coordinates shows that the constrained network adjustment technique not only cause a remarkable distortion in the station final coordinates but also if the fixed points that define the datum parameters are changed different solutions for the coordinates will be determined. This distortion affect not only in the determination of point displacement but also in the estimation of the deformation parameters, which play a significant role in the geodynamical interpretation of results. Comparing the results which obtained from both techniques with the widely known geodynamical models of the area reviles that the free network adjustment technique results are clearly match with these models, while those obtained from the constrained technique didn’t match at all. By considering the results it seams to be that the free network adjustment technique is the optimum technique, which can be used for the geodetic network adjustment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.5
• /
• pp.451-463
• /
• 2007

This paper describes issues of GPS network adjustment to determine coordinate sets of the $2^{nd}$ order national geodetic control points based on the Korean Geodetic Datum (KGD2002) which has been newly adopted in 2003, After outlining theoretical background of the GPS network processing, the adjustment procedure applied for this project is detailed. Throughout performing a series of minimally constrained adjustments, some outliers have been removed and magnitude of absolute and relative error for a stochastic modeling has been determined as 4mm+0.4ppm and 8mm+0.8ppm in the horizontal and vertical component, respectively. The over constrained adjustment by fixing the $1^{st}$ order control points was performed to derive final solution, indicating that the accuracy of the estimated coordinates was 2cm and 4cm in the horizontal and vertical component.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.6
• /
• pp.587-594
• /
• 2010

This paper describe the optimal design of geodetic network by analytical technique based on the quality criteria of network. We described an example of geodetic network design taking into account the precision, reliability and robustness that are the main criteria of network design. The main goal of this paper is to evaluate the criteria to design the geodetic network coinciding with the criteria of high precision(error ellipse, 2DRMS, CEP), reliability(internal and external reliability) and robustness(maximum shear strain, principal strain, dilatation). The network design parameters computed in this study show that precision and reliability has not much improved by about 2% and 3%, respectively, than the observed network, while robustness has much improved by about 3, 100%. It also shown that maximum errors of precision, reliability and robustness were reduced by 5%, 7% and 16,957%, respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.5 no.1
• /
• pp.66-72
• /
• 1987

It is well known that a triangulateration net is superior to a trilateration net or triangulation net in a same configuration. In general, to explain this nature is not easy because the large residuals and reference variance are revealed in the adjustment of a heterogeneous network. In this paper the precision and the reliability of network are discussed, and the considerations of simultaneous adjustment are covered A practical example shows that the concept and criteria of reliability give better estimate than the precision in heterogeneous network.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.2
• /
• pp.19-27
• /
• 1988

In determining the horizontal positions, economic, speedy, and accurate analytical adjustment methods have studied and developed for a long time. From now on, the adjustment methods using both angles and distances are expected because the development of more precise instruments, E.D.M, and electronic total station provide us with more advantages than the conventional measurement system. The objective of this paper is to study the characteristics of triangulation, trilateration, and combination method due to change of the weight factor of angles, distances, azimuthes, and control point coordinates of combined geodetic network. The results of this study show that combined method is more accurate and effective than other methods in case of combined geodetic network as the other simple networks.