• The Transactions of the Korean Institute of Power Electronics
• /
• v.2 no.3
• /
• pp.26-36
• /
• 1997

An single stage AC/DC converter based on half bridge topology suitable for low power level applications is proposed. The proposed converter has high power factor, low harmonic distortion, and tight output regulations. Asymmetrical control and synchronous rectification are adopted to reduce the switching loss and rectification loss, respectively. The modelling employing average modelling method and detailed analysis are performed to derive the design equations. According to these design equations, a prototype converter has been designed and experimented. This prototype meets the IEC 555-2 regulations with near unity power factor and high efficiency.

• Journal of Korea Multimedia Society
• /
• v.10 no.7
• /
• pp.893-901
• /
• 2007

Since real-time multimedia applications requiring duality-of-service guarantees are spreading over mobile and wireless networks, energy efficiency in wireless channels is becoming more important. Energy consumption in the channels can be reduced with decreasing the rate of scheduler's outgoing link by means of Dynamic Modulation Scaling (DMS). This paper proposes a fair queuing algorithm, termed Rate Efficient Fair Queuing (REFQ), in order to reduce the outgoing link's rate, which is based on the Latency-Optimized Fair Queuing algorithm developed to enhance Weighted Fair Queuing (WFQ). The performance evaluation result shows that REFQ does decrease the link rate by up to 35% in comparison with that in WFQ, which results in reducing the energy consumption by up to 90% when applied to the DMS based radio modem.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1741-1746
• /
• 2012

This paper introduces a new DC-DC voltage multiplier using a Dickson's charge pump and a modified voltage doubler. The voltage obtained from a conventional Dickson's chrage pump was reused for accelerating the voltage multiplication and the architecture of the proposed voltage multiplier would not decrease the device reliability of DMOS. The proposed 6-stage voltage multiplier generates about 33V with 3V voltage source. To evaluate the proposed voltage multiplier, simulations were performed with Magna DMOS technology. The simulated voltage multiplication agrees well with a theoretical value, therefore, this paper introduces a new fast voltage multiplier with minimum devices.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.569-575
• /
• 2011

Since the high heat generation of LED chips can cause a reduction in lifetime, degradation of luminous efficiency, and variation of color temperature, studies have been carried out on the optimization of LED packaging and heat sinks. Recently, LED packages have been applied to high-power lights such as car headlamps or street lights, and it is known that cooling using only free convection is not at all efficient. Thus, in this study, a heat pipe with forced convection was examined for the optimization of the cooling performance in high-power LED lights. In addition, optimal on-off control of a fan was adopted to increase the fan lifetime, since the lifetime of the fan is generally shorter than that of the LEDs.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.4
• /
• pp.282-288
• /
• 2008

In this paper, the Passive Intermodulation Distortion(PIMD) of high power RF Filter is measured with filter inner coating materials and we suggest how to reduced the PIMD of RF filter coating methods. According to the standard measurement regulation by IEC, the Passive Intermodulation Distortion of Wibro relay high power filter are measured. We suggest the coating materials and coating methods of high power filter inner structure to reduce the PIMD generating by insert loss and worse flatness of filter delay in the design of Wibro high power filter efficiently.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.476-486
• /
• 2008

It is very important to design the input filter optimally in matrix converters. But, the input power factor is deteriorated in spite of the optimal filter design due to the existence of inductor and capacitor included in the filter, and it is hard to keep high power factor in the whole operating range which is one of the major advantages of the matrix converters because the power factor is changed according to the output frequency and the load current. In this paper, we introduce the new space vector modulation method which can preserve the input power factor almost unity even though the output load or the output frequency is varied. It is also presented how to implement the proposed method effectively.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.526-531
• /
• 1998

본 논문은 농축도 0.9%의 순환우라늄 핵연료(CANFLEX-RU)에 대한 축방향 출력분포(AFD) 및 반경방향 출력분포(RFD) 특성을 조사하고 CANFLEX-RU 다발이 장전된 CANDU줄 채널의 예비 열수력 해석을 수행하였다. CANFLEX-RU 다발의 4 bundle shift 핵연료 교체 방법에 따라 AFD 분포 특성은 정점(Peak) 열속이 채널 상류쪽으로 이동하였고 채널 중심 부근에서 평탄하거나 다소 오목한 형상을 보여주었다. RFD 분포를 표현하는 적절한 변수로서 국부 다발열유속비를 정의하고, 이 비와 국부 표면열유속비의 상호 관계식을 도출하였다. 연소도에 따른 최외환봉의 국부 다발열유속비 변화를 조사한 결과로서, CANFLEX-RU 다발의 최대 국부 다발열유속비는 초기 연소도에서 발생되었고 이 값 CANFLEX-NU 다발 보다는 크고 37-핵연료봉다발 보다는 작았다. CCP 계산시에 RFD 분포 효과를 고려하는 방안으로서 최외환봉 열유속을 다발의 국부 열유속으로 가정하였다 이는 임계열유속이 -10.2% 감소한 조건을 사용하여 CCP를 계산하는 결과가 되었다. 다발-블균형 계수를 이용한 CCP 민감도 결과와 본 계산에서 얻은 CCP 결과에 의하면, CANFLEX-RU의 CCP 는 CANFLEX-NU에 비교해서 土1.0% 이내로 근사한 분포가 예상되었으며 이는 AFD 분포 효과가 RFD 분포에 의한 CCP 감소를 보상하기 때문이다. 결론적으로, CANFLEX-RU는 열수력적 설계 관점에서 CANFLEX-NU에 비교해서 열적 성능이 저하되지 않았고 따라서 기존 37-핵연료봉다발에 대한 CANFLEX-NU의 열여유도 증가와 같은 장점을 유지할 것으로 예상되었다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1880-1881
• /
• 2007

전력선 통신 채널에는 특징적으로 충격 잡음이 존재하며, 전력선 통신 시스템의 성능 열화에도 많은 영향을 준다. 이는 일반적인 배경 잡음에 비해 많게는 수십 dB 이상의 레벨을 가지면서, 임의 시간적으로 발생함으로써 추정 및 제어 또한 어렵기 때문이며, 전력선 통신 시스템이 Mbps급으로 고속화 되면서 주파수 대역이 확장되고, 확장된 대역상에 다중 반송파를 이용하여 대용량의 데이터를 전송하는 변복조기법들이 적용됨에 따라, 시간 영역에서 비교적 짧은 시간 동안 존재하는 충격 잡음이 주파수 영역에서 사용 주파수 전체 대역상에 영향을 줌으로써 시스템 전체 성능 저하의 큰 요인이 되고 있다. 본 논문에서는 이러한 충격 잡음이 고속 전력선 통신 시스템에서 사용되는 OFDM(또는 DMT) 방식 수신기의 복조기 출력단 SNR에 미치는 영향을 분석 및 단순화하고, 시뮬레이션을 통해 검증한다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.110-116
• /
• 2013

The amplification rate of a RF repeater is limited by the feedbacked signals from the same repeater. And an ICS (Interference Cancellation System) repeater has been developed to remove the feedbacked signals. The ICS repeater estimates the amplitudes and the phases of the feedbacked signals and removes the estimated feedback signals from the received input signal of the repeater. However, it requires lots of hardware complexity and this leads to the increase the cost of the repeater. Moreover, the ICS repeater can not solve the pilot pollution problems. To solve these problems, we have studied the implementation and adaptation of smart antenna system for RF repeaters. We have designed a smart antenna system with a switching beam structure in order to reduce the hardware and computational complexity. After analyzing the proposed smart antenna system, we found out that the amplification rate of the proposed repeater increases 23dB compare to the amplification rate of ICS repeater and the output SINR increases 6dB compare to the ICS repeater.

• Journal of the Korean Society of Radiology
• /
• v.14 no.2
• /
• pp.139-148
• /
• 2020

The purpose of this study is to propose a method to optimize the performance of Digital Radiography (DR) by analyzing the effect of exposure time change on the stability of radiation output and image quality. The experimental method was used to change the exposure time to 50 msec, 100 msec, 200 msec, and 400 msec so that the Percentage Average Error (PAE), Time-to-Radiation Dose Curve, Signal to Noise Ratio (SNR), Contrast to Noise Ratio (CNR) and theses analysis were performed to evaluate the normal operation of parameters, radiation output and image quality. As a result, all the parameters used in the experiment showed the Percentage Average Error in the normal range, and the shorter the exposure time, the stability of radiation output and image quality decrease. In conclusion, it was found that the performance of Digital Radiography can be optimized when stable radiation output and image quality are applied by applying 100 msec ~ 200 msec exposure time.