• Journal of the Korean Institute of Gas
• /
• v.25 no.4
• /
• pp.10-18
• /
• 2021

CO₂ storage technology in an aquifer is one of the most effective way to decrease global warming due to a high storage capacity and economics. A demonstration-scale offshore CO₂ storage project was performed in a geological deep aquifer in the Pohang Basin, Korea for a technological development of large-scale CO₂ storage. A challenging issue in the early design stage of the project was to establish the proper injectivity during CO₂ injection. To solve this issue, injection conditions were calculated by calculating injection rate, pressure, temperature, CO₂ phase change, and thermodynamic properties. For this study, we simulated and numerically analyzed CO₂ phase change from gas to supercritical phase and flow behavior in transport piping and injection tubing using OLGA program. Our results provide the injectivity conditions of CO₂ injection system combined with a bottomhole pressure of an aquifer.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.445-458
• /
• 2016

Most of water curtain cultivation (WCC) area in Korea has been inveterately suffering from the gradual draw-down of groundwater level and related shortage of water resources at the late stage of WCC peak time. To solve this problem, artificial recharge techniques has been recently applied to some WCC area. This study introduces infiltration gallery, which is one of the artificial recharge methods, and tentatively examined the effectiveness of three galleries installed at Sangdae-ri WCC area of Cheongju City. Seven galleries are set up at each empty space between eight vinyl houses in this area and its dimension is designed as 50 cm in each width and height and 300 cm in each length. Installation process was including bed excavation, backfill with gravels and silica sands, and completion of gallery by equipment of piezometer and covering with non-woven cloth. For each B, C, D gallery, 3 types of test including preliminary, four step and one long-term injection were performed. The first preliminary test showed the rough relations between injection rates and water level rise as follows; 20 cm and 30 cm level rise for $33.29{\sim}33.84m^3/d$ and $45.60{\sim}46.99m^3/d$ in B gallery; 0 cm, 16 cm and 33 cm level rise for $21.1m^3/d$, $33.98m^3/d$ and $41.69m^3/d$ in C gallery; 29 cm and 42 cm level rise for $48.10m^3/d$ and $52.23m^3/d$ in D gallery. Afterwards, more quantitative results estimating effectiveness of artificial recharge were reasoned out through stepped and long-term injection tests, which is expected to be employed for estimating water quantity re-injected into the aquifer through these galleries by natural injection over the period of WCC peak time.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.4
• /
• pp.286-296
• /
• 2016

Offshore CCS technology is to transport and inject $CO_2$ which is captured from the power plant into the saline aquifer or depleted oil-gas fields. The more accumulated injected $CO_2$, the higher reservoir pressure increases. The increment of reservoir pressure make a dramatic change of the operating conditions of transport and injection systems. Therefore, it is necessary to carefully analyze the effect of operating condition variations over the injection period in early design phase. The objective of this study is to simulate and analyze the $CO_2$ behavior in the transport and injection systems over the injection period. The storage reservoir is assumed to be gas field in the East Sea continental shelf. The whole systems were consisted of subsea pipeline, riser, topside and wellbore. Modeling and numerical analysis were carried out using OLGA 2014.1. During the 10 years injection period, the change of temperature, pressure and phase of $CO_2$ in subsea pipelines, riser, topside and wellbore were carefully analyzed. Finally, some design guidelines about compressor at inlet of subsea pipeline, heat exchanger on topside and wellhead control were proposed.

• Korean Journal of Animal Reproduction
• /
• v.25 no.4
• /
• pp.399-407
• /
• 2001

The microinjection of retroviral vectors into the perivitelline spaces of MII-stage oocytes increased production of transgenic bovine embryos. However, oocytes have various sizes of perivitelline space, and there is the tendency that the oocyte membranes are damageable by micropipettes during the injection of retroviral vectors into perivitelline spaces or oocytes. Thus, it was not always possible to stably inject retroviral vector into perivitelline spaces of oocytes. Here we used sucrose to minimize the damage of the oocyte membrane. When the oocytes were suspended in 0.5% sucrose, poor quality oocytes showed rough cytoplasmic membranes, while good quality oocytes maintained smooth membranes. However, when the tatters were subjected to in vitro fertilization, no significant differences were observed in cleavage rates (82% of control Vs. 84% of sucrose treated oocytes). The Same trends were obtained from the oocytes fertilized after microinjection of LN$\beta$-EGFP and LNC-hGH genes into the perivitelline spares. The rates of cleavage and blastocyst from microinjection of LN$\beta$-EGFP genes were 81 and 25%, and from microinjection of LNC-hGM genes were 53 and 30%, respectively. The result indicated that microinjected oocytes could develop to the blastocyst stages after in vitro fertilization with no significant difference from control group. Moreover, the integration of hGH-gene (by PCR analysis) was detected in 52% of infected cleaved embryos and the expression of EGFP-gene (under a fluoresrence microscope) was also observed in 34% of infected blastocyst. These results indicated that 0.5% sucrose treatment could be an efficient method not only to select good quality embryos but also to inject retroviral vectors into perivitelline spares without any harm and hence improving developmental rates.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.10
• /
• pp.796-803
• /
• 1998

Intrinsic and proximity gettering are popular processes to get higher cumulative production yield and usually adopt multi-step annealing and high energy ion implantation, respectively. In order to test the combined processed of these, high energy \ulcornerAs\ulcorner ion implantation and 2-step annealing process were adopted. After the ion implantation followed by 2-step annealing, the wafers were cleaved and etched with Wright etchant. The morphology of cross section on samples was inspected by FESEM. The concentration profile of As was measured by SRP. The location and type of secondary defects inspected by HRTEM were dependent on the 1st annealing temperatures. That is, a line of dislocation located at $1.5mutextrm{m}$ apart from the surface at $600^{\circ}C$ lst annealing was changed to some dislocation lines or loops nearby the surface at 100$0^{\circ}C$. The density of dislocation line was reduced but the size of the defects was enlarged as the temperature increased.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.275-284
• /
• 2016

The software used in the nuclear safety field has been ensured through the development, validation, safety analysis, and quality assurance activities throughout the entire process life cycle from the planning phase to the installation phase. However, this evaluation through the development and validation process needs a lot of time and money, and there are limitations to ensure that the quality is improved enough. Therefore, the effort to calculate the reliability of the software continues for a quantitative evaluation instead of a qualitative evaluation. In this paper, we propose a reliability evaluation method for the software to be used for a specific operation of the digital controller in a nuclear power plant. After injecting weighted faults in the internal space of a developed controller and calculating the ability to detect the injected faults using diagnostic software, we can evaluate the software reliability of a digital controller in a nuclear power plant.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.69-76
• /
• 2021

This study is to identify the mineralogical properties of caprock samples from drilling cores of the Pohang basin, which is the research area for the demonstration-scale CO2 storage project in Korea. The interaction of water-rock-gas that can occur due to CO2 injection was identified using geochemical modeling. Results of mineralogical studies, together with petrographic data of caprock and data on the physicochemical parameters of pore water were used for geochemical modeling. Modelling was carried out using the The Geochemist's Workbench 14.0.1 geochemical simulator. Two steps of modeling enabled prediction of immediate changes in the caprocks impacted by the first stage of CO2 injection and the assessment of long-term effects of sequestration. Results of minerlaogical analysis showed that the caprock samples are mainly composed of quartz, K-feldspar, plagioclase and a small amount of pyrite, calcite, kaolinite and montmollonite. After the injection of carbon dioxide, the porosity of the caprock increased due to the dissolution of calcite, and dawsonite and chalcedony were precipitated as a result of the dissolution of albite and k-feldspar. In the second step after the injection was completed, the precipitation of dawsonite and chalcedony occurred as a result of dissolution of calcite and albite, and the pH was increased due to this reaction. Results of these studies are expected to be used as data to quantitatively evaluate the efficiency of mineral trapping capture in long-term storage of carbon dioxide.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.48-56
• /
• 1999

In this paper, we have investigated experimentally the effects of initial oxygen concentration on oxygen pileup phenomenon and the diffusion of implanted impurities. 1.2 MeV $^{11}B^{+}$ and 2.2 MeV $^{31}P^{+}$ ions were implanted into p-type (100) Si wafers with a dose of 1${\times}10^{15}$ / $\textrm{cm}^2$. Secondary ion mass spectrometry(SIMS) measurements were carried out to obtain depth distribution profiles for implanted impurities and oxygen atoms after two-step annealing of $700^{\circ}C$(20 hours)+$1000^{\circ}C$(10 hours). Residual secondary defect distribution and annealing behabiour were also studied by cross-sectional transmission electron microscopy(TEM) observations. Oxygen pileup nearly $R_p$(projected range) were observed by SIMS measurements and considerable amount of residual secondary defect layer were observed by TEM observations. It can be seen that oxygen atoms are trapped at the secondary defects by the experimental results. Enhanced diffusions of boron and phosphorus to the bulk direction were observed with the increasing of initial oxygen concentration.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.10-16
• /
• 2016

In this study, the Ni base superalloy was recycled by Argon oxygen decarburization(AOD) process using an inconel 713C scrap. During AOD process, argon gas was continuously injected 1,000 sccm and oxygen gas was injected into 10, 20 and 30 minutes of 100, 250 and 500 sccm.. In early stage of oxygen injection, the oxygen dose increased with increasing Al, Cr, and Mo content and decreasing C content. And Al content was decreased by carburization with added elements in late stage Because of oxidation was occurred with Al, Cr etc. after the reaction of carbon has been finished. From the results, the ratio of ${\gamma}^{\prime}$ phase reduced due to decreasing of Al content for that reason Al is the main element to form the ${\gamma}^{\prime}$ phase. Also carbide reduced owing to decreasing of C content so the mechanical properties of the specimens excessively injected by excess $O_2$ gas were decreased.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.165-170
• /
• 2020

In this study, after applying VR 360-degree video contents for intravenous infusion education, basic data on whether VR 360-degree video can be applied as educational content in the future is prepared by grasping the empathy and flow of nursing students in graduating grades. The VR 360 degree intravenous infusion educational content was developed in four-step process of planning, production, modification and completion. The design of this study was descriptive research, and the study period was from November 9 to November 22, 2019. The subjects of this study were 4th grade nursing students at a university, totaling 64 students. Nursing students watched VR 360 degree intravenous infusion educational content using HMD(head mounted display) under the safety management of the researcher. As a result of the study, the empathy of nursing students was 5.32±0.88 points and the flow was 6.02±0.84 points out of 7-point scale. The VR 360 degree intravenous infusion educational content developed in this study can be used as an educational medium in subjects and comparative departments, and it is necessary to specifically develop and verify teaching and learning methods in future studies.