• Title/Summary/Keyword: 중복 분석

Search Result 1,453, Processing Time 0.028 seconds

Research for Calibration and Correction of Multi-Spectral Aerial Photographing System(PKNU 3) (다중분광 항공촬영 시스템(PKNU 3) 검정 및 보정에 관한 연구)

  • Lee, Eun Kyung;Choi, Chul Uong
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.7 no.4
    • /
    • pp.143-154
    • /
    • 2004
  • The researchers, who seek geological and environmental information, depend on the remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, the adverse weather conditions and the expensive equipment can restrict that the researcher can collect their data anywhere and any time. To allow for better flexibility, we have developed a compact, a multi-spectral automatic Aerial photographic system(PKNU 2). This system's Multi-spectral camera can catch the visible(RGB) and infrared(NIR) bands($3032{\times}2008$ pixels) image. Visible and infrared bands images were obtained from each camera respectively and produced Color-infrared composite images to be analyzed in the purpose of the environment monitor but that was not very good data. Moreover, it has a demerit that the stereoscopic overlap area is not satisfied with 60% due to the 12s storage time of each data, while it was possible that PKNU 2 system photographed photos of great capacity. Therefore, we have been developing the advanced PKNU 2(PKNU 3) that consists of color-infrared spectral camera can photograph the visible and near infrared bands data using one sensor at once, thermal infrared camera, two of 40 G computers to store images, and MPEG board to compress and transfer data to the computer at the real time and can attach and detach itself to a helicopter. Verification and calibration of each sensor(REDLAKE MS 4000, Raytheon IRPro) were conducted before we took the aerial photographs for obtaining more valuable data. Corrections for the spectral characteristics and radial lens distortions of sensor were carried out.

  • PDF

Developing Sequential ConcepTests for In-service Science Teachers' Training based on Peer Instruction: Focus on 'Principle of Pinhole Camera' (동료 교수법 기반의 과학교사 연수를 위한 단계형 개념검사문항 개발 -바늘구멍 사진기의 원리 학습을 중심으로-)

  • Lee, Ji-Won;Kim, Jong-Won;Kim, Kyu-Hwan;Hwang, Myung-Su;Kim, Jung-Bog
    • Journal of The Korean Association For Science Education
    • /
    • v.33 no.2
    • /
    • pp.229-248
    • /
    • 2013
  • The purpose of this study is to develop sequential concept tests (ConcepTest) for teachers' conceptual change on the straight propagation of light through in-service training of science teachers by peer instruction. We revised the ConcepTests for attaining the goal concept by implementing similar training courses for teachers three times and analyzing the results using both Hake gain and verbal protocol. The final form helped most teachers to reach the goal concept. While teachers are solving a given concept problem test, they had shown not only significant cognitive conflict to select one among candidate answers, but also used the concept obtained through the previous problem. The sequential ConcepTests developed in this study can be useful for training elementary and secondary teachers or pre-service teacher education.

Time Synchronization Algorithm using the Clock Drift Rate and Reference Signals Between Two Sensor Nodes (클럭 표류율과 기준 신호를 이용한 두 센서 노드간 시간 동기 알고리즘)

  • Kim, Hyoun-Soo;Jeon, Joong-Nam
    • The KIPS Transactions:PartC
    • /
    • v.16C no.1
    • /
    • pp.51-56
    • /
    • 2009
  • Time synchronization algorithm in wireless sensor networks is essential to various applications such as object tracking, data encryption, duplicate detection, and precise TDMA scheduling. This paper describes CDRS that is a time synchronization algorithm using the Clock Drift rate and Reference Signals between two sensor nodes. CDRS is composed of two steps. At first step, the time correction is calculated using offset and the clock drift rate between the two nodes based on the LTS method. Two nodes become a synchronized state and the time variance can be compensated by the clock drift rate. At second step, the synchronization node transmits reference signals periodically. This reference signals are used to calculate the time difference between nodes. When this value exceeds the maximum error tolerance, the first step is performed again for resynchronization. The simulation results on the performance analysis show that the time accuracy of the proposed algorithm is improved, and the energy consumption is reduced 2.5 times compared to the time synchronization algorithm with only LTS, because CDRS reduces the number of message about 50% compared to LTS and reference signals do not use the data space for timestamp.

A Study on the Implications and Trends of Logistics Security Assurance Programs for International Trade Facilitation (국제물류보안 인증제도 동향 및 시사점에 관한 연구)

  • Ko, Hyun-Jeung
    • Journal of Korea Port Economic Association
    • /
    • v.27 no.2
    • /
    • pp.333-354
    • /
    • 2011
  • After the terrorist attack of 9/11 on the USA, the security concern to global trade has been raised. In particular, the USA has actively promoted a series of initiatives and rules such as CSI, 24 hour rule, C-TPAT, and so on in the area of logistics activities, which aimed to better protect the country against the potential terrorist threats. While implementing such schemes called as a multi-layed logistics security strategy, a large number of countries trading with USA are facing with the issues of additional time and costs for inspecting cargos in their logistics facilities. As a result, most countries all over the world have sought a way to minimize the impacts from such strategy. The Korea also is preparing the several security programs operated by various ministries, which are aiming to not only improve the efficiency of trade flows but also to ensure supply chain security. However, many companies are expressing the inefficiency of operating such programs. Thus, this paper analyzed several global supply chain security programs currently adopted by international organizations(ISO, WCO, and IMO) and major countries(USA, EU, and Singapore) and suggested a guideline for developing the national logistics security system.

Fast Handover Mechanism for Multi-Interface MIPv6 Environments and Performance Evaluation (다중 인터페이스 MIPv6 환경에서의 Fast Handover 방안 및 성능 분석)

  • Park, Man-Kyu;Hwang, An-Kyu;Lee, Jae-Yong;Kim, Byung-Chul
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.44 no.12
    • /
    • pp.34-43
    • /
    • 2007
  • Recently, in addition to the sharp increase of mobile nodes, various kinds of wireless technologies are available for mobile nodes. If IPv6 technology is applied to the network, multi-homing terminals which have several public IP addresses on one interface will be common. Accordingly, there are many research activities on mobility management for multi-interface, multi-homming nodes. In this paper we propose an extended fast handover mechanism for multi-interface MIPv6 environments that uses multi-interface FBU (MFBU) message instead of the existing FBU message. The MFBU message has the "tunnel destination" mobility option that points a specific tunnel destination other than NAR, and "T" flag that indicates the existence of tunnel destination option. The proposed mechanism can improve the TCP performance by mitigating packet reordering during FMIPv6 handover that can cause unnecessary congestion control due to 3 duplicate ACKs. In this paper, we implemented a multi-Interface MIPv6 simulator by extending a single-interface MIPv6 simulator in NS-2, and showed that the performance of TCP traffic is improved by using the proposed multi-interface fast MIPv6.

A Study on Estimating Construction Equipment Annual Standard Operating Hours (건설기계 연간표준가동시간 산정에 관한 연구)

  • Lee, Joong-Seok;Huh, Young-Ki
    • Proceedings of the Korean Institute Of Construction Engineering and Management
    • /
    • 2007.11a
    • /
    • pp.219-224
    • /
    • 2007
  • As use of construction equipment has been increasing continuingly, the proportion of equipment expense to the total construction cost has become higher. However, there is a difference between the equipment expenses section in 'Poom-Sam' and practical data, because 'Poom-sam' does not consider non-working days due to weather conditions, legal holidays and management conditions. Therefore, 'Poom-Sam' does not present a reasonable standard for estimating construction equipment expenses. In this study, to estimate realistic construction equipment operating hours, firstly, construction equipment was classified according to work, and weather conditions, in which each work could not be executed, were established. Then, weather data on Seoul and Busan(2004${\sim}$2006) and legal holidays were analyzed to suggest annual standard operating hours. The annual standard operating hours of earthmoving & excavating, compaction, and drilling equipment was estimated to be 1,430 hours, and lifting equipment, concrete paving equipment, asphalt paving equipment, concrete equipment, and crushing & conveying equipment were estimated to be 2,124 hours, l,156hours, 1,188hours, 1,688hours, and 2,152hours respectively.

  • PDF

A Study on Establishing Online Document Communication System by Means of Intranet Web Site (ODCS(Online Document Communication System)인트라넷 웹사이트 구축과정 및 사용자 효과 연구)

  • 양초산
    • Archives of design research
    • /
    • v.17 no.3
    • /
    • pp.167-178
    • /
    • 2004
  • The purpose of this treatise is to show merits and method of establishing Lotte department store design division Online Documents Communication System through illustration of examples of intranet in which internet environment convenient to use for its openness is applied for establishing Design Online Documents Communication System for fundamentals of organization. In this connection merits and effect attainable from establishing Design Outline Documents Communication System of the enterprise as found were as follows: Firstly, it brought about reduction in workload of staffs through sharing various existing resources. It reduced redundant works and enables speedy handling of works. Secondly, it was possible to exchange viewpoints and share information by pertinent parties. Thirdly, by expediting information exchange and communication among persons in charge it was possible to improve work efficiency. Fourthly, it was possible to build and operate such system at relatively low cost on the basis of web browser. Without using any other significant instrument or equipment but by linking it to business network and using existing computer system operation was possible. Fifthly, by common sharing of work exclusive to design room through on-line it was possible to improve professionalism and convenience in data preservation. Through this treatise and survey and study on process for establishing intranet it was possible to find that there were sharing work, improving work efficiency, reducing workload, saving cost and expediting communication to a significant degree.

  • PDF

Causes and Clinical Outcomes of Congenital Hydronephrosis (신생아 수신증의 원인과 임상 경과에 대한 고찰)

  • Kang Hyun-Young;Chang Mea-Young;Lee Jae-Ho
    • Childhood Kidney Diseases
    • /
    • v.9 no.1
    • /
    • pp.69-75
    • /
    • 2005
  • Purpose : The most important management of congenital hydronephrosis consists of the early diagnosis and evaluation of the pathologic abnormalities of congenital hydronephrosis. This study was conducted to investigate the different causes of hydronephrosis and its clinical outcome. Methods : 54 live neonates who were hospitalized and diagnosed with congenital hydronephrosis at Chungnam National University Hospital from Aug. 1998 to Aug. 2003 were retrospectively analyzed. Results : Hydronephrosis(renal pelvic AP diameter $gt;5 mm) was postnatally detected in 54 cases(2.1%) among 2,539 neonates who were hospitalized from Aug. 1998 to Aug. 2003. There were three times more males than females. Additional imaging studies revealed that ureteropelvic junction obstruction was the most common postnatal diagnosis(48.7%), followed by multicystic dysplastic kidney, vesicoureteral reflux and duplication kidney with ureterocele. Spontaneous regression of hydronephrosis was revealed in 25 renal units(75.8% ) of mild hydronephrosis, 14 renal units of moderate hydronephrosis and 1 renal unit of severe hydronephrosis. Operative correction were carried out in 14 renal units(70%) of severe hydronephrosls. Conclusion : The most common established cause of congenital hydronephrosis in this study was ureteropelvic junction obstruction. There are many cases of spontaneous regression in mild to moderate congenital hydronephrosis. Urinary tract infections occur in many neonates with hydronephrosis. Therefore, early detection and evaluation of congenital hydronephrosis and continuous follow-up at regular intervals are necessary for conservation of renal function. (J Korean Soc Pediatr Nephrol 2005;9:69-75)

  • PDF

Words in the Korean Language Used to describe Pain in Cancer Patients - for the Development of Korean Cancer Pain Assessment Tool (K-CPAT) - (표준형 성인 암성 통증평가 도구 개발을 위한 암성 통증 어휘조사)

  • Jang, Se-Kwon;Park, Jean-No;Yeom, Chang-Hwan;Lee, Myung-Aha;Song, Chan-Hee;Yoon, So-Young;Lee, Young-Hee;Choi, Youn-Seon
    • Journal of Hospice and Palliative Care
    • /
    • v.6 no.1
    • /
    • pp.1-10
    • /
    • 2003
  • This paper addresses the minor differences in the description of pain in Korean language in order to develop a standarized cancer pain aneument tool for Korean adults, Korean Caancer Pain Assessement Tool. The subtle differences in the meaning of expressions used cannot be translated into English and therefore we omiltted the English abstract.

  • PDF

High Prevalence and Genotypic Characterization of Metallo-β-Lactamase (MBL)-Producing Acinetobacter spp. Isolates Disseminated in a Korean Hospital (국내 대학병원에서 분리된 Metallo-β-Lactamase (MBL) 생성 Acinetobacter spp. 분리주의 높은 출현율과 유전형 특징)

  • Yum, Jong Hwa
    • Korean Journal of Clinical Laboratory Science
    • /
    • v.51 no.4
    • /
    • pp.444-452
    • /
    • 2019
  • Carbapenem resistance, mediated by the major acquired metallo-β-lactamase (MBL) genes, has been increasingly reported, particularly for clinical isolates of Acinetobacter spp. Of the 191 nonduplicate clinical isolates of the carbapenem-nonsusceptible Acinetobacter spp. evaluated, 125 isolates (65.4%) were positive for the modified imipenem or meropenem-Hodge test, and 49 isolates (25.7%) were positive for the imipenem-EDTA+SMA double disk synergy test (DDS). PCR and sequencing of the blaVIM-2-allele and blaIMP-1-allele showed that 29 A. baumannii isolates and 1 A. calcoaceticus isolate had blaVIM-2, whereas 16 A. baumannii isolates and 2 A. calcoaceticus isolates had blaIMP-6; 1 isolate of the A. genomospecies 3 had blaVIM-2 and blaAIM-1. All the above MBL genes belong to class 1 integron. The size of class 1 integron encompassing blaVIM-2 or blaIMP-6 ranges from 2.8 kb to 3.2 kb in clinical isolates of A. baumannii, and 3.2 kb to 3.5 kb in clinical isolates of A. genomospecies 3. blaVIM-2 was most often located first or second in the class 1 integron, and these integrons often included aacA4. Due to dispersion of the MBL-producing Acinetobacter spp. as well as integron, which may encompass various resistance genes, there is an expectation for the increase of multidrug resistant Gram-negative bacteria, including resistance of carbapenems such as imipenem or meropenem. Hence, the development of new antimicrobial agents for treating severe Acinetobacter spp. infections is needed.