• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.316-325
• /
• 2008

An inductively coupled plasma mass spectrometry (ICP-MS) instrument equipped with flow injection-hydride generation system was used for the determination of trace arsenic in seawater sample. The accuracy in this method was verified by the analysis of certified reference materials (CRM) of seawater (CASS-4, NASS-5). The analytical results agreed with certified value within the range of uncertainty. The expanded uncertainties for CASS-4 and NASS-5 in this experiment were ranged from 6.2% to 6.8% obtained from repeated analyses of the CRMs (n=5). The detection limit of $As^+$ (m/z=74.9216) in this method was confirmed about 0.01 ug/kg. Linearity obtained from calibration curve of arsenic was excellent ($R^2=1$). The detection at $As^+$ (m/z=74.9216) and $AsO^+$ (m/z=90.9165) by using oxygen reaction gas in DRC mode was compared. Sensitivity at $AsO^+$ (m/z=90.9165) was decreased about 25-fold, but the analytical results are the same that at $As^+$ (m/z=74.9216).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.217-225
• /
• 2017

This research represents comparison and validation of static aerodynamic results in different wind tunnel organizations and EFD-CFD results. KAFA conducted wind tunnel tests with Standard Dynamics Model(SDM) which is based on the NRC model, the same configuration of KARI; and then compared and analyzed similarities and differences of the data from KARI and NRC results for verifying the accuracy of wind tunnel tests. Also, We compared the result of CFD with that of wind tunnel tests and examined strakes effect in static characteristics which are attached on the forward fuselage of SDM for investigating the cause of some discrepancies. From this analysis, there are some discrepancies in Cm tendency between EFD-CFD and it did not show the big difference of aerodynamic characteristics by strake effects. Thus, we need to research additionally for analyzing the different cause of some discrepancies such as vortex structures by the rear strut or intake of SDM and regenerating grid resolution of CFD.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.36-43
• /
• 2019

In this paper, a novel channel access scheme for the next-generation vehicle to anything (V2X) system based on IEEE 802.11p standard which is applied to recent connected car technologies is suggested and analyzed. The proposed scheme proposes a channel access method utilizing OFDMA multi-user transmission for IEEE 802.11p based system. In this paper, the authors examine geographical distance and network area performance of IEEE 802.11p system and the proposed scheme. Results of this research show that the proposed scheme is quite suitable for improving conventional V2X standards and systems. This paper also provides mathematical analysis and simulation results of the conventional IEEE 802.11p system and the proposed scheme.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.4
• /
• pp.161-169
• /
• 2009

Republic of Korea is actively adopting IT fusion technologies to achieve the goal of 'Advanced National Defense'. This study is aiming to directly contribute to the ongoing DHRMIS project by analyzing its any discovered and substantial problems as well as suggesting improvements. Current difficulties include the efficient estimation on project cost, the lack of statistics for cross-referencing, the inefficient development methodology, compliance with global quality control standard, and the separated command centers. This study suggests the budget appraisal process prior to the actual execution, the introduce of regulatory business registration system, applying an efficient development methodologies as well as ISO9126 standard for quality control, and a centralized command department. We expect this study would contribute to following researches in advancing our national defense.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.63-67
• /
• 1995

신체 자세균형의 안정도를 반영하는 압력중심(COP)을 계측하기 위해 정삼각형 모양의 평형판 시스템을 설계, 제작하였고 그 유용성을 평가하였다. 재질로는 강도와 가공성이 뛰어난 듀랄루민을 사용하였고 압력중심(COP)의 위치를 계측하는 힘센 서로는 공업용 로드셀 3개를 사용하였다. COP신호를 검출하는 전자회로를 제작하여 실험한 결과 평형판의 COP 위치측정 오차는 2% 미만이었다. 시스템의 임상응용가능성을 평가하기 위하여 정상인 10명과 이학적 평가가 정상인 환자 4명을 대상으로 임상실험을 수행하였다. 자세안정도를 반영할 척도로써 COP신호의 표준편차($SD_x,\;SD_y,\;SD_r$)를 설정하여 자세가 불안정해짐에 따라, 그리고 시각의 영향이 배제됨에 따라 이 값들이 증가하는 것을 관찰하였다. 또한 환자의 경우에는 정상인과 현저한 차이를 보였다. 즉, 본 평형판시스템이 자세안정도를 정량적이고 예민하게 계측할 수 있음을 확인하였고 임상적 실용성을 검증하였다.

• The Korean Journal of Applied Statistics
• /
• v.18 no.3
• /
• pp.597-606
• /
• 2005

The nonresponse in sample survey causes a problem when it comes time to analyze dataset in public-use files where the user has only complete-data methods available and has limited information about the reasons for nonresponse. Recently imputation for nonresponse is becoming a standard approach for handling nonresponse and various imputation methods have been devised . However, most imputation methods concern with continuous traits while many interesting features are measured by binary or ordered categorical scales in sample survey. In this note. an imputation method for ignorable nonresponse in binary or ordered categorical traits is considered.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.57-60
• /
• 2004

본 연구에서는 ETSI 및 3GPP에 의해 개발된 광대역 음성부호화의 표준안인 AMR-WB 알고리즘을 분석하고, TMS320VC5510 DSK를 이용한 실시간 구현 결과를 제시하였다. AMR-WB 음성부호화기의 실시간 구현을 위해 프로그램 최적화 작업을 수행하였고, 구현된 음성 부호화기의 성능을 평가하기 위해서 프로그램 메모리와 데이터 메모리의 크기, 그리고 한 프레임당 수행 시간을 측정하였다. 구현된 시스템의 프로그램 메모리는 약65.6 kbytes, 데이터 메모리는 약 73.8kbytes 정도의 크기를 나타내었으며, 한 프레임인 20 msec를 처리하는데 소요되는 cycle 수가 평균 1,247,115 정도로 약 6.24 msec 내에 처리 할 수 있음을 보였다. 마지막으로 DSP로 구현한 AMR-WB 음성부호화기의 결과가 PC에서 시뮬레이션 한 결과와 일치함을 검증하였고 실시간으로 동작됨을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.971-980
• /
• 1994

The need increased capacity in the cellular system has resulted in the adoption of digital technology with CDMA as the channel access method. It has been recognized that the distinction of the base station is important for its performance in CDMA, since the same spreading sequences are used by the all base stations. Time offset of the pseudo-random noise binary code are used to distinguish signals received at a mobile station from different base station. But the start of the zero offset PN sequence is chosen arbitrary without the background of the systematic and mathematical elaboration. This paper proposes a mothed that define the start of the zero offset PN sequence mathematically. This paper also discusses a method that can easily calculate the time offset of the received spreading sequence with respect to the zero offset PN sequence.

• Journal of Broadcast Engineering
• /
• v.5 no.1
• /
• pp.10-22
• /
• 2000

In this paper, we present a texture description method as a standardization of multimedia contents description. Like color, shape, object and camera motion information, texture is one of very important information in the visual part of international standard (MPEG-7) in multimedia contents description. Current MPEG-7 texture descriptor has been designed to fit human visual system. Many psychophysical experiments give evidence that the brain decomposes the spectra into perceptual channels that are bands in spatial frequency. The MPEG-7 texture description method has employed Radon transform that fits with HVS behavior. By taking average energy and energy deviation of HVS channels, the texture descriptor is generated. To test the performance of current texture descriptor, experiments with MPEG-7 Texture data sets of T1 to T7 are performed. Results show that the current MPEG-7 texture descriptor gives better retrieval rate and fast and fast extraction time for texture feature.

• Horticultural Science & Technology
• /
• v.19 no.2
• /
• pp.179-185
• /
• 2001

Throughout the world, physical and chemical analyses of horticultural substrates are carried out in many different ways at the different laboratories. In Europe, standardization in properties and analytical methods of horticultural substrates has been a topic over the last decades. As a result, the CEN methods as European standard methods for the physical and chemical analyses were introduced and the final draft was reported in 1999 by CEN(Committee for European Standardization). Dry matter and moisture content are analyzed after drying samples at $103^{\circ}C$. Laboratory compacted bulk density is analyzed by determining the weight of sample compacted in the test cylinder with constant volume. Dry bulk density, particle density, total pore space, water volume, air volume and volume shrinkage are determined by saturating, draining and drying the sample using double rings and a sand suction table. pH and EC are analyzed by 1:5(sample:distilled water) extraction method on the basis of volume. Organic matter and ash content are determined after drying and combusting the samples. Now, CEN methods are being regarded almost as European standard methods. Further study needs to be carried out for universal applicability of the CEN methods to all the substrates.