• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.307-313
• /
• 2017

The object of this case report is to introduce milled zirconia bar and PEKK female part made by CAD/CAM technology for bar attachment implant supported overdenture in maxillary edentulous patients. For over 2 years, in terms of function and esthetics, satisfactory result was obtained. Esthetically and functionally satisfactory results were obtained in periodic follow up check.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.360.2-360.2
• /
• 2014

박막 태양전지의 변환효율을 높이기 위해 전면에는 반사방지막을, 후면에는 고반사막을 적용한다. 태양전지 구조에서 고반사막을 대신하여 선택적 투과막을 적용할 경우 가시광선은 투과하고 적외선은 광 흡수층으로 재반사되기 때문에 변환효율을 향상 시킬 수 있고 동시에 투명 태양전지를 얻을 수 있다. 선택적 투과 특성을 보이는 지르코니아 박막의 광학적 특성이 이미 보고된 바 있으며, 본 연구에서는 반응성 스퍼터링 방식을 이용하여 지르코니아 박막을 증착하고 산소 유량에 따른 광학적 특성을 관찰한 후 이를 통해 선택적 투과막 성장에 적합한 산소 유량 조건을 얻고자 하였다. 산소 유량에 따라 지르코니아 박막의 투과율은 400 nm 이상의 파장에서 약 10%에서 약 85%의 범위에서 변화하였고 반사율은 적외선 영역에서 최소 약 30%에서 최대 약 60%의 수치를 나타내었다. 이러한 결과로부터 반응성 스퍼터링 시 산소 유량이 지르코니아 박막의 광학적 특성 변화에 큰 영향을 미치는 인자임을 확인하였다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.4
• /
• pp.306-316
• /
• 2018

Monolithic zirconia has been widely used in fixed partial dentures due to high strength and fracture toughness. Nevertheless, the usage of monolithic zirconia in anterior restoration was limited because of opacity. Recently, esthetic monolithic zirconia blocks are developed by improving translucency and using various shading systems. Manufacturer introduces 3M $Lava^{TM}$ Esthetic with increased cubic phase and fluorescent ingredients is more esthetic than previous monolithic zirconia. This case report describes favorable anterior restorations using translucent monolithic zirconia.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.25-25
• /
• 2003

안정화 지르코니아(Stabilized Zirconia)는 산화물 연료전지 (SOFC: Solid Oxide Fuel Cell), 전기화학식 가스센서 등에 널리 사용되고 있는 대표적인 고체전해질이다. SOFC의 효율향상 및 센서의 저온 동작을 위해서는 높은 이온전도도를 갖는 고체전해질이 요구된다. 안정화 지르코니아의 이온 전도도를 향상시키기 위해 MgO, CaO, $Y_2$O$_3$, Yb$_2$O$_3$, Sc$_2$O$_3$ 등의 안정화제가 첨가된 바 있으며, 이들 첨가제의 변화에 의한 전기전도도 향상 연구는 현재 성숙된 단계이다. 지르코니아 고체전해질의 안정화제가 정해진 상태에서 재료의 전기전도도를 향상시키는 다른 방법은 입계에서의 이온전도도를 높이는 것이다. 안정화 지르코니아는 입계가 입내에 비해 저항이 약 100-10000배 정도크기 때문에, 입계가 얇은 두께에도 불구하고 전해질의 저항에서 큰 역할을 한다고 알려져 있다. 일반적으로 입계의 Si-포함상 편석, 입계액상, 공간전하층등이 입계의 저항에 대한 원인으로 받아 들여 지고 있다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.293-300
• /
• 2022

Various materials and restorative options have been introduced recently with growing interest in esthetic dental treatment in modern society. Zirconia is especially known for its biocompatibility as well as remarkable toughness and resistance to wear, but it is limited in its use for esthetically focused treatment in anterior region for its white opacity. Lately the development of different kinds of zirconium blocks, such as colored block, clear block, and multi-layered block, allowed more extensive use of zirconia as a treatment option. This report describes a case, in which a prosthetic crown maxillary anterior region was stained with a combination of various coloring liquids before sintering to reproduce natural-looking color scheme in final restoration. The case was reported as the utilization of coloring liquid on monolithic zirconia crown could achieve esthetically satisfying prosthesis for both dentist and patient.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.4
• /
• pp.358-363
• /
• 2015

Previously, the usage of monolithic zirconia in anterior restoration was limited because of problems such as the monotony of tones and shades which would compromise the outcome of esthetic purpose. Zirconia was merely used as a coping with additional porcelain veneering whereas porcelain chipping cannot be evaded. Recently, with the improvement of monolithic zirconia, the various translucency and tones made it possible to use zirconia for anterior restoration. In this case, a male patient of 63 years old received a full mouth rehabilitation with monolithic zirconia. After a period of time usage, the outcome showed a favorable result functionally and esthetically.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.1
• /
• pp.95-101
• /
• 2013

Recently, the demand for esthetic improvement by a treatment neither time consuming nor invasive is increasing. The patient wanted the maxillary anterior teeth appearance to be improved by prosthetic treatment, not other treatments such as orthodontic, periodontal, and endodontic treatments, despite the limit of esthetic improvement. In this case, among the recent variety of all ceramic systems for the aesthetic prosthetic restoration, we selected the zirconia-based system as a method of restoration in order to conceal the discoloration of teeth. The patient was satisfied with the esthetic results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.3
• /
• pp.193-200
• /
• 2024

In patients with severe alveolar bone resorption on mandibular anterior edentulous areas, it can be difficult to place implants in the location for crowns, and to create the fixed prosthesis having an adequate emergence profile or embrasure, which makes maintenance difficult. Fabricating a removable zirconia prosthesis with a milled bar on poorly positioned implants can be a good option because of easy maintenance. In this case, the patient had severe bone resorption on mandibular anterior region, and large vertical space. We report on the aesthetical and easy-to-maintain results by placing two implants and fabricating a zirconia prosthesis using milled bar.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.41-47
• /
• 2020

Purpose: The purpose of this study was to evaluate the flexural strength and reliability of highly translucent colored zirconia for all ceramic restoration. Materials and Methods: Bar-shaped specimens (25 × 4 × 2.5 mm) were prepared from highly translucent monolithic zirconia. Three experimental groups were set up according to color (shade A0, A1, and A3). For each group, 20 specimens were prepared. Flexural strength was determined using a 3-point flexural test and results were analyzed with one-way ANOVA test. Weibull statistical analysis provided 2 parameter estimates: Weibull modulus and characteristic strength. X-ray diffraction (XRD) analysis was performed. Results: There was statistically significant difference between uncolored (Shade A0) and colored (shade A1 and A3) (P < 0.05), but there was no difference between colored groups (P > 0.05). The uncolored group had higher reliability compared with colored study groups. On x-ray diffraction analysis of each group, typical peaks of tetragonal phase appeared in all groups. Conclusion: Within the limitations of this in vitro study, coloring highly translucent zirconia had significant effect on flexural strength and reliability. Therefore, clinicians should be careful when using highly translucent colored zirconia to prevent breakage of veneering ceramic and enhance aesthetics.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.3
• /
• pp.115-119
• /
• 2001

Hydroxyapatite-yttria stabilized zirconia bioceramics containing fine zirconia particles were prepared as 3-layered functionally graded materials (FGMs) using a spark plasma sintering (SPS) and hot pressing (HP) apparatuses. The pretreatment of the raw hydroxyapatite promoted the sinterability of hydroxyapatite. The maximum density of pretreated FGM composites could be obtained at lower temperature than that for he untreated FGM samples. No decomposition from hydroxyapatite to three calcium phosphate (TCP) was observed in FGMs of HAp-$ZrO_2$ sintered below $1200^{\circ}C$ for 8 min under 10 MPa by SPS. However, the transformation of the tetragonal zirconia to the cubic modification had occurred in FGMs at this temperature. The presence of zirconia i.e. stress induced transformation of zirconia may be expected to enhance the mechanical properties of HAp-$ZrO_2$ FGM. The SPS is concluded as a better method to fabricated the FGM with dense and high strength compared with HP process.