• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.11 no.9
• /
• pp.422-430
• /
• 2001

An electric drill is a handy tool used in a machine shop, which consists of motor, gear, bearing, shaft, and case, i.e., a gear driving system. Low level vibration and noise of the electric drill can bring the assurance of the quality and reliability of the machine. The vibration sources of the electric drill should be investigated for the reduction of the vibration and noise of the system. Through the experiments in laboratory and the various signal processing procedure for the measured vibration and sound signals, the characteristics of the vibration of the electric drill are investigated. And its propagation path is sought using partial coherence function.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.155-161
• /
• 1999

아이들 상태에서 차실 내에 불쾌감을 주는 매우 높은 크기의 소음이 발생하였다. 본 논문에서는 아이들 시 문제소음의 원인을 분석하고 저감하는데 필요한 관련이론의 적용과 이에 수반되는 데이터측정, 데이터처리 및 데이터 해석과정을 자세하게 기술하였다. 소음진동 측정 및 분석 결과 문제의 소음은 엔진의 회전 2.5차 성분을 가지고 구조기인소음이었다. 아이들 시 문제의 실내소음에 영향을 미치는 구조전달경로들의 기여도를 분석하기 위해 소음경로해석시험 및 모드시험을 실시하였다. 시험분석 결과에 따라 기여도가 놓은 배 기계 및 트랜스미션계의 진동 전달특성을 개선하므로써 만족할 수준의 소음 저감효과를 얻었다.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.481-485
• /
• 2000

Vibration screening trench is very effective to reduce the ground vibration, but to construct the trench in the rock mass is not easy. Various line drilling methods have been tried to replace the trenching. In this study, UDEC was applied to simulate the screening effect of drilling holes in 2 dimensional ground model. Field measurement was conducted and compared to numerical analysis.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.235-239
• /
• 2000

Vibration screening trench is very effective to reduce the ground vibration, but to construct the trench in the rock mass is not easy. Various line drilling methods have been tried to replace the trenching. In this study, UDEC was applied to simulate the screening effect of drilling hopes in 2 dimensional ground model. Field measurement was conducted and compared to numerical analysis.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.97-102
• /
• 1999

Structure-borne noise is an important aspect to consider during the design and development of a vehicle. In this work. it was desired to identify the primary paths associated with structure-borne noise generated from the engine and front suspension. An experimental source-path-receiver model was used to characterize the system. A variety of primary sources such as engine. tires or exhaust system generate vibrations of the inner surfaces of the passenger compartment of a vehicle which subsequently radiate noise. The source was characterized by the force acting at the engine-to-body interface. and the path was characterized by pressure over force FRF's. The excitation forces were indirectly determined using dynamic stiffness of rubber mount or the system accelerance matrix. Through these analysis, path contribution diagram which is well expressed primary noise path is obtained.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.793-794
• /
• 2011

• Journal of the Korean Geosynthetics Society
• /
• v.5 no.2
• /
• pp.23-30
• /
• 2006

This paper aims at investigating the material and dimensions of a wall barrier such as installation depth, thickness, and distance from vibration source by means of finite element method (FEM). In this study, various materials such as concrete, EPS, and steel were adopted. The results showed that the efficiency of a wall barrier appears to be more dependent on installation depth than thickness. In addition, a concrete wall barrier is less efficient than any other wall barrier. In contrast, EPS wall barriers seem to be much sensitive to the wall thickness than the depth.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.631-640
• /
• 2009

In this paper, Numerical analysis was conducted to study on the reduction of ground vibration level induced by subway train. The analytical results indicated that the soil properties were the predominant factor affecting the ground vibration when the tunnel was located in the soil layer. On the other hand, the rock properties were the predominant one when the tunnel was located in the rock layer. The effects of the angle between the vertical line of vibration source and the receive point on the reduction of vibration level were also evaluated. There were little difference in the reduction of vibration level when the receive point was located within $30^{\circ}$. The vibration level, however, rapidly decreased when the angle between the two points was larger than $40^{\circ}$.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.223-230
• /
• 1995

본 연구에서는 선박소음해석을 수행하기 위한 기초작업으로서 실선 선박모델을 크게 3가지 경우로 구분하여 모델링 하였으며, SEA법을 적용하여 고체소음의 전달손실을 이론적으로 예측할 수 있는 방법을 제시하였으며, 또한 STL을 도입하여 각 요소간의 에너지 흐름 및 구성판요소의 재료별 방진효과를 알아보았다. 이 방법의 결과 다음과 같은 결론을 얻을 수 있었다. 1) 내장판의 종류에 따른 전달특성은 고주파 대역에서는 plywood, 저주파 대 역에서는 rockwool이 높은 손실값을 보였으며, glasswool은 전 주파수 대역에서 고른 손실값을 가짐을 확인하였다. 2) 기진원으로부터의 거리가 멀어짐에 따라 내장판의 효과가 크게 나타나며, 기진원의 근방 요소에서는 내장판의 효과보다는 강판의 두께의 영향이 두드 러짐을 알 수 있었다. 3) 내장판 요소중 plywood의 방진효과가 가장 크게 나타남을 알 수 있었다. 4) 본 SEA법에 의한 연구에서는 구성 판요소의 재질과 두께에 따른 고쳇음 의 전달특성을 이론적으로 해석하였으며, 차후 실험을 통한 검증이 요구되어 진다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.166-171
• /
• 2001

An electric drill is a handy tool used in a machine shop, which consists of motor, gear, bearing, shaft, and case, i.e., a gear driving system. Low level vibration and noise of the electric drill can bring the assurance of the quality and reliability of the machine. The vibration sources of the electric drill should be investigated for the reduction of the vibration and noise of the system. Through the experiments in a laboratory and the various signal processing procedure for the measured vibration and sound signals, the characteristics of the vibration and noise of the electric drill are investigated. And its propagation path is sought using partial coherence technique.