• Journal of the Korea Institute of Building Construction
• /
• v.14 no.6
• /
• pp.561-569
• /
• 2014

In construction site, BIM is used in part of construct-ability review and design mistake checking. However, in a current domestic construction site, except public order project, most of work in private order project has been processing based on 2D work. As an expert resists to certain point in introduction of new technique, it may be shown in the introduction of BIM. For this, We need to analysis construct-ability of introducing BIM, work field of introducing and operational capability about present domestic construction engineers. Therefore, this study solves the problem of existing construct-ability analysis, and it visualizes the various information and objects for an effective job performance. Furthermore, construct-ability analysis by BIM that can use an intergrated management is theoretically examined and practical field-application priority among conclusions is proposed through a survey targeting on the hand-on worker. Therefore, this study suggests a factor supplying for a business-centric introduction plan and support condition.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.145-151
• /
• 2014

Purpose: The purpose of this study was to investigate the microleakage in class II cavity resin restorations used with resin-modified glass ionomer (RMGI) lining material depending on two different applying methods; classical delivery method using a dental explorer and a specially designed rotating bur. Materials and Methods: A total thirty-six extracted teeth were prepared with a class II proximal box, and randomly divided into three groups: 1) control group with no lining added and the proximal box restored (Group I), 2) the second group used RMGI as a lining material which was spread with an explorer (Group II), 3) the third group used a specially designed rotating bur to thin out RMGI (Group III). All teeth were restored with the same manner using incrementally placed resin composite. All 36 teeth were prepared and sectioned for the dye penetration test, and observed with a stereomicroscope for scoring the dye penetration. Results: When RMGI liners were used, both groups using an explorer and the special bur with the liner had significantly less microleakage than the control group with no liner (P < 0.05). The 50% of the group with RMGI liner using the bur showed no microleakage under a dye penetration test whereas all the teeth in control group showed microleakage of different degrees. However, there was no statistically significant difference between Group II and Group III. Conclusion: RMGI is an effective lining material to decrease microleakage in class II composite resin restorations regardless of applying methods.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.74-83
• /
• 2017

The recently introduced public rental housing REITs was just different the business structure from the existing public rental housing system and the basic supply system is the same. So the ownership conversion for public house over 10 years rental duration is possible after half of the obligated rental duration according to the agreement between lessor and lessee. However rental business operators are likely to have a negative attitude to the early ownership conversion because of less expected profit. Thus, there is a need for an analysis of proper early ownership conversion moment that can achieve public purposes while ensuring the profitability of public rental housing REITs. In this study, the characteristics of the ownership conversion rights that can lessee to exercise considered to be options. Also the nature of 'REITs', 'public rental housing REITs' is considered to be affected by the macroeconomic variables. Thus, this study analyzed the value for ownership conversion in the public rental housing REITs according to real option scenarios reflecting macroeconomic variables. As a result, according to the change of the variation rate of the macroeconomic variables, it was found that with adjustable early ownership conversion time using the DCF(Discounted Cash Flow) model. Therefore, it is possible to ensure profitability of early ownership conversion by predicting the variation of variables.

• Korean Journal of Food Science and Technology
• /
• v.50 no.3
• /
• pp.297-307
• /
• 2018

The aim of this study was to develop a seasoning paste fermented by Aspergillus oryzae and Bacillus subtilis using three edible insects: Tenebrio molitor larvae, Gryllus bimaculatus, and Bombyx mori pupa. No significant changes in pH and titratable acidity were observed between the insect pastes and soybean control during a 5-week fermentation process. The amino nitrogen was 0.35-0.50% (w/w) in the early stage of the fermentation and increased to 0.72-0.78%. The total nitrogen was 2.36-3.62% (w/w) in the early stage and was preserved during the fermentation period. Free amino acids of the insect pastes were similar to those in soybean paste. In general, the fermented insect pastes showed a lower flavor and color than soybean paste but B. mori pupa-fermented paste did not show any significant difference in preference from soybean. Glutamate, aspartate, lysine, phenylalanine, arginine, and serine were found to affect taste preference. It was possible to ferment edible insect protein to produce a fermented seasoning paste like Korean doenjang.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.5-38
• /
• 2006

Although in Korea there are only three examples of wooden coffins being found in burial mounds - from the Daho-ri, Songhyun-dong, and Munyung tombs, in Japan data on the shape and structure of wooden coffins from the Gofun era is relatively abundant. The wooden coffins of the Gofun era of Japan can be classified into either the dugout log style or the combined boards style according to their method of manufacture. They can also be divided by shape, into such categories as the boat shape, the split bamboo shape, the box shape, and so on. The box shape category can be further divided into the assembled type and the nailed type, according to how the boards are put together. Japanese Umbrella Pine (Sciadopitys verticillata) was favored as coffin-wood in all ages, but during the later Gofun era easily obtained woods such as the Japanese cedar (Cryptomeria japonica) or the Hinoki Falsecypress (Chamaecyparis obtusa) were also used. The coffins found at Daho-ri and Songhyun-dong are similar to the Japanese dugout log style in shape and manufacture, while the king's and queen's coffins excavated at Munyung Tomb are seen to have had direct influence on the appearance of nailed coffins Japan. The coffin in Songhyun-dong 7th mound was originally a dugout log boat. It was probably used for practical reasons such as the bugproof, anti-corrosion qualities of camphor wood, not because of ideological reasons such as in a boat burial (in which the boat takes the deceased to the after world). Because the Changnyong region is inland, where camphor trees do not grow, using an already existing boat may have been the only way to procure a camphor-wood coffin. From historical circumstances, it may be inferred that the camphor trees were imported into Korea from Japan, between which there was much cultural exchange.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.1
• /
• pp.3-12
• /
• 2021

In the remodeling projects, clients without architectural expertise have limitations in presenting requirements accurately. In some cases, designers and contractors may not recognize their demands exactly, and deliver final products that are different from the clients' intentions. 3D modeling visualizing final products in previous has been regarded as a solution to enhance understanding and communication. However, this approach has the limitation that the final results are presented as a virtual outputs. In the remodeling project, an alternative, mixed-reality, is likely to reinforce the reality as it enables to present remain structure and the parts to be built together. This paper examines the mixed reality as a solution to support decision making of clients and practitioners in remodeling projects. The examinations is conducted in high-rise office remodeling projects by means of action-research. Clients and practitioners, overview product models presented in the format of 2D drawings, BIM and mixed reality asked to evaluate the effectiveness of each methods in 12 standards. The results have shown that mixed reality has improved the sense of reality, making it easier to predict results, but recognizing patterns is difficult in some areas such as the floor, and it caused dizziness.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2021.04a
• /
• pp.25-25
• /
• 2021

전 세계에 유통되고 있는 Cypripedium속 식물 56종 중 한반도에는 4종이 분포하고 있다. 국내의 Cypripedium속 식물 중 멸종위기 1급 식물은 광릉요강꽃과 털복주머니란이 있으며, 복주머니란은 멸종 위기 2급 식물로 분류하였다. 본 연구는 이러한 복주머니란 식물의 육묘기술을 개발하기 위하여 연구를 수행하였다. 처리는 원예용 상토, 마사토 100%, 질석 2 : 펄라이트 1의 비율로 혼합한 인공토양, 산야초 상토, 소립인 난석 등 5처리를 하여 복주머니를 스티로폼 박스(가로 40, 세로 50, 높이 15cm)에 식재하여 4개월 경과 후 조사한 결과 산야초 상토에서 출아율이 67.0%로 가장 많았으며, 질석 2 + 펄라이트 1의 처리구가 53.0%, 소립인 난석 처리구가 48.0%순으로 높았다. 출아율이 가장 좋았던 산야초 상토의 경우 초장은 3.0cm, 엽수는 주당 1.9개, 엽폭은 1.0cm로 다른 처리구보다 생육이 양호하였다. 또한 털복주머니란 실생묘를 노지에서 1년 동안 순화한 묘를 자생지 외 지역의 적응성을 확인하기 위해 경기도 양평에 위치한 국립수목원 내 Cypripedium 전문 전시원에 660주를 봄에 식재하였다. 그해 9월에 생존율 을 조사한 결과 52.5% 이었고, 초장이 5.8cm, 뿌리수는 주 당 3.6개, 뿌리길이는 6.4cm 등 생육도 정상적으로 진행되는 것으로 조사되었다. 이와같은 연구를 바탕으로 멸종위기종인 복주머니란의 적정 환경 조성과 육묘기술 및 현지 적응성을 향상시킨다면 멀지 않은 시기에 복주머니란의 복원 사업은 성공적으로 마무리될 것으로 판단된다..

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.152-164
• /
• 2018

Fermented seasoning pastes were prepared by Aspergillus oryzae and Bacillus subtilis using three edible insects, Tenebrio molitor larvae (TMP), Gryllus bimaculatus (GBP), and Bombyx mori pupa (SPP), with soybean (SBP) as a negative control. Volatile compounds were extracted by the headspace solid-phase microextraction (HS-SPME) method and confirmed by gas chromatograph-mass spectrometry (GC-MS). In total, 121 volatiles from four samples were identified and sub-grouped as 11 esters, 18 alcohols, 23 aldehydes, 5 acids, 10 pyrazines, 2 pyridines, 7 aromatic hydrocarbons, 10 ketones, 19 alkanes, 9 amides, 4 furans and 3 miscellaneous. TMP, GBP, SPP and SBP had 48, 54, 36, and 55 volatile compounds, respectively. Overall, 2,6-dimethylpyrazine and trimethylpyrazine were found by a high proportion in all samples. Tetramethylpyrazine, a main flavor of doenjang, a Korean fermented seasoning soybean paste, was identified as one of the major compounds in TMP, SPP, and SBP. SBP had benzaldehyde, hexanal, n-pentanal, and aldehydes and SPP with pyrazines.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.135-146
• /
• 2011

Steel structures have been generally painted to prevent corrosion damage. However, the painted film is deteriorated with increase in service life, and then corrosion damage resulting in cross sectional area occurs on steel surface. As a result, the buckling strength of steel structures can be decreased due to the corrosion damages. The evaluation method of the axial buckling strength of columns about a variety of section shapes and supporting conditions have been presented, but evaluation method of buckling strength about irregular nonprismatic columns is not established. In this study, the axial buckling strength of corroded steels was evaluated based on the buckling test results of corroded steel specimens that were cut off at a temporary steel structure. The corroded specimens were picked up total 10 specimens according to various slenderness ratio from the web of a temporary structure's main beam. The length of specimens is 200, 300, 400, 500 and 600mm respectively. The rust productions were removed by the chemical treatment. Then, the surface geometry was measured at intervals of $1{\times}1mm$ by using the optical 3D digitizing system, and the residual thickness of the specimens was calculated. The axial buckling test was performed on 10 corroded specimens and 12 non-corroded specimens under the fixed-fixed support condition. From the test results, the effect of corrosion damages on axial buckling load was investigated. Regardless of corrosion damage degree, the axial buckling strength of corroded specimens and non-corroded specimens was evaluated identically by using minimum average residual thickness or average residual thickness to minus its standard deviation. Reasonable measuring intervals of residual thickness was proposed by using the results to apply for practical works.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.72-84
• /
• 2010

This study was attempted in order to offer basic data for implementing and applying Samjonseokjo(三尊石造), which is one of traditional stone construction method, by confirming how the constructive principle is expressed such as proportional beauty, which is contained in the modeling of Triad of Buddha Carved on Rock that was formed in the period of the Three States, centering on Triad of Buddha Carved on Rock in Susan. The summarized findings are as follows. 1. As a result of analyzing size and proportion of totally 17 of Triad of Buddha Carved on Rock, the average total height in Bonjonbul(本尊佛) was 2.96m. Right Hyeopsi(右挾侍) was 2.19m. Left Hyeopsi(左挾侍) was 2.16m. The height ratio according to this was 100:75:75, thereby having shown the relationship of left-right symmetrical balance. The area ratio in left-right Hyeopsi was 13.4:13.7, thereby the two area having been evenly matched. 2. The Triad of Buddha Carved on Rock in Seosan is carved on Inam(印岩) rock after crossing over Sambulgyo bridge of the Yonghyeon valley. Left direction was measured with $S47^{\circ}E$ in an angle of direction. This is judged to target an image change and an aesthetic sense in a Buddhist statue according to direction of sunlight while blocking worshipers' dazzling. 3. As for iconic characteristics of Buddha Carved on Rock in Seosan, there is even Hyeopsi in Bangasang(半跏像) and Bongjiboju(捧持寶珠) type Bosangipsang. In the face of Samjon composition in left-right asymmetry, the unification is indicated while the same line and shape are repeated. Thus, the stably visual balance is being shown. 4. In case of Triad of Buddha Carved on Rock in Seosan, total height in Bonjonbul, left Hyeopsi, and right Hyeopsi was 2.80m, 1.66m, and 1.70m, respectively. Height ratio in left-right Hyeopsibul was 0.60:0.62, thereby having been almost equal. On the other hand, the area ratio was 28.8:25.2, thereby having shown bigger difference. The area ratio on a plane was grasped to come closer to Samjae aesthetic proportion. 5. The axial angle of centering on Gwangbae was 84:46:50, thereby having been close to right angle. On the other hand, the axial angle ratio of centering on Yeonhwajwa(蓮華坐: lotus position) was measured to be 135:25:20, thereby having shown the form of inequilateral triangle close to obtuse angle. Accordingly, the upper part and the lower part of Triad of Buddha Carved on Rock in Susan are taking the stably proportional sense in the middle of maintaining the corresponding relationship through angular proportion of inequilateral triangle in right angle and obtuse angle. 6. The distance ratio in the upper half was 0.51:0.36:0.38. On the other hand, the distance ratio in the lower half was 0.53 : 0.33 : 0.27. Thus, the up-down and left-right symmetrical balance is being formed while showing the image closer to inequilateral triangle. 7. As a result of examining relationship of Samjae-mi(三才美) targeting Triad of Buddha Carved on Rock in Susan, the angular ratio was shown to be more notable that forms the area ratio or triangular form rather than length ratio. The inequilateral triangle, which is formed centering on Gwangbae(光背) in the upper part and Yeonhwajwa(lotus position) in the lower part, is becoming very importantly internal motive of doubling the constructive beauty among Samjae, no less than the mutually height and area ratio in Samjonbul.