• Journal of Korean Society of Forest Science
• /
• v.61 no.1
• /
• pp.1-7
• /
• 1983

In the estimation of diameter distribution in a stand using Weibull distribution function, the calculation method of experimental distribution was presented in previous paper. This study was to estimate the diameter distribution of Korean pine stands by Weibull distribution which represents Gamma function, with mean diameter and mean basal-area diameter of the random sample trees. The results obtained fitted the diameter distribution in experimental stands. Thus, this method appears to be used for the estimation of diameter distribution in a stand as well as for the analysis and prediction of stand construction for the future.

• Tunnel and Underground Space
• /
• v.21 no.5
• /
• pp.386-393
• /
• 2011

This study suggests an algorithm for estimating joint diameter distribution in rock mass from the joint trace length distribution around a circular tunnel. For estimating the joint diameter distribution, the concept of Joint Center Volume (JCV) suggested by Song. (2005) was applied and the calculation method of JCV for the cylindrical window survey was developed by using the complete survey method. The estimated joint diameter distribution was verified against the original joint diameter distribution by Monte-Carlo simulation. It was observed that the estimated joint diameter distribution was converged to the original joint diameter distribution with less than 20% of error.

• Journal of Korean Society of Forest Science
• /
• v.59 no.1
• /
• pp.46-50
• /
• 1983

Estimation of stand diameter distribution by using Weibull distribution, and then the result is tested by Kolomogorov-Smirnov method expresses very fine fitted.

• Tunnel and Underground Space
• /
• v.15 no.2 s.55
• /
• pp.137-144
• /
• 2005

An estimation technique of the joint diameter distribution using the least square method is suggested. When utilizing the technique by Song and Lee, the diameter distribution would be obtained only from the trace length distribution defined in an infinite window after the trace length distribution is estimated from the contained trace length distribution. With the new technique, however, the diameter distribution can be directly obtained from the sample histogram of the contained trace lengths. Compared with the previous technique, it shows a more accurate result for small sizes of joint samples and provides the joint geometry parameter of volumetric frequency. Verification of this new technique was completed by using Monte Carlo simulations.

• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.176-183
• /
• 2001

Loblolly pine (Pinus taeda L.) is the most economically important timber producing species in the southern United States. Much attention has been given to predicting diameter distributions for the solution of multiple-product yield estimates. The three-parameter Weibull diameter distribution yield prediction systems were developed for loblolly pine plantations. A parameter recovery procedure for the Weibull distribution function based on four percentile equations was applied to develop diameter distribution yield prediction models. Four percentiles (0th, 25th, 50th, 95th) of the cumulative diameter distribution were predicted as a function of quadratic mean diameter. Individual tree height prediction equations were developed for the calculation of yields by diameter class. By using individual tree content prediction equations, expected yield by diameter class can be computed. To reduce rounding-off errors, the Weibull cumulative upper bound limit difference procedure applied in this study shows slightly better results compared with upper and lower bound procedure applied in the past studies. To evaluate this system, the predicted diameter distributions were tested against the observed diameter distributions using the Kolmogorov-Smirnov two sample test at the ${\alpha}$=0.05 level to check if any significant differences existed. Statistically, no significant differences were detected based on the data from 516 evaluation data sets. This diameter distribution yield prediction system will be useful in loblolly pine stand structure modeling, in updating forest inventories, and in evaluating investment opportunities.

• Journal of Korean Society of Forest Science
• /
• v.80 no.4
• /
• pp.420-426
• /
• 1991

This study was conducted to provide fundamental information to make rational management planning in eastern seacoast forest, mainly composed of black pine (Pinus Thunbergii), Kangweon Province. Diameter distribution was estimated by the method of Weibull distribution. The results were as fallows ; 1. Average diameter in the eastern seacoast forests of Kangweon Province was 10.3cm, and the average D. B. H, of 16 study sites ranged from 6.9 to 14.6cm. 2. Parameters of the Weibull distribution were estimated in each study sites and the estimated parameters of the all study forests were a=5, b=5.6997 and c=1.4079. 3. Tested by Kolmogorov-Smirnov method for the significant differences between actual and estimated diameter distribution, the result showed that estimated values were well fitted to the actual ones at 5% significance level.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.250-250
• /
• 2013

단일벽 탄소나노튜브(Single-walled nanotubes, SWNTs)는 나노스케일의 크기와 우수한 물성으로 인하여, 전자, 에너지, 바이오 분야로의 응용이 기대되고 있다. 특히 SWNTs의 직경을 제어하게 되면 튜브의 전도성 제어가 훨씬 수월하게 되어, 차세대 나노전자소자의 실현을 앞당길 수 있으며 이러한 이유로 많은 연구들이 현재 행해지고 있다. SWNTs의 직경제어 합성을 위해서는 현재 열화학기상증착법(Thermal chemical vapor deposition; TCVD)이 가장 일반적으로 이용되고 있으며, 합성 촉매와 합성되는 튜브의 직경과의 크기 연관성이 알려진 후로는, 촉매의 크기를 제어하여 SWNTs의 직경을 제어하고자 하는 연구들이 활발하게 보고되고 있다. 특히, 촉매 나노입자의 직경이 1~2 nm 이하로 감소될 경우, SWNTs의 직경 분포가 어떻게 변화할 것인지가 최근 가장 중요한 관심사로 남아 있으나, 이러한 크기의 금속입자는 나노입자의 융점저하 현상이 발현되는 영역이므로, SWNTs의 합성온도 영역에서 촉매 금속입자는 반액체(Semi-liquid) 상태로 존재할 것으로 추측하고 있다. 본 연구에서는 고온의 SWNTs 합성환경에서 금속나노촉매의 유동성을 제한하기 위하여 나노사이즈의 기공이 규칙적으로 정렬된 다공성 물질인 제올라이트를 촉매담지체로 이용하였고, 이 때 다양한 합성변수가 SWNTs의 직경에 미치는 영향을 살펴보고자 하였다. SWNTs의 합성을 위해 실리콘 산화막 기판 위에 제올라이트를 도포한 후, 합성 촉매로서 전자빔증발법을 통하여 수 ${\AA}$에서 수 nm 두께의 철 박막을 증착하였다. 합성은 메탄을 원료가스로 하여 TCVD법으로 실시하였다. 주요변수로는 제올라이트 종류, 증착하는 철 박막의 두께, 합성온도를 설정하였으며, 이에 따라 합성된 SWNTs의 합성수율 및 직경분포의 변화를 체계적으로 살펴보았다. SWNTs의 전체적인 합성수율의 변화는 SEM 관찰결과를 이용하였으며, SWNTs의 직경은 AFM 관찰 및 Raman 스펙트럼의 분석에서 도출하였다. 실험결과, 제올라이트 종류에 따라서는 명확한 튜브직경 분포의 변화 없이 비교적 좁은 직경분포를 갖는 SWNTs가 합성되었으며, 합성온도가 $850^{\circ}C$ 이하로 감소되면 합성수율이 현저히 감소되는 것을 알 수 있었다. 촉매박막의 두께가 1 nm 이상인 경우에서는 직경 5 nm 전후의 나노입자가 형성되었으며, 이때 SWNTs의 합성수율은 높았으나 다양한 직경의 튜브가 합성이 된 것을 확인할 수 있었다. 반면, 촉매입자의 크기가 2 nm 이하에서는 합성수율은 다소 저하되었으나, SWNTs의 직경분포의 폭이 상대적으로 훨씬 좁아지는 것을 알 수 있었다. 추후, 극미세 촉매와 저온합성 환경에서의 합성수율 향상을 위한 합성공정의 개량이 지속적으로 요구된다.

• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.33-39
• /
• 2011

This study was conducted to distribution characteristic of root diameter class between natural and planted stands of one-age class in Pinus densiflora for. eracta in Gangwon. Root development presented that 0.5-2.0 mm diameter class was large part in total root number and length but 0.5-2.0 mm diameter class have a low distribution in each stand. Below 5.0 mm diameter class between natural and planted stands observed outstanding natural stand more than planted stand, but reverse over 5.0 mm diameter class. Root development depending on soil level of vertical and horizontal was presented various natural stand more than planted stand because root distribution of planted stand was concentrated low soil level in 10 cm of soil depth and 20 cm of soil horizontal layer. We can understand that the root distribution presented different between natural and planted stand, therefore this result can used as a basic information for correct of outplanting.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.37-47
• /
• 2018

The objective of this study was to analyze the influences of forest management activity on the diameter distribution of Larix kaempferi Carriere stands in South Korea. We used 232 managed stands data, 47 unmanaged stands data of National Forest Inventory for this study. We employed the Weibull distribution function for estimating diameter based on percentiles and parameter recovery method. The results revealed that the average diameter breast height movements and growth of tree in the managed stands higher than the unmanaged stands according to the scenario: age, site index, and tree density change. The finding shows the percentage of the total amount of large class diameter was also high in the managed stands. The results of this study could be apply for the estimation of multi-products of timbers per diameter classes and stand structure development for Larix kaempferi Carriere stands in South Korea.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.311-318
• /
• 2022

We conducted this study to derive the site index, which is a criterion for the planting of Robinia pseudoacacia, a honey plant, and to investigate the diameter distribution change by derived site index. We applied the Chapman-Richards equation model to estimate the site index of the Robinia pseudoacacia stand. The site index was distributed within the range of 16-22 when the base age was 30 years. The fitness index of the site index estimation model was low, but we judged that there was no problem in the application because the residual distribution of the equation had not shifted to one side. We used the Weibull diameter distribution function to determine the diameter distribution of the Robinia pseudoacacia stand by site index. We used the mean diameter and the dominant tree height as independent variables to present the diameter distribution, and our analysis procedure was to estimate and recover the parameters of the Weibull diameter distribution function. We used the mean diameter and the dominant tree height of the Robinia pseudoacacia stand to show distribution by diameter class, and the fitness index for dbh distribution estimation was about 80.5%. As a result of schematizing the diameter distribution by site indices as a 30-year-old, we found that the higher the site index, the more the curve of the diameter distribution moved to the right. This suggests that if the plantation were to be established in a high site index stand, considering the suitable trees on the site, the growth of Robinia pseudoacacia woul d become active, and not onl y the production of wood but al so the production of honey would increase. We therefore anticipate that the site index classification table and curve of this Robinia pseudoacacia stand will become the standard for decision making in the plantation and management of this tree.