• Geophysics and Geophysical Exploration
• /
• v.17 no.2
• /
• pp.58-65
• /
• 2014

We studied the source mechanisms of very-long-period event recorded at seismic station WIZ near White Island Volcano, New Zealand on August 4, 2012. Since seismic data at only one station were available, we conducted moment tensor inversion using three simplified models (explosion, crack, and pipe models). To constrain the moment tensor solution of seismic event, we computed synthetic data for each model to compare with observed data. Type and orientation for the best model is a crack at a depth of 1600 m with a dip of $80^{\circ}NE$ and a strike of $N80^{\circ}W$. We interpret that a deep explosion may have opened a crack for gases to escape, and the upward gas flow triggered the surface explosions four hours later as confirmed by a webcam. The interpretation based on moment tensor inversion is consistent with previous studies of geochemical data of the volcanic island.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.121-130
• /
• 2008

Recently, we can see an increasing amount of dam damage or failure due to aging, earthquakes occurrence and unusual changes in weather. For this reason, dam safety is gaining more importance than ever before in terms of disaster management at a national level. Therefore, the government is trying to come up with an array of legal actions to secure consistent dam safety. Other dam management organizations are also taking various institutional and technical measures for the same purpose. In this study, Dam Safety Management System, KDSMS, has developed for consistent and efficient dam safety management. The KDSMS consists of dam and reservoir data, a hydrological information system, a field inspection and data management system, a instrumentation and monitoring system including earthquake monitoring, a field investigation and safety evaluation system, and a collective information system. The KDSMS is a kind of enterprise management system which has been developed to deal with safety management of each field, research center, and headquarter office and their correlation as well as detailed safety information management.

• Journal of the Korean Society for Railway
• /
• v.6 no.1
• /
• pp.6-13
• /
• 2003

최근 세계적인 기상이변으로 인한 재해가 갈수록 증가되고 있으며, 지구 온난화 등 이상기온에 따른 국지성 호우의 발생이 증가함에 따라 이러한 기상이변에 대한 철도재해를 미연에 방지할 수 있는 체계화된 방재시스템 구축이 절실히 요구되고 있다. 철도재해 발생시 경고체계와 우회로 부재에 따른 막대한 경제적 손실이 예상되고 있으므로 강우, 지진 등에 의한 재해 위험에 대해 실질적인 감시관리시스템과 운전규제기준의 재정립이 필요한 실정이다. 특히 국내에서 자주 발생하는 대표적인 재해원인으로는 태풍을 들 수 있는데 작년 8월 우리나라를 관통한 태풍 루사(RUSA)의 경우 일 최다 강우량 870.5mm, 1시간 최다강우량100.5mm를 기록하며, 총 48개소의 철도피해지역과 이로 인한 복구비용은 약 1,472억원 정도로 추정되었고, 경부선 등 전국 8개노선 48개소의 열차운행이 일시 중단된 바 있다. (중략)

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.3
• /
• pp.23-30
• /
• 2010

Seismic qualification (SQ) is required prior to the installation of safety related electrical cabinets in nuclear power plants (NPPs). Modal identification of the electrical equipment is one of the most significant steps to perform SQ, and is an essential process to construct a realistic analytical model. In this study, shaking table tests were conducted to identify a variation of the dynamic characteristics of a seismic monitoring system cabinet installed in NPPs according to the excitation level. Modal identification of the cabinet has been performed by a frequency domain decomposition method. The results of this study show that the dynamic properties of the cabinet are nonlinearly varied according to the excitation level and the specimen behaves significantly in a nonlinear manner under safe shutdown earthquake motion in Korea. The main sources of the nonlinear behavior of the specimen have been judged by friction forces and geometrical nonlinearity rather than material nonlinearity. The nonlinear variation of the dynamic characteristics of the electrical cabinet might be accepted as an important fact that should be considered during the SQ of safety related equipment.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.1
• /
• pp.1-12
• /
• 2012

The Baegdusan volcano is one of the most active volcanoes in northeastern Asia, and the 10th century eruption was the most voluminous eruption in the world in recent 2,000 years. During the period from 2002 to 2005, volcanic earthquakes and abnormal surface distortions by suspected subsurface magma intrusion beneath the volcano were observed in the Baegdusan area. Seismic activity has gradually increased with earthquake swarms during 2002-2003 and hundreds of seismic event in a day, especially annual peak of 2,100 in 2003. Then the number of seismic activity has declined since 2006 to the background level in 1999-2001. According to the typical frequency of volcanic earthquakes in the Baegdusan volcano, the frequency distribution of typical volcanic earthquakes between 2002 and 2005 indicates that all the main frequency of the earthquakes basically falls down less than 5 Hz and 5-10 Hz. These events are all the VT-B and LP events caused by the shallow localized fracture and intrusion of magma. The horizontal displacement measurement by GPS during the period from 2000 to 2007 of the Baegdusan stratovolcano area indicates that an inflated process has been centered at the summit caldera since 2002. The displacement between 2002 and 2003 reached at a maximum value of 4 cm. After 2003, the deformation rate of the volcano continued to decrease with unusual variation during the period from 2006 to 2007. After 2003 the vertical displacement uplift rate falls down gradually but still keeps in an uplift trend in northern slope. It is generally believed that when $^3He/^4He(R)$ in a gas sample from a hot spring exceeds $^3He/^4He(R)$ in the atmosphere, it can be concluded that mantle-source. And temperatures of hot springs are rising steadily to $83^{\circ}C$. It is unrest signals at the Baegdusan, which is potentially active. The Baegdusan volcano is now in unrest status, there is eruption threat in the near future. Intensified monitoring and emergency response plan for volcanic risk mitigation are urgent for the volcano.

• The Journal of the Petrological Society of Korea
• /
• v.22 no.1
• /
• pp.35-47
• /
• 2013

The Baegdusan Volcano which erupted violently at 1000 AD is still have possibility of eruption. Therefore, it is necessary to monitor regularly the possibility of eruption. However, it is very difficult to install regular monitoring system or to get regularly monitored data due to geopolitic problems. This is why we have to develop regular monitoring technique using satellite. The geoid in the Baegdusan Volcanic area calculated from gravity data obtained from GRACE satellite, decreased from 2002 to 2005. The period of decreasing is well matched with time when magma activities were recognized in the Baegdusan Volcanic area. The decrease in geoid is interpreted to be caused by the decrease of water storage. Considering that the amount of rainfall from 2002 and 2005 is almost constant, the decrease in geoid may be related to the magma activity under the Baegdusan Volcano. The geomagnetic total force in the Baegdusan Volcanic area measured by CHAMP satellite, decreased from 2000 to 2005 and increased after 2005. The period of decrease is well matched with the time with increased activity of magma chamber under the Baegdusan Volcano indicating that the decrease of geomagnetic total force is caused by demagnetization of surrounding rocks due to the increase of temperature of magma chamber. These data indicate the possbility of using change of geoid and geomagnetic total force observed by GRACE and CHAMP satellites for the monitoring of magma activity under the Baegdusan Volcano.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.97-100
• /
• 2008

Mount Fuji is the focus of intense study because of its potential hazard signaled by seismic, geologic and historical activity. Based on extensive seismic data recorded in the vicinity of Mt. Fuji, coda quality factor ($Q_c^{-1}$) using a single scattering model hypothesis, and intrinsic and scattering quality factor $(Q_i^{-1}$ and $Q_s^{-1})$ using the Multiple Lapse Time Window Analysis (MLTW) method was measured. To focus the study on the magmatic structure below Mt. Fuji, to the data were separated into two groups: a near-Fuji region of rays traversing an area with radius 5 km around the summit (R < 5 km), and a far-Fuji region of rays beyond a radius of 20 km around the summit (R > 20 km). The results of the study have a small error range due to the large data sample, showing that all $Q^{-1}$ values in near-Fuji area are greater than those of far-Fuji area, and $Q_i^{-1}$ for both the near and far-Fuji area is higher than $Q_s^{-1}$ at high frequencies. The $Q_i^{-1}$ values of the near-Fuji area are lower than those of the other volcanic areas considered, while values of $Q_s^{-1}$ are not. The low $Q_i^{-1}$ for the volcanic region of near-Fuji suggests that the magmatic activity, or percent of partial melt, at Mt. Fuji is not as active as hot spot volcanoes such as Kilauea, Hawaii.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.6 s.52
• /
• pp.9-18
• /
• 2006

This paper presents schematically the monitoring system installed in Yongjong Bridge, a self-anchored suspension bridge located in the expressway linking Seoul and Incheon International Airport. Automatic measurement of instrumented civil engineering structures is now widely applied for behavior monitoring during construction in field as well as long-term monitoring for lifetime assessment of bridge structures. A representative example of results that can be acquired through structural health monitoring system is presented by means of data measured during a few years after the opening of the bridge. In order to effectively measure the tension force for hangers that have relatively short length or high tension force, a static tension measurement device has been explored. Newly equipped railway system on the existing bridge results in change of dead load, consequently dynamic characteristics have also been changed. This result can be detected by the monitoring system during and after railway construction.

• Journal of Satellite, Information and Communications
• /
• v.8 no.1
• /
• pp.14-22
• /
• 2013

GPS radio occultation is a remote sensing technique probing atmospheric properties based on the fact that GPS signal is refracted and delayed by atmosphere. The FORMOSAT-3/COSMIC mission jointly developed by the USA and Taiwan is providing about 2500 occultation soundings a day on the near real-time basis. The Korean KOMPSAT-5/AOPOD system is preparing to launch for monitoring troposphere and ionosphere using a dual frequency GPS receiver and the antenna for occultation data acquisition. In this paper, we examine the methods for signal processing and the geometry analysis for GPS radio occultation, and look into the retrieval techniques for the temperature and humidity of troposphere and the electron density and scintillation of ionosphere. Using these atmospheric properties, we aim to derive the strategies for applying GPS radio occultation to space weather, for example, ionospheric TEC(total electron content) analysis for earthquake monitoring and the Open API(application programming interface) development for more effective data service.

• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.201-207
• /
• 2017

Failure of the power apparatus causes many inconveniences and problems due to power outage in all places using power such as industry and home. The main causes of faults in the Power Apparatus are aging, natural disasters such as typhoons and earthquakes, and animals. At present, the long high temperature status is monitored only by the assumption that a fault occurs when the temperature of the power apparatus becomes higher. Therefore, it is difficult to cope with the failure of the power apparatus at the right time. In this paper, we propose a power apparatus monitoring system as an efficient countermeasure against general faults except for faults caused by sudden natural disasters. The proposed monitoring system monitors the power apparatus in real time by attaching a thermal sensor, collects the monitored data, and predicts the failure using the accumulated information through learning using the artificial neural network. Through the learning and experimentation of artificial neural network, it is shown that the proposed method is efficient.