• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1876-1883
• /
• 2016

The new channel model for high data rate common data link(CDL) is proposed. The Two-ray channel, which is composed of the reflected signals on the front ground of the receiver, is considered in this paper. This channel arises due to the curvature of the earth when the altitude of the transmitter is tens of kilometers and distance between the transmitter and the receiver is hundreds of kilometers. The Two-ray channel is modeled by estimating the maximum delay profile and the power delay profile, depending on the transmitting and receiving beamforming angle and the radiation pattern of antenna. The power delay profile has a larger effect on the bit error rate(BER) over signal to noise ratio(SNR) than the maximum delay profile, because the distance range is too long in the proposed channel model.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.143-149
• /
• 2022

In this paper, we evaluate the underwater frequency diversity communication performance of Selective Combination (SC) using Maximum Likelihood Estimation (MLE). In an underwater multipath frequency selective channel, destructive interference fading due to delay spread of a received signal affects the increase in error and Signal to Noise Ratio (SNR) variability of an underwater acoustic communication. Selective Combination frequency diversity using a single sensor is applied as a transmission performance improvement technique according to the frequency selectivity of a channel. In the sea experiment applying MLE for SC decision value extraction, we evaluate the performance of SC frequency diversity and MLE-SC frequency diversity. In experiment result, we confirm through experiment that the Bit Error Rate (BER) is relatively lower when the decision value extracted through MLE-SC is applied than when the SC decision value is fixed.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.11-19
• /
• 2016

Two representative residual static methods of traveltime decomposition and stack-power maximization are discussed in terms of application to land seismic data. For the model data with synthetic shot/receiver statics (time shift) applied and random noises added, continuities of reflection event are much improved by stack-power maximization method, resulting the derived time-shifts approximately equal to the synthetic statics. Optimal parameters (maximum allowable shift, correlation window, iteration number) for residual statics are effectively chosen with diagnostic displays of CSP (common shot point) stack and CRP (common receiver point) stack as well as CMP gather. In addition to removal of long-wavelength time shift by refraction statics, prior to residual statics, processing steps of f-k filter, predictive deconvolution and time variant spectral whitening are employed to attenuate noises and thereby to minimize the error during the correlation process. The reflectors including horizontal layer of reservoir are more clearly shown in the variable-density section through repicking the velocities after residual statics and inverse NMO correction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.7-13
• /
• 2009

In This Paper, we propose relay schemes for network-coding based two-way relay communication in multi relay channel. Two-way relay channel communication is a bi-directional communication that two users exchange their data with the help of a relay. Network-coding based Two-way relay communication can achieve more throughput compared to conventional two-way relay communication. In this paper, we propose relay selection schemes to provide maximum performance considering instantaneous signal-to-noise in multi-relay channel. Simulation results show that the proposed relay selection schemes can provide diversity order according to the number of relays.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.2072-2079
• /
• 1998

In this paper, we propose a new decorrelating detector called pseudo-inverse-filtering type decorrelating detector for asynchronous CDMA channels. We first show that the matched filtering and decorrelating operations of the existing decorrelating detectors can be replaced with the pseudo-inverse filtering operations in synchronous channels, and using this fact we show that the decorrelating detector has the largest SNR among the linear detectors that can eliminate MAI. Then we introduce asynchronous pseudo-inverse filtering type decorrelating detector by extending this result for asynchronous channels, and discuss implementation methods of the proposed decorrelating detectors. Since the proposed scheme employs a decentralized structure for updating coefficients, it has the flexibility to add/remove users. Finally we analyze the performance of the proposed decorrelating detector in terms of the bit error rate, and examine its performance improvements over the conventional detectors through computer simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.430-435
• /
• 2022

In this paper, we consider the non-orthogonal multiple access (NOMA) technique in the heterogeneous network (HetNET) consisting of a single macro base station (BS) and multiple small BSs, where the perfect successive interference cancellation is assumed for the NOMA signals. In this paper, we propose a deep learning-based user association and power allocation scheme to maximize the data rate in the NOMA-based HetNET. In particular, the proposed scheme includes the deep neural network (DNN)-based user association process for load balancing and the DNN-based power allocation process for data-rate maximization. Through the simulation assuming path loss and Rayleigh fading channels between BSs and users, the performance of the proposed scheme is evaluated, and it is compared with the conventional maximum signal-to-interference-plus-noise ratio (Max-SINR) scheme. Through the performance comparison, we show that the proposed scheme provides better sum rate performance than the conventional Max-SINR scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.932-939
• /
• 1998

In this paper, we analyze the performance of a multicode-CDMA system which have been proposed for the multimedia communications. The performance of a multicode-CDMA system, providing good spectrum efficiency as well as serving various bit rates, is analyzed with multipath, frequency selective, slowly fading Rayleigh channel. Also the proposed scheme adopting RAKE receiver with MRC(Maximal Ratio Combine) is advantageous to multipath channel. For a practical channel modeling, the JTC(Joint Technical Committee) recommended channel model(JTC(AIR) 23-065R6) is applied to simulation. The proposed schemehas serial-to-parallel convertor which splits input data stream of 2 Mits/s into 20 branches o 100 kbits/s. From the result of simulation, the case of RAKE receiver with 3 fingers to reduce the system complexity required the relatively large $E_{b}/N_O$ of 0 dB~1.5 dB, compared to the case of RAKE receiver with the number of path finger to keep the average error rate to be $1{\times}10^{-3}$ in channel A.

• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.251-258
• /
• 1999

A high-resolution seismic survey was conducted on the abandoned tidal flat in Shihwa Lake on the west coast of Korea. A portable vibrator was used as a seismic source and 217 shot gathers with 48-channel system were acquired. F-k filtering, residual static corrections and post-stack frequency filtering are found to be useful for signal enhancement. The overburden is divided into two seismic depositional units. Unit I is deposited in tidal environment characterized by parallel and high continuity reflection pattern. This unit comprises a dry layer (Unit Ia) and a wet layer (Unit Ib) having averagely 5 and 15 meters thick, respectively. Unit II unconformably overlain by Unit I exhibits discontinuity and hummocky reflection pattern, indicating complex channel-fill sediments in estuary. The maximum thickness of this unit is approximately 20 meter. Acoustic basement is considered as Precambrian granitic gneiss occurred in the surrounding area.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.117-127
• /
• 1996

In this paper, we present the bit error performances of 4PSK and 8PSK signal transmission schemes using Maximal Ratio Combining diversity reception for m-distribution and Rician fading channels. The suitability of modeling a Rician fading environment by a properly chosen m-distribution model is examined. Using the error performance of the derived equation has been evaluated and shown in figures as a function of fading index (m), Rician factor (K), diversity branches number (L) and E($E_b/N_o$). It is found that MRC (Maximal Ratio Combining) diversity technique is very efficient for reducing the effects of fading, And then, diversity benifit much large as depth of fading becomes deeper but more decreases as many diversity branchs. Also the results show that the error performance corresponds as much as fading becomes weak and increases with the number diversty branches.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.1
• /
• pp.54-63
• /
• 2005

Detection ranges of acoustic instruments mainly used for fisheries and their research are derived as the range bordered by a certain signal-to-noise ration (SNR) thershold. The SNR is depicted by several factors on transmitting and receiving, sound propagation, scattering by objects, and mainly self-ship noise. The detection ranges are shown for several fisheries instrument, such as echo sounder, quantiative echo sounder, and bio-telemetry system. The results can be used for designing the instruments, examining the capability of user's own instruments, and interpreting obtained data or echograms. Increasing transmitting power is not as effective for high frequencies as for low frequencies to increase the detection range. Comparison of volume backscattering strengths obtained by the quantitative echo sounder at several frequencies should be done within the same detection range. By applying the concept of the detection range for the bio-telemetry receiver beams, the number of the beams and the beamwidths can be determined.