• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.4
• /
• pp.295-301
• /
• 2016

The out-of-squareness is one of the error sources that affect the positioning accuracy of machine tools and coordinate measuring machines. Laser interferometer is widely used to measure the position and angular errors, and can measure the squareness using an optical square. However, the squareness measurement using the laser interferometer is difficult, as compared to other errors due to complicated optics setup and Abbe's error occurrence. The effect of out-of-squareness mainly appears at the face-diagonal of the movable plane. The diagonal displacements are also affected by the position dependent geometric errors. In this study, the squareness estimation techniques via diagonal displacement measurement using the laser interferometer without an optical square were proposed. For accurate estimation and measurement time reduction, the errors selected from proposed discriminant were measured. Discrepancy between the proposed technique with the laser interferometer (with an optical square) result was $0.6{\mu}rad$.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.485-488
• /
• 2006

본 논문에서는 두 대의 카메라를 직각으로 배치하여 얻은 동영상을 통해 3차원 인체 동작을 추정하는 방법을 제안한다. 제안된 시스템은 실루엣에서 전역 특징과 지역 특징을 추출하여 이 특징들을 정적 특징과 동적 특징으로 다시 나눈다. 모든 실루엣 특징은 RBF 신경망의 입력으로 이용되어 동작을 분류한다. 본 논문에서 제안된 신경망 동작 추정 시스템은 유아들의 동작 교육에 적용되었다. 동작 교육을 위해 제시되는 기본 동작은 걷기, 뛰기, 앙감질 등의 이동 동작과 구부리기, 뻗기, 균형잡기, 회전하기 등 비 이동 동작으로 구분되고, 이 7 가지 기본 동작은 성공적으로 추정되었다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.5-6
• /
• 2010

In this study, assuming that there is a diagonal uniaxial compression field in combination with triangular homogeneous stress fields in the cracked concrete wall and a tensile stress of a steel plate occurs in the perpendicular to the direction of the diagonal compression field, an ultimate shear strength of a slender composite shear wall is estimated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1259-1265
• /
• 1997

We investigate depth measurement error of a range finder based on triangulation method. Geometric analysis resulted in intuitive understanding of the error sensitivity. We show that the depth error is propostional to the distance between the object andthe camera. The measurement value has the highest accuracy when the line connecting the focal point of the camera and the object is perpendicular to the line joining the object and the light source of herange finder. Also we analyze the error using a perturbation method and verify that the results are identical through an experiment.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.589-598
• /
• 2006

The rectilinear Steiner tree problem is to find a minimum-length rectilinear interconnection of a set of terminals in the plane. It is well known that the solution to this problem will be the minimal spanning tree (MST) on some set Steiner points. A hybrid evolutionary algorithm is introduced based upon the Prim algorithm. The Prim algorithm for the fitness evaluation requires heavy calculation time. The fitness value of parents is inherited to their child and the fitness value of child is estimated by the inherited structure of tree. We introduce four alternative evolutionary algorithms, Experiment result shows that the calculation time is reduced to 25% without loosing the solution quality by using the fitness estimation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.170-175
• /
• 2018

For the seismic performance, it is necessary to prevent the destruction of the expansion joint device due to the appropriate deformation of the expansion joint device due to the seismic force. Recently, the hinge is installed on the fingering of the expansion joint device in Korea, New products are being developed. In this paper, we have experimentally evaluated the real scale resistance of the expansion joints with rotational finger joints against load at right angle to the bridge axis. Experimental results show that the maximum horizontal displacement is about 21.1mm for conventional stretch joints and 51.00mm for seismic stretch joints. It is presumed that the existing expansion joint test specimen is resistant to the load in a direction perpendicular to the throat axis, and then the bending and shear deformation of the finger are excessively generated and the fracture phenomenon is likely to occur. On the other hand, in the case of the seismic expansion joint, the deformation of the load due to the load is absorbed by the hinge of the finger with respect to the load in the direction perpendicular to the throat, so that only horizontal deformation in the direction of load action.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1221-1225
• /
• 2006

문산천 하구와 임진강 장단반도 부근은 일반 하천과는 달리 특이한 하도특성을 지니는 구간이다. 문산천의 종단특성은 전형적인 상시 퇴적구간이다. 유사레짐에서도 실제 문산천 하구와 임진강 반구정 구간의 흐름특성 또한 감조구간으로서 밀물, 썰물에 민감하게 작용하여 거시적으로 유사이동이 정체성을 띠는 구간인 것이 확인되었다. 평면특성으로서는 임진강 반구정 구간에서 만곡하도 구간으로서 그 만곡 정도가 매우 크며(곡률 반경 709 m), 이에 따른 양안의 수위차가 실제 약 30 cm 이상 발생하는 것으로 평가되었다. 그리고 문산천 하구역의 하상경사가 1/5,400으로 임진강의 1/3,000보다 완만하다. 문산천 합류부 부근의 하상재료를 살펴 볼때도 임진강보다 문산천에서 더 작은 입경이 비교적 널리 분포하고 있다. 따라서, 홍수시 특히 조석이 창조기나 정체기에 임진강으로 직각 유입하는 형태를 취하고 있는 문산천 하구에서 문산천 홍수량이 유하하지 못하여 배수영향이 가중되고 임진강의 우안이 상대적으로 높은 홍수위가 역류하고 있다고 추정되었다. 이와 같은 현상들은 평균하상고의 변화에서도 나타나듯이 문산천 하구에서 외견상 하구막힘과 같은 사주 형태가 발달하는 양상에서도 찾을 수 있었다. 결국 문산천 하구에서 수위 및 하상변동량 저감을 위한 궁극적인 대책으로서 새로운 문산천 방수로 건설 및 현 문산천 하구에서의 배수기장 도입이 필요한 것으로 분석 되었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.1
• /
• pp.65-76
• /
• 2001

본 연구의 목적은 평판의 모서리 둔각이 135도까지를 갖는 재료적 비선형 경사평판을 해석하기 위해 C°-계층적 평판요소를 개발하는 것이다. 기하학적 변환을 통해 경사진 경계조건은 직각좌표계의 좌표변환을 이용하여 해결할 수 있다. 여기서, 경사경계는 경사진 변 전체 또는 경사교량의 교좌위치와 관련된 몇 개의 선택지점만을 고려할 수 있게 하였다. 이 목적을 위해 경사교량의 교좌장치의 이동방향을 설명할 수 있도록 1차 전단변형을 갖는 Reissner/Mindlin 평판이론에 기초를 둔 5-자유도 경사평판요소가 정식화되었다. 한편, 평판의 극한내하력을 추정하기 위해 von-Mises 항복기준에 기초를 둔 소성유동법칙을 갖는 증분소성이론이 채택되었다. 또한, ADINA 소프트웨어에 의한 h-version 모델과 제안된 p-version 모델을 사용하여 경사각, 경계조건과 하중의 변화에 따른 영향을 조사하였다. 해석결과는 이론값과 문헌에 보고된 수치해석값과 비교되었다. 자유도 수에 따른 정확도를 비교기준으로 한다면, 본 연구에서 제안된 해석모델은 지금까지 개발된 가장 효율적 도구의 하나라고 할 수 있다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.4
• /
• pp.293-306
• /
• 1989

In this paper, the models and characteristics of multipath propagation in an urban environment are described. Three propagation models(a random model, a ray model and a method of estimating time delay is proposed based on the envelope correlation between two radio frequencies. It is shown on the basis of laboratory simulation and field tests that the simple two-ray model is an adequate model for the fundamental study of the multipath propagation characteristic of the mobile radiowave and the estimating time delays of multipath-propagated waves in an urban area.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.96-107
• /
• 2011

Recently, studies of 3D HDTV broadcasting technology have been processed actively. Korea is making efforts to modify Advanced Television Systems Committee (ATSC) 8-Vestigial Side Band (8-VSB) systems for terrestrial 3D HDTV broadcasting services. We intend to adopt a new frame structure to use PN (Pseudo-Noise) sequence as frame header, and VSB modulation. PN sequence is used to recover carrier freqeuncy offset, carrier phase error. In this paper, we will describe this system as the modified ATSC systems. The receiver of the modified ATSC system should be able to estimate and recover carrier frequency offset exactly. A existing ATSC systems inserts pilot to recover carrier frequency offset, on the other hand the modified ATSC systems use PN sequence to recovery carrier frequency offset without the use of pilot. In this paper, we introduce carrier frequency recovery (CFR) scheme for the modified ATSC systems. The proposed CFR scheme is composed of coarse CFR scheme using Fitz algorithm and fine CFR scheme using a simple PN sequence correlation algorithm. And, the symbol information of QAM modulated signal is contained in both In-phase (I)channel and Quadrature-phase (Q)channel. However the symbol information of VSB modulated signal is contained in I channel, and Q channel is just Hilbert transform of I channel. For the reason, VSB modulated symbols can not have fixed phase like QAM modulated symbols, and VSB modulated symbols is more sensitive to carrier frequency offset. Therefore we perform phase correction of received PN sequence to improve performance.