• 제목/요약/키워드: 지티엘

검색결과 10건 처리시간 0.028초

현장 GPR 탐사자료와 지하공간통합지도 상호위치 정확도 분석에 관한 연구 (A Study on the Analysis of Positional Accuracy between the GPR Survey Data and Underground Space Integration Map)

  • 송석진;조해용;한담혜;김성길
    • 한국지리정보학회지
    • /
    • 제23권4호
    • /
    • pp.208-216
    • /
    • 2020
  • 최근의 도심지에서 발생하고 있는 지반함몰 및 침하, 노후 지하시설물 파손 등의 지하 안전에 관한 이슈가 증가하고 있어 보다 정확한 지하시설물의 관리 필요성이 대두되고 있다. 이에 본 연구에서는 현장에서 취득하는 GPR 탐사 성과로부터 취득한 지하시설물 공간정보와 지하공간통합지도의 공간정보를 상호 비교하는 기법을 도출하였다. 본 연구를 통해 개발한 지하공간통합지도 연계 현장활용 서비스 프로토타입 프로그램을 사용하여 강남역 주변 일부 구간에 대하여 현장 활용성 검증을 위한 GPR 탐사성과와 지하공간통합지도의 위치 정보를 비교한 결과 최대 0.879m, 최소 0.101m, 평균 오차는 0.625m로 나타났다. GPR탐사 성과의 정확도가 보장될 경우 지하공간통합지도의 위치정확도 개선에 활용할 수 있을 것으로 판단된다.

업계 소식

  • 한국계육협회
    • 월간 닭고기
    • /
    • 통권131호
    • /
    • pp.38-42
    • /
    • 2006
  • 바이엘코리아(주)/ 네오바이오(주)/ (주)우성사료/ (주)삼지약품/ CJ Feed/ (주)지티/ (주)코스프/ (주)두산 백두사료/ (주)코미팜

  • PDF

3차원 지하공간통합지도를 활용한 지하시설물 현장 측량 시스템 구축 및 적용 (Constrution and Application of Underground Facilities Survey System using the 3D Integration Map of Underground Geospatial Information)

  • 송석진;조해용;허현민;김성길
    • 한국지리정보학회지
    • /
    • 제24권4호
    • /
    • pp.164-173
    • /
    • 2021
  • 최근 도심지의 지반함몰 및 침하, 노후 지하시설물 파손 등 지하공간에 대한 안전 이슈가 증가하고 있어 지하시설물의 정확한 관리가 더욱 요구되고 있다. 이에 본 연구에서는 현장에서 취득하는 지하시설물 실시간 측량 데이터 또는 지하시설물 탐사 후 현장 측량으로 취득한 지하시설물 측량 데이터를 지하공간통합지도 상에 가시화하고, 측량성과로 변환하는 기능을 개발하였다. 또한, 본 연구를 통해 개발한 지하공간통합지도 연계 현장 측량 성과 활용 기능을 사용하여 서울시 은평구 상수관로 매설공사 현장에서 토탈스테이션으로 획득한 측량성과를 지하공간통합지도상에 가시화 하고, 공간정보 성과파일로 변환 및 지하공간통합지도 모바일 센터로 전송하는 현장실증을 수행하였다. 이를 바탕으로 지하공간통합지도가 구축된 지역에서 측량성과를 활용하는 작업 절차를 검증할 수 있었으며, 향후 개선 방향을 검토할 수 있었다.

GTL/바이오디젤 혼합 연료의 연소 및 배기배출물 특성에 관한 실험적 연구 (An Experimental Study on the Combustion and Emission Characteristics of Blends of GTL / Biodiesel in Diesel Engine)

  • 문건필;이용규;최교남;정동수
    • 한국자동차공학회논문집
    • /
    • 제17권5호
    • /
    • pp.39-45
    • /
    • 2009
  • An experimental research with 2.0 liter 4-cylinder turbocharged diesel engine was carried out to investigate the combustion and emission characteristics for various alternative fuels. The conventional diesel fuel, neat GTL, blends of 80% of GTL and 20% of biodiesel derived from waste cooking oil are utilized without any modification of engine hardware and ECU data. For GTL and blends of GTL/biodiesel fuel, the ignition delay decreased at the same operating conditions, and overall combustion duration increased slightly. Also, the peak cylinder pressure increased for blends of GTL/biodiesel compared to diesel and GTL fuel. THC and CO emissions with blends of GTL/biodiesel compared to other fuels decreased for the low and middle load conditions. But NOx emission increased due to oxygen content in biodiesel. The number concentrations of PM are higher for blends of GTL/biodiesel than other test fuels in the nucleation mode, while it had an opposite tendency in the accumulation mode, which implies more reduction of PM for blends of GTL/biodiesel on the base of mass concentration.

디젤엔진에서 디젤, GTL, 바이오디젤의 혼합유의 배기배출물 특성에 관한 실험적 연구 (Experimental Study on the Emission Characteristics of Diesel, GTL, and their Blends with Biodiesel in a Diesel Engine)

  • 이용규;문건필;정동수
    • 한국자동차공학회논문집
    • /
    • 제18권4호
    • /
    • pp.140-146
    • /
    • 2010
  • An experimental study was carried out to investigate the emission characteristics for various alternative fuels in a 2.0 liter 4-cylinder turbo-charged diesel engine. The conventional diesel fuel, neat GTL (Gas to Liquid), blends of diesel and biodiesel(BD20), and blends of GTL and biodiesel(G+BD20 and G+BD40) were applied, and their emission characteristics were compared at various steady-state engine operating conditions. A noticeable reduction of exhaust emissions compared to conventional diesel fuel, except for NOx emission, was observed for G+BD40, where there is a maximum 30% averaged reduction for gaseous emissions (THC and CO) and 70% for PM mass concentrations. When comparing PM size distributions for biodiesel blended fuels, the PM number concentration in accumulation mode, where the diameter of PM is greater than 50 nm, decreased due to additional oxygen content in the biodiesel fuel; in nucleation mode, where the diameter of PM is less than 50nm, there was a slight increase or decrease in the PM number concentration depending on the amount of oxygen available in the combustion chamber.

디젤 엔진에서 GTL(Gas to Liquid) 연료의 배출물 특성에 관한 연구 (Emission Characteristics of GTL(Gas to Liquid) Fuel in Diesel Engine)

  • 이용규;문건필;최교남;정동수;김병준;차경옥
    • 한국자동차공학회논문집
    • /
    • 제16권5호
    • /
    • pp.84-91
    • /
    • 2008
  • Due to increasing need for better emission characteristics and lower fuel consumption rate in automotive engines, alternative fuels are drawing more attentions recently. The GTL (gas to liquid) is the one of most favored candidates. In this study, emission characteristics are compared between diesel and GTL fuel in commercial 2.0 liter diesel engine and vehicle with CRDi(Common Rail Direct injection) system. The effects of injection timings on emission and fuel consumption rate are compared at various engine speeds and loads. Noticeable reduction in HC, CO and PM emissions are observed due to higher cetane number and low sulfur and aromatic contents in GTL. On the trade-off curve of NOx and PM(Particulate matter) GTL showed much more benefits than diesel, where about 30% of PM mass decreased at the same operating conditions. On CVS 75 mode test in vehicle, GTL showed an excellent emission enhancement, in which 50% of HC, 21% of PM, and 12% of NOx engine-out emissions are decreased compared to ULSD(Ultra low sulfur diesel) fuel.

IEEE 802.15.4에서 GTS의 확장개념에 관한 연구 (A study on the Implementation Extended Concept of GTS in IEEE 802.15.4)

  • 전동근
    • 한국전자통신학회논문지
    • /
    • 제10권3호
    • /
    • pp.319-325
    • /
    • 2015
  • 무선 통신 기술에 있어서 눈부신 발전은 서로 멀리에 있는 사람들 간에 통신을 가능케 했다. 최근에는, 저비용과 단순한 하드웨어를 기반으로 하는 무선 시스템을 이용한 근거리 음성커뮤니케이션의 필요성이 급속히 대두되고 있다. 그러나, 이러한 애플리케이션은 작은 지역에서 같은 무선 채널로 다중 이용자(multi-users)들이 통신하는 것을 요구하기 때문에, 현존하는 음성 기술들은 이러한 애플리케이션들에 직접적으로 적용하는 것은 적절치가 않다. 본 논문에서는 다중 이용자 음성통신을 가능케 하는 참신한 아이디어를 제안하고자 한다 특히, 단거리 무선 해결책으로서, 저전력, 저비용을 바탕으로 한 IEEE 802. 15. 4를 이용한다. 그러나, 원래 그 표준은 음성 통신을 위해 개발된 것은 아니기 때문에, 음성 통신에 적당하도록 GTS의 확장 개념을 이용함으로써 원래의 운용계획을 확장한다. 제안된 운용계획의 용량과 타당성은 다양한 음성 압축비에서 양적 분석을 통해 평가된다.

고압수소 저장용기의 노즐 각도 및 길이/직경비에 따른 열적 특성 연구 (A Study on the Thermal Characteristics of High Pressure Hydrogen Storage Tank according to Nozzle Angle and Length/Diameter Ratio)

  • 윤정환;권준영;전경숙;오진식;오승준
    • 한국수소및신에너지학회논문집
    • /
    • 제34권5호
    • /
    • pp.431-438
    • /
    • 2023
  • Recently, study on hydrogen is being conducted due to environmental pollution and fossil fuel depletion. High-pressure gas hydrogen commonly used is applied to vehicle and tube trailers. In particular, high-pressure hydrogen storage tank for vehicles must comply with the guidelines stipulated in SAE J2601. There is a charging temperature limitation condition for the safety of the storage tank material. In this study, numerical analysis method were verified based on previous studies and the nozzle angle was changed for thermal management to analyze the increase in forced convection effect and energy uniformity due to the promotion of circulation flow. The previously applied high-pressure hydrogen storage tank has a length/diameter ratio of about 2.4 and was analyzed by comparing the length/diameter ratio with 8. As a result, the circulation flow of hydrogen flowing into the high-pressure hydrogen storage tank is promoted at a nozzle angle of 30° than the straight nozzle and accordingly, the effect of suppressing temperature rise by energy uniformity and forced convection was confirmed.

흙막이 벽체의 굴착 폭과 변형특성에 관한 수치해석적 연구 (Numerical Investigations on the Excavation Width and Property of Deformation of Earth Retaining Wall)

  • 박춘식;정성민
    • 한국지반공학회논문집
    • /
    • 제36권12호
    • /
    • pp.57-68
    • /
    • 2020
  • 흙막이 벽체의 해석 시 일반적으로 적용되는 2차원 해석의 경우 굴착 폭이 작으면 토압에 의한 상호간섭이 발생하며, 그 영향으로 굴착 폭이 작은 구간에서는 2차원 해석 시 흙막이 벽체의 수평변위에 대한 신뢰성 확보가 어렵다. 따라서 본 연구에서는 2차원 해석 시 토압에 의한 상호간섭 발생의 범위가 되는 굴착 폭의 경계를 확인하기 위하여 H-pile 토류벽체에 대하여 점성토, 사질토, 사질토 및 풍화암의 지층조건에서 다양한 조건의 굴착 깊이(H)와 굴착 폭(B)에 대하여 2차원 및 3차원 유한요소해석을 수행하여 각 조건에 따른 굴착 폭과 수평변위의 관계를 연구하였다. 연구결과 수평 변위가 비교적 크게 발생하는 점성토에서만 굴착 폭에 따른 해석적 경계를 뚜렷하게 구분할 수 있었고, 그 내용은 굴착규모(B/H) 2.0 이하, 굴착 깊이 10m 이하에서 굴착 폭이 12m보다 작은 경우와 굴착 깊이 10m 이상에서 굴착 폭이 24m보다 작은 경우는 실제 거동과 유사한 3차원 유한요소해석을 하는 것이 합리적이며, 굴착규모(B/H) 2.0 이상, 굴착 깊이 10m 이하에서 굴착 폭이 12m보다 큰 경우와 굴착 깊이 10m 이상에서 굴착 폭이 24m보다 큰 경우는 2차원 유한요소해석을 하여도 무방하다는 결론을 얻었다.

페놀수지 및 에틸렌 글리콜을 첨가한 유리질 카본 코팅층의 물성 제어 (Morphology control of glassy carbon coating layer to additive ethylene glycol and phenolic resin)

  • 주상현;주영준;이혁준;심영진;박동진;조광연
    • 한국결정성장학회지
    • /
    • 제32권3호
    • /
    • pp.89-95
    • /
    • 2022
  • 본 연구에서는 페놀수지를 사용하여 흑연표면에 유리질 카본 코팅을 진행하였다. 코팅액은 균일한 표면을 가지는 유리질 카본 코팅층 형성을 위해 페놀수지와 경화제, 희석제, 첨가제 등을 혼합하였다. 코팅된 페놀수지는 25~60℃에서 건조 100~200℃에서 경화 500~1,500℃에서 열처리하여 유리질 카본으로 전환하였다. 유리질 카본의 특성 분석을 위해 FTIR, XRD, SEM 분석, 밀도/기공율/접촉각 측정을 진행하였다. 유리질 카본 형성에 있어 최적 온도는 약 1,000℃로 확인되었다. 그리고 첨가제의 함량이 높아질수록 코팅 표면의 결함감소, 기공율 감소, 접촉각 증가, 밀도 증가 등의 효과를 보였다. 첨가제를 통한 유리질 카본 코팅층 형성 방법은 흑연 코팅 및 다른 분야에 적용이 가능할 것으로 기대된다.