• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.5
• /
• pp.476-482
• /
• 2009

The effect of pintle shape on the thrust level of pintle-nozzle Solid Rocket Motor(PNSRM) was studied numerically using the Spalart-Allmaras turbulent model of Fluent. Mass flow rate of PNSRM was always less than theoretical value and the extent of decrease in mass flow rate grew in the large pintle because of increase in the relative boundary layer thickness between pintle body and nozzle wall. The bigger pintle size was, the more thrust of pintle tip pressure was obtained. Meanwhile the more thrust of nozzle and chamber pressure decreased. Hence, total thrust of big pintle was less than a small pintle under same throat area condition. Specific impulse was relatively flat for all pintle shape.

• The Journal of the Korea Contents Association
• /
• v.5 no.2
• /
• pp.177-185
• /
• 2005

The purpose of this study was to evaluate the effect of combined exercise on body composition, health-related fitness and blood lipid. Subjects was ten middle-aged man. The combined exercise program consisted of performed for 60min in a bout, 4 times a week at the intensity of heart rate max$(50\sim75%)$ for 12 weeks. and the change of %fat, learn body mass, body mass index, back strength, sit-up, sit and reach total cholesterol, low density lipoprotein cholesterol, triglyceride and high density lipoprotein cholesterol have been measured before and post exercise 12 weeks. Paired t-test was performed for data analysis at the 0.05 level of significance.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.125-134
• /
• 1996

The base-isolation of building, as appeared in many studies, has shown remarkable performance in seismic response attenuation of the internal system as well as the building structure itself. But for the case that the internal system is submerged and hence subject to a considerable hydrodynamic effect, the seismic response of the system due to the base-isolation of building can be greater than the case that they are in air. This paper presents the dynamic analysis of a submerged internal system on base-isolated building to show such an example. The results show that an additional treatment is required to reduce the adverse effects on the seismic response of such a system when the building is base-isolated, and that the system response can be reduced to some extent by an appropriate control of fluid gap between the system and the building structure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.254-257
• /
• 2010

Acoustic design parameters of a Helmholtz resonator are studied experimentally and numerically for acoustic stability in a model acoustic tube. Acoustic damping is quantified by the amplitude of the fluid velocity in mass-spring-damper system. The length of an orifice, the volume of a cavity, and the diameters of an orifice and a cavity in the resonator are selected as design parameters for tuning of the resonator. It is found that acoustic damping capacity is increased by shorter orifice and longer cavity in the resonator. As the ratio of the orifice diameter to the cavity diameter increases in the resonator, the damping capacity decreases.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.83-87
• /
• 1998

To reduce the supersonic jet noise from the liquid rocket engine, water injetion silencers were designed and tested. Test variables were the mass flow rate of water jet, the length of primary pipe and the diameter of expansion pipe. Followings are the results of this study. 1. From the same mass flow rate of water, longer primary pipe was more effective to reduce the noise. 2. Noise level was significantly reduced with increasingly water flow rate. 3. The optimum water flow rate was 10～12 times of the propellant flow rate. 4. By installing expansion pipe, noise level was reduced approximately 30㏈ compared to without expansion pipe

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.6
• /
• pp.586-591
• /
• 2015

This study discusses numerically-explored thermal performances of hybrid fin heat sinks (HF HSs) for lightweight thermal management of LED modules under natural convection. A hollow hybrid fin heat sink (HHF HS) and a solid hybrid fin heat sink (SHF HS) are proposed as HF HSs. A 3-D CFD analysis has been carefully conducted to obtain reliable numerical results. The 3-D CFD study investigates the effects of both fin spacing and an internal channel diameter on performances of the HHF HS and the SHF HS. The study results show that the mass-based thermal resistance of the HHF HS is 20~32% smaller compared with the pin fin heat sink (PF HS). The results also show that the mass-based thermal resistance of the HHF HS decreases with the increase of the channel diameter. These results are mainly due to coupled effects of the mass reduction and heat pumping through an internal channel. Considerably superior mass-based thermal performances of the HHF HS to the conventional PF HS suggest the feasible application for the lightweight thermal management of the LED modules under natural convection.

• Journal of KIISE:Software and Applications
• /
• v.34 no.10
• /
• pp.889-899
• /
• 2007

In proteomics, recent advancements In mass spectrometry technology and in protein extraction and separation technology made high-throughput analysis possible. This leads to thousands to hundreds of thousands of MS/MS spectra per single LC-MS/MS experiment. Such a large amount of data creates significant computational challenges and therefore effective data analysis methods that make efficient use of computational resources and, at the same time, provide more peptide identifications are in great need. Here, SIFTER system is designed to avoid inefficient processing of shotgun proteomic data. SIFTER provides software tools that can improve throughput of mass spectrometry-based peptide identification by filtering out poor-quality tandem mass spectra and estimating a Peptide charge state prior to applying analysis algorithms. SIFTER tools characterize and assess spectral features and thus significantly reduce the computation time and false positive rates by localizing spectra that lead to wrong identification prior to full-blown analysis. SIFTER enables fast and in-depth interpretation of tandem mass spectra.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.4
• /
• pp.47-55
• /
• 2009

The purpose of this study is to verify the transfer function of input acceleration and output control force by linearizing a velocity-dependent damping term of Liquid Column Vibration Absorber (LCVA). Analytical and experimental research is conducted to identify natural frequency, damping ratio and participated mass ratio of LCVA with various section ratios of vertical and horizontal areas. Findings obtained experimentally by the shaking table test are compared with analytical findings using optimization technique with constraints. The results indicate that the level of liquid and section ratio of LCVA affect the characteristics of damping ratio and mass ratio. Damping and mass ratio increase as the section of vertical column of LCVA decreases, due to turbulence in the elbow of LCVA.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.483-490
• /
• 2005

Mass resolution of the time of flight aerosol mass spectrometer for an aerosol component analysis depends on the initial direction and the initial energy of the ions. We have found that the shape of the optimum post focusing electric field is not linear. The maximum electric potential should be applied to the ions whose initial direction is 90 degree. To check on the post focusing effects, we have installed a laser ablation mass spectrometer. By using this LA-MS, we have found that the average energy distribution of the laser ablated ions is 8 eV. To establish the optimum mass resolution, a time delay and a high voltage are needed, and the results of the study show that 1500 nsec, and 3.7 kV are the optimum parameters for our system respectively. The isotope mass signals of copper show a good resolution.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.221-222
• /
• 2003

최근 농촌지역의 생물질 소각으로 인해 일시적이나마 시정의 급속한 악화, 호흡곤란과 같은 심각한 대기오염문제가 발생하고 있다. 우리 나라의 경우 이러한 생물질 소각은 주로 농사활동과 깊은 관련이 있는데 봄철과 가을철에 많이 발생한다. 본 연구의 측정 지점의 선행 연구결과를 보면 생물질 소각이 활발히 전개된 시기 12시간 포집된 PM2.5의 질량농도가 200$\mu\textrm{m}$/m$^3$까지 이르는 것으로 나타났고(박승식, 2002), 비록 연구시기는 다르지만 작년 6월 측정결과에 따르면 생물질 소각이 없었던 날에 비교하여 PM10, PM2.5 질량분포가 각각 340%, 360%증가하는 것으로 조사되었다(유성윤, 2002). (중략)