• Journal of Korea Port Economic Association
• /
• v.24 no.4
• /
• pp.25-46
• /
• 2008

By using data envelopment analysis(DEA) this research measures the efficiency of Korea's five seaports and their Malmquist productivity from 1997 to 2006. Under the assumption of CRS(constant returns to scale) and VRS(various returns to scale), seaports' rankings of efficiency are measured. Busan port is confirmed as a best-performed port in the various measurements. Important finding facts are as follows. 1)Busan, lncheon and Ulsan seaports are efficient ports under the assumption of CRS and VRS. 2)Gwangyang port shows 4.3% lower efficiency level compared with efficient ports. 3)Pohang port shows 27.3% lower efficiency level compared with efficient ports. 4)Average total factor productivity of Korea's five ports has been lower at the rate of 3.1% during the period from 1997 to 2006. Main policy implications are 1)Busan port is more efficient than Gwangyang port, which reflects the difference of economic activities between two regional econmies. 2)During the period 1997-2006, Korea's five largest ports has experienced lower efficiency levels in the first half period because of the 1997 Korean Financial Crisis, but higher efficiency levels in the second half period because of economic recovery. In future research the more and better data will be expected to improve the understanding of Korean seaports' efficiency characteristics.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.2
• /
• pp.104-112
• /
• 2003

The in-duct acoustical sources of fluid machines are often characterized by the source impedance and strength using the linear time-invariant model. However, negative resistances, which are physically unreasonable, have been found throughout various measurements of the source properties in IC-engines and compressors. In this paper, the effects of the time-varying nature of fluid machines on the source characteristics are studied analytically. For this purpose, the simple fluid machine consisting of a reciprocating piston and an exhaust is considered as representing a typical periodic, time-varying system and the equivalent circuits are analyzed. Simulated measurements using the analytic solutions show that the time-varying nature in the actual sources is one of the main causes of the negative source resistances. It is also found that, for the small magnitude of the time-varying component, the source radiates large acoustic power if the piston operates at twice the natural frequency of the static system. or integral submultiples of that rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.130-139
• /
• 2020

The defense industry is a future-oriented industry, in which high-tech technologies are concentrated. In addition, it is a key industry for maintaining national security, and the R&D of the defense industry is very important. With the introduction of a competitive system by defense industry companies, the necessity of improving the efficiency and productivity of defense industry companies is emerging. In this study, the efficiency of the defense industry was measured using the CCR and BCC model. In addition, super efficiency was derived using the Super-SBM model. For this study, the 2019 defense industry management analysis data of the Korea Defense Industry Association (KDIA) was used, and the analysis was performed by setting the number of researchers and investments of domestic defense industry companies as the input variables and sales as the output variables. Through this study, it is expected that the defense industry's R&D efficiency will be grasped, which will help establish a policy for fostering the defense industry in the future.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.357-368
• /
• 2003

Evaluation of shape similarity for 3D models is essential in many areas - medicine, mechanical engineering, molecular biology, etc. Moreover, as 3D models are commonly used on the Web, many researches have been made on the classification and retrieval of 3D models. In this paper, we describe methods for 3D shape representation and major concepts of similarity evaluation, and analyze the key features of recent researches for shape comparison after classifying them into four categories including multi-resolution, topology, 2D image, and statistics based methods. In addition, we evaluated the performance of the reviewed methods by the selected criteria such as uniqueness, robustness, invariance, multi-resolution, efficiency, and comparison scope. Multi-resolution based methods have resulted in decreased computation time for comparison and increased preprocessing time. The methods using geometric and topological information were able to compare more various types of models and were robust to partial shape comparison. 2D image based methods incurred overheads in time and space complexity. Statistics based methods allowed for shape comparison without pose-normalization and showed robustness against affine transformations and noise.

• Journal of Korea Multimedia Society
• /
• v.4 no.3
• /
• pp.215-221
• /
• 2001

In this paper, we propose a algorithm that apply different weight-sampling values according to the directions of the contour to reduce errors that can arise in extracting the feature of an contoured object. Especially, it 8is designed to have invariant property under the circumstances like the rotation, transition and scaling. The output matrix of feature set is made through the size function of the proposed algorithm, and the euclidean distance between the output matrix and that of the original image is calculated. Experimental result shows that the proposed algorithm reduces the euclidean distance between the original image and the changed image-by 57% in rotation and by 91% in scaling.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.85-95
• /
• 2000

This paper describes a sensorless control scheme for brushless dc motors(BLDCMs) using a phase shifter(FIPS) which can shift the zero-crossing point of the input signal with a specified amount of phase. The detection performance of the proposed FIPS is independent of the frequency of the input signal and quite robust with respect to the measurement noise. It is shown that the proposed sensorless control scheme using the FIPS is more effective in the respects of noise-robustness and cost than the previously known schemes. The generality and practicality of the proposed sensorless control scheme is demonstrated through performance analysis and experiments under various operating conditions.

• Education of Primary School Mathematics
• /
• v.21 no.1
• /
• pp.75-91
• /
• 2018

This study examines the educational meaning of the sum of the angles of a triangle in elementary school mathematics and discusses the introduction and explanation methods to convey the meaning faithfully. First, we investigated how to introduce the sum of the angles of a triangle in the Korean national mathematics curriculums from the past to the present and surveyed the experiences and opinions of the teachers. The results of the survey are summarized and discussed in three parts: The context of 'arranging angles activities' and 'measuring angles activities', the methods to convey the meaning of the sum of the angles of a triangle as an invariance, and other details.

• Journal of Korea Port Economic Association
• /
• v.33 no.4
• /
• pp.73-82
• /
• 2017

Korea is the fifth largest producer of automobiles in the world, and this industry accounts for the highest portion of the entire manufacturing industry. It is an especially important industry occupying second place in the top 10 export items in Korea. Korea exports about 3 million units of cars produced in the country and abroad, based on new cars and excluding second hand cars. Japan, along with Korea, represents a high portion of the global automobile industry, and it exports more than 4 million cars to the rest of the world. In particular, both Korea and Japan export automobile and used cars produced within the country, almost all of them by PCC(Pure Car Carrier) or PCTC(Pure Car Truck Carrier). Therefore, automobile export ports are located near automobile factories, and are being used in export to foreign countries. However, there are inefficient problems, such as poor port facilities, yard space shortage for loading and unloading operations and lack of proficiency of cargo handling companies. As a result, there are delays in cargo operations, or ships waiting have occurred. Therefore, the purpose of this study is to measure and compare the efficiency of automobile export ports in Korea and Japan. To measure the efficiency of automobile export port, we used CRS and VRS models from DEA. The input and output parameters were set as length of quay, yard area and throughput of cars, and DMUs are 25 ports for evaluating the efficiency. As a result of the efficiency measurements, two Korean ports (Gwangyang and Ulsan) and three Japanes ports (Kanda, Omaezaki, Kanmon-Shimonoseki) showed high efficiency in both models. These results can be used to establish strategies for enhancing efficiency and competitiveness of automobile export ports in Korea and Japan.

• Annual Conference of KIPS
• /
• 2004.11a
• /
• pp.805-808
• /
• 2004

본 논문에서는 두 단백질의 구조적 유사성을 기반으로 한 단백질 비교를 위해서 전처리 기법으로서의 주성분분석기법을 소개한다. 기존의 백본 및 알파탄소 간의 거리행렬(distance matrix), 2차 구조 비교기법, 구역(segment)단위의 비교 기법과 같은 단백질 비교 기법들은 위치이동(translation)와 회전(rotation)에 불변한(invariant) 차이를 구하기 위하여 거리행렬을 이용하였다. 그리고, 난 다음 이들의 최적화 과정을 거쳤다. 그러나, 본 논문에서 제시하는 전처리 기법으로서의 주성분분석기법은 단백질 구조를 전체적인 구조 관점에서 위치를 정렬시킨 후에 단백질 간의 구조를 비교하는 방식이다. 단백질의 구조의 방향성(Orientation)을 맞춘 다음에는 다양한 단백질 표현으로 구를 비교할 수 있다. 본 논문에서는 두 단백질의 구조의 유사성을 측정하기 위한 간결한 단백질 표현(representation)으로 3 차원 에지 히스토그램을 사용하였다. 이 기법은 방향성을 정렬하기 위하여 기존의 방법에서 사용되었던 반복적인 거리계산을 통한 최적화하는 과정을 없앰으로써 단백질 구조 비교 시간을 단축할 수 있는 새로운 단백질 구조 비교 패러다임을 가능하게 한다. 따라서, 이 패러다임을 통하여 적절한 단백질 구조 방향성 정렬과 단백질 구조 표현을 이용한 단백질 구조 비교 검색 시스템은 많은 양의 단백질 구조 정보로부터 원하는 형태의 단백질 구조를 빠른 시간에 검색할 수 있는 장점을 가질 수 있다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.1
• /
• pp.122-129
• /
• 2007

As the availability of an image information has been significantly increasing, necessity of system that can manage an image information is increasing. Accordingly, we proposed the content-based image retrieval(CBIR) method based on an efficient combination of a color feature and an image's shape and position information. As a color feature, a HSI color histogram is chosen which is known to measure spatial of colors well. Shape and position information are obtained using Hu invariant moments in the luminance of HSI model. For efficient similarity computation, the extracted features(Color histogram, Hu invariant moments) are combined and then measured precision. As a experiment result using DB that was supported by http://www.freefoto.com, the proposed image search engine has 93% precision and can apply successfully image retrieval applications.