Journal of Hydrogen and New Energy (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Thermal Characteristics of High Pressure Hydrogen Storage Tank according to Nozzle Angle and Length/Diameter Ratio

고압수소 저장용기의 노즐 각도 및 길이/직경비에 따른 열적 특성 연구

  • JEONG HWAN YOON (Technical Center for High-Performance Valves, Dong-A University) ;
  • JUNYEONG KWON (Technical Center for High-Performance Valves, Dong-A University) ;
  • KYUNG SOOK JEON (Technical Center for High-Performance Valves, Dong-A University) ;
  • JIN SIK OH (STG Co., Ltd.) ;
  • SEUNG JUN OH (Technical Center for High-Performance Valves, Dong-A University)
  • 윤정환 (동아대학교 고기능성밸브 기술지원센터) ;
  • 권준영 (동아대학교 고기능성밸브 기술지원센터) ;
  • 전경숙 (동아대학교 고기능성밸브 기술지원센터) ;
  • 오진식 ((주)에스지티) ;
  • 오승준 (동아대학교 고기능성밸브 기술지원센터)
  • Received : 2023.05.10
  • Accepted : 2023.10.11
  • Published : 2023.10.30
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, study on hydrogen is being conducted due to environmental pollution and fossil fuel depletion. High-pressure gas hydrogen commonly used is applied to vehicle and tube trailers. In particular, high-pressure hydrogen storage tank for vehicles must comply with the guidelines stipulated in SAE J2601. There is a charging temperature limitation condition for the safety of the storage tank material. In this study, numerical analysis method were verified based on previous studies and the nozzle angle was changed for thermal management to analyze the increase in forced convection effect and energy uniformity due to the promotion of circulation flow. The previously applied high-pressure hydrogen storage tank has a length/diameter ratio of about 2.4 and was analyzed by comparing the length/diameter ratio with 8. As a result, the circulation flow of hydrogen flowing into the high-pressure hydrogen storage tank is promoted at a nozzle angle of 30° than the straight nozzle and accordingly, the effect of suppressing temperature rise by energy uniformity and forced convection was confirmed.

Keywords

Acknowledgement

이 논문은 2022년도 정부(교육부)의 재원으로 한국연구재단 기초연구사업의 지원을 받아 수행된 연구임(No. 2022R1I1A1A01070576).

References

  1. J. K. Yeom and J. H. Yoon, "Study of behavior characteristics of emulsified fuels with evaporative field", Transactions of the Korean Society of Mechanical Engineers B, Vol. 39, No. 3, 2015, pp. 237-243, doi: https://doi.org/10.3795/KSMEB.2015.39.3.237.
  2. J. K. Yeom and J. H. Yoon, "Basic study of spray-behavior char acteristics of emulsified fuel", Transactions of the Korean Society of Mechanical Engineers B, Vol. 38, No. 9, 2014, pp. 763-771, doi: https://doi.org/10.3795/KSME-B.2014.38.9.763.
  3. M. Huo, S. Lin, H. Liu, and C. F. Lee, "Study on the spray and combustion characteristics of water-emulsified diesel", Fuel, Vol. 123, 2014, pp. 218-229, doi: https://doi.org/10.1016/j.fuel.2013.12.035.
  4. S. Y. No, "Application of bio-oils from lignocellulosic biomass to transportation, heat and power generation-A review", Renewable and Sustainable Energy Reviews, Vol. 40, 2014, pp. 1108-1125, doi: https://doi.org/10.1016/j.rser.2014.07.127.
  5. J. K. Yeom, S. H. Jung, and J. H. Yoon, "An experimental study on the application of oxygenated fuel to diesel engines", Fuel, Vol. 248, 2019, pp. 262-277, doi: https://doi.org/10.1016/j.fuel.2018.12.131.
  6. H. Lee, D. Oh, and Y. Seo, "Prediction of changes in filling time and temperature of hydrogen tank according to SOC of hydrogen", Journal of Hydrogen and New Energy, Vol. 31, No. 4, 2020, pp. 345-350, doi: https://doi.org/10.7316/KHNES.2020.31.4.345.
  7. B. H. Park, "Simulation of temperature behavior in hydrogen tank during refueling using cubic equations of state", Journal of Hydrogen and New Energy, Vol. 30, No. 5, 2019, pp. 385-394, doi: https://doi.org/10.7316/KHNES.2019.30.5.385.
  8. Ministry of Strategy and Finance, "2050 carbon neutral strategy of the Republic of Korea", Ministry of Strategy and Finance, 2020. Retrieved from https://www.korea.kr/archive/%20expDocView.do?docId=39241.
  9. J. Zheng, J. Guo, J. Yang, Y. Zhao, L. Zhao, X. Pan, J. Ma, and L. Zhang, "Experimental and numerical study on temperature rise within a 70 MPa type III cylinder during fast refueling", International Journal of Hydrogen Energy, Vol. 38, No. 25, 2013, pp. 10956-10962, doi: https://doi.org/10.1016/j.ijhydene.2013.02.053.
  10. J. Guo, J. Yang, Y. Zhao, X. Pan, L. Zhang, L. Zhao, and J. Zheng, "Investigations on temperature variation within a type III cylinder during the hydrogen gas cycling test", International Journal of Hydrogen Energy, Vol. 39, No. 25, 2014, pp. 13926-13934, doi: https://doi.org/10.1016/j.ijhydene.2014.03.097.
  11. N. de Muguel, R. O. Cebolla, B. Acosta, P. Moretto, F. Harskamp, and C. Bonato, "Compressed hydrogen tanks for onboard application: thermal behaviour during cycling", International Journal of Hydrogen Energy, Vol. 40, No. 19, 2015, pp. 6449-6458, doi: https://doi.org/10.1016/j.ijhydene.2015.03.035.
  12. C. P. Fowler, A. C. Orifici, and C. H. Wang, "A review of toroidal composite pressure vessel optimisation and damage tolerant design for high pressure gaseous fuel storage", International Journal of Hydrogen Energy, Vol. 41, No. 47, 2016, pp. 22067-22089, doi: https://doi.org/10.1016/j.ijhydene.2016.10.039.
  13. J. Zheng, X. Liu, P. Xu, P. Liu, Y. Zhao, and J. Yang, "Development of high pressure gaseous hydrogen storage technologies", International Journal of Hydrogen Energy, Vol. 37, No. 1, 2012, pp. 1048-1057, doi: https://doi.org/10.1016/j.ijhydene.2011.02.125.
  14. SAE International, "Fueling protocols for light duty gaseous hydrogen surface vehicles J2601_201612", SAE International, 2016. Retrieved from https://www.sae.org/standards/content/j2601_201612/.
  15. SAE International, "Fueling protocol for gaseous hydrogen powered heavy duty vehicles J2601/2_201409", SAE International, 2014. Retrieved from https://www.sae.org/standards/content/j2601/2_201409/.
  16. C. J. B. Dicken and W. Merida, "Modeling the transient temperature distribution within a hydrogen cylinder during refueling", Numerical Heat Transfer, Part A: Applications, Vol. 53, No. 7, 2007, pp. 685-708, doi: https://doi.org/10.1080/10407780701634383.
  17. A. Suryan, H. D. Kim, and T. Setoguchi, "Three dimensional numerical computations on the fast filling of a hydrogen tank under different conditions", International Journal of Hydrogen Energy, Vol. 37, No. 9, 2012, pp. 7600-7611, doi: https://doi.org/10.1016/j.ijhydene.2012.02.019.
  18. C. N. Ranong, S. Maus, J. Hapke, G. Fieg, and D. Wenger, "A pproach for the determination of heat transfer coefficients for filling processes of pressure vessels with compressed gaseous media", Heat Transfer Engineering , Vol. 32, No. 2, 2011, pp. 127-132, doi: https://doi.org/10.1080/01457631003769187.
  19. S. J. Oh, J. H. Yoon, J. K. Sook, J. K. Kim, J. H. Park, and J. Choi, "A study on the characteristics of temperature distribution related to geometry of tube in hydrogen storage vessel", Journal of Hydrogen and New Energy, Vol. 32, No. 4, 2021, pp. 205-211, doi: https://doi.org/10.7316/KHNES.2021.32.4.205.
  20. ANSYS, "2020 ANSYS FLUENT solver theory", ANSYS, 2020. Retrieved from https://ansyshelp.ansys.com/account/secured?returnurl=/Views/Secured/corp/v201/en/flu_th/flu_th.html?q=ansys%20fluent%20theory%20guide.