References
- Lee, Y. C., Kim, G. N., and Kwak, T. S., 2010, "Investigation for Mirror-surface Machining Properties of Mold Core of Glass Molding Press by Parallel Grinding and Magnetic Assistance Polishing," Journal of the KSPE, Vol. 27, No. 12, pp. 22-27.
- Kim, G. D., Loh, B. G., and Kim, J. S., 2006, "Development of Ultra-precision Ultrasonic Surface Machining Device Using Cyclic Elliptical Cutting Motion of a Couple of Piezoelectric Material," Journal of the KSPE, Vol. 5, No. 3, pp. 29-35.
- Yoon, J. H., Lee, J. W., Jung, K. Y., and Jung, M. S., 1998, "Cutting Condition for Improving Cutting Efficiency and Accuracy by Ball Endmill on a Machining Center," Journal of the KSMTE, Vol. 7, No. 3, pp. 99-103.
- Yoo, S. M., 2009, "A Study on the Flexible Disk Deburring Process Arc Zone Parameter Prediction Using Neural Network," Journal of the KSMTE, Vol. 18, No. 6, pp. 681-689.
- Park, D. S., Han, J. Y., Seong, E. J., and Han, I. Y., 2006, "Deburring of the Inner Edge in Intersection Hole by Powder Blasting," Proceedings of the KSMPE Spring Conference, pp. 44-49
- Yoon, J. H., Ahn, B. W., and Park, S. J., 2004, "A Deburring Characteristics of Small Punching Holes using Micro Press," Journal of the KSPSE, Vol. 13, No. 3, pp. 61-67.
- Won, J. Y., Choi, Y. J., Lee, S. Y., and Choi, H. J., 2003, "Deburring Technology using Ultrasonic Cavitation," Proceedings of the KSME Fall Conference, pp. 1798- 1803.
- Bae, J. Y., Joo, Y. M., Kim, J. U., and Lee, S. R., 2002, "A Development of Deburring System using Vision Sensor," Proceedings of the KSME Spring Conference, pp. 900-904.
- Choi, G. J., Kim, Y. W., Shin, S. W., and Ahn, D. S., 1998, "Deburring of Irregular Burr using Vision and Force Sensors," Journal of the KSPSE, Vol. 2, No. 3, pp. 83-88.
- Shin, S. W., Gal, C. S., and Ahn, D. S., 1996, "A Study on the Automation of Deburring Process Using Expert's Skills," Proceedings of the KSPE Fall Conference, pp. 685-688.
- Park, K. T., and Choi, J. W., 1994, "Intelligent Robot System for Deburring," Proceedings of the KSPE spring Conference, pp. 371-376.
- Shin, K. S., 2010, "A study on the Character of Brush Deburring Grinding System," Journal of the KSMTE, Vol. 19, No. 3, pp. 414-418.
- Shin, K. S., 2001, A study on the Analysis and Optimization of Brush Grinding Process, A Thesis for a Doctorate, Kyunghee University, Republic of Korea.
- Mathai, G., and Melkote, S., 2012, "Effect of Process Parameters on the Rate of Abrasive Assisted Brush Deburring of Microgrooves," International Journal of Machine Tools and Manufacture, Vol. 57, pp. 46-54. https://doi.org/10.1016/j.ijmachtools.2012.02.007
Cited by
- Statistical Analysis of Industrial Grinding Brush Force Characteristics Based on Finite Element Approach vol.2018, pp.1563-5147, 2018, https://doi.org/10.1155/2018/7362705
- An Experimental Study on the Deburring Characteristics according to rpm Change of Deburring Wheel vol.17, pp.5, 2018, https://doi.org/10.14775/ksmpe.2018.17.5.103