• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.5
• /
• pp.37-42
• /
• 1983

The elliptic functions have transmission zeros on the imaginary axis and exhibit equal ripples in the stopband as well as in the passband. As a consequence they can be made optimal in the sense that the transition band is minimal. However the time domain behaviors turned out to be inferior to those of Chebyshev and Butterworth responses. This paper investigates the unit step responses and impulse responses in order to analyze the effects of various parameters such as passband attenuation, stopband frequencies M. etc., The following are the prominent features. Step responses of elliptic filters rise faster and produce larger overshoots and undershoots with higher natural frequencies. In the case of even functions, the initial values are non-zero which decreases as $\omega$s increases. Unlike Butter-worth or Chebyshev cases the impulse responses start with nonzero valses which also decrease as $\omega$s or order of the function increases. Eight figures are included to illustrate above analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.1E
• /
• pp.56-64
• /
• 1995

The least mean fourth (LMF) adaptive algorithm is a stochastic gradient method that minimizes the error in the mean fourth sense. Despite its potential advantages, the algorithm is much less popular than the conventional least mean square (LMS) algorithm in practice. This seems partly because the analysis of the LMF algorithm is much more difficult than that of the LMS algorithm, and thus not much still has been known about the algorithm. In this paper, we explore the statistical convergence behavior of the LMF algorithm when the input to the adaptive filter is zero-mean, wide-sense stationary, and Gaussian. Under a system idenrification mode, a set of nonlinear evolution equations that characterizes the mean and mean-squared behavior of the algorithm is derived. A condition for the conbergence is then found, and it turns out that the conbergence of the LMF algorithm strongly depends on the choice of initial conditions. Performances of the LMF algorithm are compared with those of the LMS algorithm. It is observed that the mean convergence of the LMF algorithm is much faster than that of the LMS algorithm when the two algorithms are designed to achieve the same steady-state mean-squared estimation error.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.8
• /
• pp.531-540
• /
• 2022

In this paper, we present an algorithm that identifies artillery type and rapidly predicts the impact point based on the IMM filter. The ballistic trajectory equation is used as a system model, and three models with different ballistic coefficient values are used. Acceleration was divided into three components of gravity, air resistance, and lift. And lift acceleration was added as a new state variable. The kinematic condition that the velocity vector and lift acceleration are perpendicular was used as a pseudo-measurement value. The impact point was predicted based on the state variable estimated through the IMM filter and the ballistic coefficient of the model with the highest mode probability. Instead of the commonly used Runge-Kutta numerical integration for impact point prediction, a semi-analytic method was used to predict impact point with a small amount of calculation. Finally, a state variable initialization method using the least-square method was proposed. An integrated algorithm including artillery type identification, impact point prediction and initialization was presented, and the validity of the proposed method was verified through simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.45-49
• /
• 2004

An image enhancement method using modified anisotropic diffusion filter is proposed in this paper. It employs sensor noise estimation and scale space methods based on the minimum reliable scale. Then the anisotropic diffusion filter is modified by the calculated critical value function and local gradient. Through simulation, it is verified that the proposed algorithm has the capability of little or no noise amplification in homogenous region as well as superior edge enhancement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1734-1745
• /
• 1996

In this paper, a modified fixed-delay tree search with decision feedback(FDTS/DF) for compensation of non-linear distortion in digital magnetic recording channels is discussed. Since the nonlinear distortion, which becomes significant as recording density increases, is generally well modeled by the discrete Volterra series, the proposed equlizer is composed of a nolinear feedforward filter, a linear feedback filter, and a nonlinear distorton table, the values of which are determined by considering the effect of nonlinear distortion due to future data as well as the previous and current one. At the decision stage of FDTS, a path minimizing the branch metric is chosen by using the previously detected values, current predicted value, and future predicted value. We compare the performance of the linear FDTS/DF, the previous nonlinear FDTS/DF, and the proposed nonlinear FDTS/DF by computer simulation, and confirm that the proposed one chieves the best performance at high-density recording.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.63-68
• /
• 2003

Almost the system are usually taken by means of shapes and positions of ridge's end-points and bifurcation in the fingerprint recognition. but we studied about recognition of polluted fingerprint by chain code ridges. the results and sequence of processing are summarized as follows. (1)Capture several kinds of polluted fingerprint image. (2)Preprocessing(median filtering for removing noises, local and global histogram equalization, dilation and erosion, thinning and remove pseudo image), (3)Rebuild ridge line after Least Square Processing, (4)Compute distribution of chain code vector, (5)The results are almost same values of each vector of preprocessed fingerprint images. From the results, we can surmised more successful fingerprints recognition system in combination with other system by singular points

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.790-796
• /
• 2014

Identification of communication channels is a problem of important current theoretical and practical concerns. Recently proposed solutions for this problem exploit the diversity induced by antenna array or time oversampling. The method resorts to an adaptive filter with a linear constraint. In this paper, an approach is proposed that is based on decomposition. Indeed, the eigenvector corresponding to the minimum eigenvalue of the covariance matrix of the received signals contains the channel impulse response. And we present an adaptive algorithm to solve this problem. Proposed technique shows the better performance than one of existing algorithms.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.7
• /
• pp.333-338
• /
• 2016

This study is to estimate proximity without direct measurement of the weight of fresh ginseng. For this work, we developed a ginseng image acquiring instrument and obtained 126 ginseng images using the instrument. Image analysis and parameter extraction process was used C language based Labwindows/CVI development tools and open source library OpenCV. Estimation formula is made by weighing the sample with image analysis of fresh ginseng. We analyzed the correlation between the pixel number and the weight of ginseng using a linear regression approach. It was obtained a strong positive correlation coefficient of 0.9162 with a linearity value.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.23-26
• /
• 2019

본 논문에서는 X-Ray 영상에서 용접한 부분의 기공이나 균열 등의 결함 영역을 추출하는 새로운 방법을 제안한다. 제안된 방법은 세라믹 X-Ray 영상에서 비등방성 확산 필터를 적용하여 영상의 잡음을 제거하고, 수직 및 수평 히스토그램을 각각 적용하여 용접 영역을 추출한 후, 최소 자승법을 적용하여 배경 밝기를 제거하고, 사다리꼴 형태의 Fuzzy Stretching기법을 적용하여 명암 값을 강조하여 결함 영역과 그 외의 영역간의 명암 대비를 강조한다. 그리고 Fuzzy C_Means 알고리즘을 적용하여 결함 영역을 세분화한 후, Fuzzy C_Means을 적용하여 생성된 클러스터들의 중심 명암 값을 이용하여 ${\alpha}_-cut$을 설정한 후에 임계구간을 구하고 영상을 이진화하여 최종적으로 결함 영역을 추출한다. 제안된 방법의 결함 추출 성능을 확인하기 위하여 세라믹 X-Ray 영상을 대상으로 실험한 결과, 기존의 방법보다 결함 영역이 정확히 추출되는 것을 확인할 수 있었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.105-110
• /
• 2016

To reduce the cost and volume of a digital camera, a subsampled color filter array(CFA) image is used and demosaicking is applied to estimate the missing color values. However, aliasing, the overlaps of signals in the frequency domain, occurs when signals are subsampled. This causes aliasing artifacts such as false colors and zipper effects in demosaicking processes. In this paper, the algorithm estimating high-quality color images by removing aliasing artifacts in them is proposed. The aliasing region map is estimated using the sub-sampled signals of the CFA image. By using the aliasing region map and the estimated luminance image, the least squares problem of the observation models is designed and aliasing artifacts are eliminated. The experiments demonstrate that the proposed algorithm restores color images without aliasing artifacts.