• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.158-168
• /
• 1995

연삭숫돌 선택은 공작물제거량, 숫돌의 소모량, 표면정도 및 공작물의 물리적,화학적 특성을 고려하여 설정하는 것을 기본으로 한다. 연삭가공은 구성인자의 상호관계가 복잡하여 이중에서 어느한 요소만을 고려하여 설정하기 어렵고 정량적 기준 또한 정해져있지 않아 현실적으로는 숙련자의 정성적이고 경험적 지식에 따른 주관적 척도에 의존하는 것이 대부분이다. 또한, 연삭숫돌은 작업조건중에서 대량생산을 제외하고는 되도록이면 현장에 구비되어 있는 작업가능한 연삭숫돌 중에서 선택하는 것이 바람직하다. 따라서 본시스템에서는 이와같은 점을 고려하여 최적 연삭숫돌선택을 퍼지이론에 기초한 현장 숙련자의 지식을 활용하므로써 연삭숫돌선택의 효율성을 도모하는 동시에 현장에 연삭숫돌이 구비되지 않은 경우도 고려하여 연삭숫돌설정에 우선순위를 제시하므로써 작업자에 연삭숫돌선택의 유연성을 부여하였다. 또한, 실용성있는 전문가시스템의 구축을 위해 정성적이고 경험적인 지식의 활용을 위한 지식표현으로 설문조사에서 얻은 테이타를 x$^{2}$-분포에 따른 추정신뢰구간을 구해, 이를 토대로한 비대칭 삼각퍼지함수의 결정법을 제시하고, 이를 이용해서 구축한 시스템의 실행결과의 타당성을 비교하고자 한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.4
• /
• pp.142-148
• /
• 2008

This study aims to find the optimal cutting conditions, which are obtained by grinding condition, and the grinding characteristics and condition of constant velocity joint were investigated with respect to wheel velocity, depth of cut, feed speed. Grinding machine has been widely used in manufacturing optical reflects of metal. Such as steel are easy to be machined because of their proper material. As a result I obtained the data of grinding conditions makes good surface roughness and the optimal condition of grinding and get the mesh condition. The purpose of this study is to find the optimum grinding wheel characteristics for cutting constant velocity joint.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.7-12
• /
• 2019

Generally, end effectors for automatic robots can use ceramics such as alumina(Al₂O₃) and silicon carbide(SiC). In this study, black alumina was developed and used in the semiconductor field through powder molding press forming. The black alumina can be mass produced.Alumina and black alumina were ground using a plane grinder to apply to the end effector of an automatic robot. The optimal cutting conditionswere found by analyzing the surface roughness(Ra) of black alumina through grinding. The alumina surface roughness is the feed rate was about 0.72 mm/sec, and the number of revolutions was best at 0.4879 ㎛ at 1700 rpm. In addition, the black alumina surface roughness shows a precision of less than 0.2 ㎛ in most cutting conditions. The feed rate was about 0.72 mm/sec, and the number of revolutions was best at 0.1361 ㎛ at 1900 rpm. The surface roughness of black alumina was better than that of alumina by about 0.35 to 0.47 ㎛.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.6
• /
• pp.36-43
• /
• 2022

Automobile brake discs are a major part of automobiles that are directly related to driver safety, and prevention of judder and squall noise is very important. This phenomenon occurs for complex reasons such as the precision and assembly of the brake module, and the material of the brake disc. The purpose of this study is to analyze the effect of the grinding wheel's grain size on the grinding conditions when machining cast iron, the material of the brake disc, and to derive the optimal grinding conditions through this.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.3
• /
• pp.27-43
• /
• 1991

연소 가공은 고품질 고정도를 필요로 하는 경우 매우 유효한 가공방법이지만 그 공정이 많은 Parameter에 의해 구성되기 때문에 동일한 조건에서도 정량적인 평가가 어려우므로 작업현장 에서는 과학적 원리와 공학적 지식 보다는 숙련자의 경험과 기능에 의존하고 있는 실정이다. 본 연구에서는 이와 같은 국면에 대처한 문제 해결을 위해 Computer가 인간사고에 근접 할 수 있도록 Fuzzy 이론과 Default 이론을 도입하고 전문가의 이론적 지식과 숙련자의 감각적 지식을 적극 수용 하여 연소용 Expert system (최적 가공 조건의 설정 System과 Trouble shooting system)을 개발하였다. 또한 연소 가공 Data의 불확실한 애매성을 효과적으로 이용 할 수 있도록 Fuzzy 가능성이론에 의해 가공 Datad을 회귀 분석하여 실가공 Data base에 축적시켜 재활용토록 설계하었으며 개발된 본 System 의 실행 결과 그 활용성이 높음을 입증하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.3
• /
• pp.394-400
• /
• 2012

Due to the increasing demand for carious methodologies, the quality improvement of products were introduced. A brush, the most frequently used type of grinding process, is one of the deburring. In order to produce consistent burr shape, various machining conditions have been combined and applied to disk grinding process. By tool dynamometer, acoustic emission sensor and acceleration sensor depend on changes in processing conditions(depth of engagement, cutting speed, workpiece position, workpiece orientation, cutting time) signals were obtained for brush deburring grinding system. Root mean square obtained by processing the signal processing conditions by analyzing the characteristics of deburring is to derive the optimum conditions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.87-93
• /
• 1994

This paper describes on the establishment of an optimal internal grinding conditions for the purpose of improving the grinding efficiency against to the high-speed grinding. Through the fundamental grinding tests for the brittle and hardened material, we are concluded that high-speed internal grinding is effective to improve the grinding accuracy as well as the grinding efficiency. The obtained results are as follows: (1) Under the speed ratio $(V_w/V_g)$ is constant, it is possible to increase the grinding efficiency with satifying the constraint conditions. (2) Increasing the wheel velocity, surface roughness and out-roundness are improved. (3) Under the wheel depth of cut is constant and increasing the speed ratio, workpiece residual stress is decreased. The described method, in this paper, is capable of determining the optimum internal grinding conditions taking into account some constraint conditions, and practical algorithm for optimum internal grinding conditions are presented.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.5
• /
• pp.40-46
• /
• 2017

A plasma gas control apparatus for semiconductor plasma etching processes securely holds a cathode for forming a plasma, confines the plasma during the plasma etching process, and discharges gas after etching. It is a key part of the etching process. With the advancement of semiconductor technology, there is increasing interest in parts for semiconductor manufacturing that directly affect wafers. Accordingly, in order to replace the plasma gas control device with a CVD-SiC material superior in mechanical properties to existing SiCs (Sintered-SiC, RB-SiC), a study on the grinding characteristics of CVD-SiC was carried out. It is confirmed that the optimal grinding condition was obtained when the result table feed rate was 2 m/min and the infeed depth was $5{\mu}m$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.1
• /
• pp.171-181
• /
• 2001

Recently, the development of CNC machine tools seems to bring about progressional high speed, precision and automation in cutting processing, but is unlikely to avoid the generation of burr arising from plastic deformation, which may result in deterioration of improvement in the precision and productivty of products. In this study, Experiment has been carried out to prevent and decrease the grinding burr under various working conditions ; working speed, side cutting edge, back rake angle, disengage angel.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.145-150
• /
• 1992

화인세라믹의 우수한 공학적 특성으로 인한 최근의 이용가치 증대와 더불어 세라믹의 고정도 가공에 대한 관심이 높아지고 있다. 다이아몬드휠을 이용한 연삭이나 다이아몬드 공구를 이용한 선삭에 의해 세라믹의 고정도 표면생성을 실현시키고자 하는 연구가 활발히 진행되고는 있으나 아직 미흡한 상태에 있다. 따라서 전통적으로 고정도 표면생성에 널리 용되어 온 래핑에 의한 표면다듬질이 현재 행하여지고 있는 일반적인 방법이다. 본 연구에서는 화인세라믹의 고정도 표면생성을 위한 원통래핑 공정의 최적화 방법으로 실험계획법의 한 응용분야인 반응표면분석법을 이용하였으며 그 결과, 적은 재료와 시간으로 능률적이고 체계적인 실험 및 통계적인 분석을 통해서 원통세라믹의 고정도 표면생성을 위한 최적래핑조건을 찾아내었다.