• Korean Journal of Plant Resources
• /
• v.20 no.2
• /
• pp.150-154
• /
• 2007

This study was carried out to increase germination by classifying seeds as seed coat colors of three species of genus Pinus. As result, the seeds classified as colors showed a difference. In seed length, Pinus densiflora (Pd) and P. thunbergii (Pt) had no difference while P. rigitaeda (Pr) had a difference between light yellow seeds and dark brown seeds (p<0.05). Only Pt was different in seed width. And in 1,000 seeds weight the three species showed a great difference while were not significantly different in seed moisture contents. In percent germination, all of the three species had a difference, especially that of Pr was very wide. Pd and Pt were not different in mean germination time but Pr showed a difference between light yellow seeds and dark brown seeds.

• Korean Journal of Plant Resources
• /
• v.19 no.5
• /
• pp.580-585
• /
• 2006

This experiment was conducted to study the effects of sulphuric acid, cutting, cold stratification and hot water on the germination of Sophora japonica seeds, which have difficulty to germinate because they have hard and thick seed coats. The seeds were immersed in 30, 60 and 90% sulphuric acid for 30 minutes as seed scarifications, and cut 1/8, 2/8 and 3/8 of the opposite parts of radicles. As cold stratification the seeds were wrapped in wet towel, and then stored in plastic bags in a refrigerator $(4^{\circ}C)$ for 3, 5 and 10 days. The seeds were immersed in hot water $(90{\sim}95^{\circ}C)$ for 2,5 and 10 minutes. Pretreated seeds represented different germination properties, respectively. After sulphuric acid treatment, the seeds showed an increase in germination (G) and germination index (GI). Compared to the other treatments, 90% sulphuric acid showed the highest G (31.7%) and GI (6.2). The G and GI of cut seeds decreased with the increase of seed cutting lengths. And G and GI of cold stratificated seeds were not significantly different among the days treated (p=0.258). Two minutes treatment of hot water showed lower G and Gl than control, and the seeds were not germinated in 5 and 10 minutes treatments of hot water. At the result of relative growth rate and T/R ratio of seedlings from pretreated seeds, the seedlings from seeds in 90% sulphuric acid treatment represented the highest relative growth rate and T/R ratio.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.274-285
• /
• 1996

These experiments were conducted to evaluate the effects of seed coating with ten environmentally acceptable polymers, on germination percentage, water uptake, respiration, emergence and seedling growth characteristics. The water absorption of polymer-coated seeds in saturation condition was highest in klucel and lowest in polyvinyl pyrrolidone(PVP), and that in water was highest in klucel and lowest in maltrin. Respiration rates of polymer-coated seeds in Hwayoungbyeo and Ilpumbyeo were lower than those of none-coated seeds, and those in Daecheongbyeo and Jinmibyeo were higher than that of none-coated seeds, and those of sepiret coated seeds were higher than PVP coated seeds. The germination polimer-coated seed was reduced by one percentage by coating with seed coating machine. Germination percentage was not affected by any of polymer coating in high quality seed, but there were significant effects in low quality seed coating with waterlock, surelease 46 and sepiret significantly reduced germination some cultivars. Germination percentage after accelated ageing treatment were slightly higher most of polymer-coated seeds than in none-coated seeds, but those of sepiret-and klucel-coated seeds were lower significantly. Germination percentage of seeds coated with daran 8600, rnaltrin, sacrust and opadry were enhanced slightly under cold test other polimers reduced germination. The seedling height of polymer-coated seeds were longer than those of none-coated seeds, but those of waterlock, PVP and maltrin coating seeds were shorter, seedling hight was shortened by polimer coating under cold test. Polymer-coated seeds showed higher emergence percentage, shorter emergence time in field condition. The highest emergence percentage and the shortest emergence time was shown at 90% soil moisture content.

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.317-324
• /
• 2007

This study was carried out to obtain the several data for improving the seed supply in Pinus densiflora. Seed characteristics and germination properties according to change of cone production from 2003 to 2006 were analyzed in three plus stands of P. densiflora. P. densiflora showed good production at interval of two years in the periodicity of seed production. Seed potential and percent of filled seed (PFS) among the major seed characteristics showed positive relations to the change of cone production, whereas percent of developed seed (PDS) and seed efficiency showed opposite trend. As a result of regression analysis between seed characteristics and cone production, seed potential ($R^2=0.682$, p<0.01) and PFS ($R^2=0.161$, non-significant) presented positive correlation with cone production while PDS ($R^2=0.418$, p$R^2=0.308$, non-significant) presented negative correlation. In germination properties percent of germination (PG) showed similar tendency to cone production, while mean germination time (MGT) showed opposite tendency. As a result of regression analysis between germination characteristics and cone production, PG showed positive correlation, whereas MGT showed negative correlation. Therefore, we could expect high germination percentage and short period for germination when we harvested cones at good cone production time.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.3
• /
• pp.183-189
• /
• 2004

This study was conducted to examine the changes in the seed physical characters and germinative properties of three tree species at three different storage times in order to determine the most suitable storage time and condition. Seed physical characters and germinative properties were examined from seeds of Fraxinus rhynchophylla, Zanthoxylum schinifolium and Staphylea bumalda that were stored at -18C for 1, 3 and 10 years, and the growth performance and physiological characters of their seedlings were analyzed. Seed physical characters and germinative properties showed significant differences between three storage times as well as three tree species. Seed moisture content of F rhynchophylla and S. bumalda and seed fresh weight of Z. schinifolium decreased with increase of storage time. Storage time represented negative correlation with moisture content and fresh weight (r = -0.822, P<0.01). Seed percent germination of Z. schinifolium and S. bumalda stored for 3 and 10 years decreased less than 15% and 10.7% respectively. Mean germination times for seed of F. rhynchophylla, Z. schinifolium and S. bumalda were delayed 11.9, 5.7 and 9.7 days after a storage time of 10 years, respectively. However the growth and viability of seedlings didn't show a special pattern for storage time and tree species.

• Korean Journal of Environment and Ecology
• /
• v.15 no.1
• /
• pp.57-68
• /
• 2001

해안지역의 녹화 및 조경용으로 유용한 내염성 식물자원임과 동시에 서식지가 급격히 감소하고 있는 순기비나무를 대상으로 하여 생장특성과 번식방법을 규명하기 위한 연구를 수행하였던 바, 그 결과를 요약하면 다음과 같다. 1. 줄기의 생장형태는 포복줄기와 직립줄기가동시에 생장하고, 5개 주요 군락지에 직립줄기의 길이는 평균 46.6cm 이고, 포복경의 초대 길이는 7.6cm에 달하였다. 2. 종작발아율은 황적색의 무처리 종자와 $GA_3$처리 종자에서 71.0~72.3%로 가장 높았으나, 두 처리군사이에는 발아율의 차이가 없었다. 종피현화를 목적으로 한 황산처리는 오히려 종자의 발아를 억제하였다. 3. 종피 색깔이 황적생인 종자는 흑갈색 종자에 비해 평균 21.1%(13~30%)발아율이 높았다. 실득모율은 30% 미만으로 아주 낮았으나 흑갈색 종자에 비해 황적색 종가자 약 2배 높았다. 또한 $LD_{50}$은 황적색 종자가 흑갈색 종자보다 10~20일 짧았다. 4. 종피 색깔과 화학처리가 같은 조건에서 기건저장한 종자와 노천매장한 종자사이에는 발아율, 식득묘율, $LD_{50}$등의 차이가 없었다. 5. 기건저장한 황적색 종자가 바다모래에서 30.3%의 발아율과 10.1%의 실득모율을 나타냈으나, 갯벌흙에서는 전혀 발아되지 않았다. 6. 삽목번식의 경우 추삽에서 발근육은 녹지삽이 가장 높았고, 다음이 반지숙삽, 숙지삽의 순이었다. 발근율이 가장 높은 것은 NAA 200ppm+sucrose 2%를 처리한 녹지로서 96.7%의 발근율을 나타내었다. 발근수는 전반적으로발근율에 비례하는 경향이었다. 7. 하삽에서 NAA 200ppm+sucrose 2%를 처리한 녹지, 반숙지, 숙지의 토양별 발근율은 vermiculite+ perlite(1:1)와 마사토에서는 81.1~87.8%로 높았고, 모래와 해상에서 48.9~77.8%로 낮았다.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.41-49
• /
• 2020

In this study, the effect of seed pre-treatments and pellet coating materials to enhance the efficiency of large-scale propagation of Aster koraiensis seeds were investigated. Seeds were immersed in water for one day, and only those that sank were used for pre-treatment to use filled seeds. Pre-treatments were divided into hormone treatments, with gibberellic acid (GA₃; 200 and 500 ppm) and 24-epibrassinolide (10^-6, 10^-7, and 10^-8M), and priming with potassium nitrate (100 mM of KNO₃). To produce pellet-coated seeds, pellet materials (DTCS or DTK) were applied to control (unprimed) and primed seeds with binders (PVA or CMC). The maximum germination percent (GP) of seeds before pellet coating was 65% (with the priming treatment), and there was no difference in the GP of seeds among hormone treatments. For seeds sown in a growth chamber on filter paper, GP was 41% for control (unprimed/uncoated) seeds, 65% for uncoated primed seeds, 71% for DTCS/PVA-pellet-coated seeds, and 42% for DTK/CMC-pellet-coated seeds. Seeds that were primed first and then pellet-coated showed greatly improved GP, mean germination time (MGT), and germination rate than seeds that were only pellet-coated. For seeds sown in commercial soil in a greenhouse, control seeds had a GP of 27%, whereas primed seeds had the highest GP (58%), and their MGT and GT were 9.4 days and 7.0%·day, respectively. In addition, DTK/PVA-pellet-coated seeds (40%) also had a GP higher than the control (27%), and their MGT was 15-27 days. For seeds sown in sandy-loam soil in a greenhouse, unprimed-pellet-coated seeds and primed-pellet-coated seeds both had GPs ranged of 39%, which were lower than that of control seeds. In general, the seeds that were pellet-coated with DTK had a higher GP than those pellet-coated with DTCS. Furthermore, the MGT of unprimed-pellet-coated seeds was 15.0-19.8 days, which was longer than the MGT of primed-pellet-coated seeds. These results suggest that priming enhances seedling emergence of Aster koraiensis seeds. Moreover, when priming is combined with pellet coating, DTK is a more suitable pellet material than DTCS, and PVA and CMC are equally suitable adhesives.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2004

Seedling mechanization of lettuce is known to be difficult due to the small seed size and the irregular seed shape. The purpose of seed pelleting is to make seedling mechanization possible by enlarging the seed size. After that, it can reduce seedling and thinning labours and can also save seeds. According to the results, there were significant differences on the percent germination and day to 50% final germination in accordance with the pelleting polymer. Among the pelleting polymer, gemination of seeds using polynimyl alcohol (PVA) was generally smooth, and followed by polyvinyl pyrrolidone (PVP), hydroxyethyl cellulose (HEC), methyl cellulose (MC), and wteen 80. The germination rate was also different according to the pelleting particulate matters. Generally, percent germination and speed of seed using the mixture of diatomaceous earth, talc and calcium carbonate were higher and faster than using other polleting materials, respectively. Thus, it should be suitable pelleting particulate matter for the pelleting of lettuce seeds. On the other hands germination of seeds using limestone, calcium oxide and benonite were low. The seed size of lettuce after pelleting was 33 times as large as the raw seed size. During the process of seed pelleting, netrient addition induced the decrement on the germination and the delay of germination speed. Also, there was differences in the germinability of pelleted seeds in accordance with the addition of nutrient sources. MS medium was generally lower than monosodium phosphate in inhibition of seed germination. Germination of pelleted seeds after priming was higher than the seeds without the treatment, and also showed the trend of early germination.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.1
• /
• pp.139-143
• /
• 1983

Nicotiana Tabacum L., cv. NC2326, Burley2l and Sohyang seeds were coated with different five materials - zeolite, serpentine, coal briquet ash, serpentine+zeolite and coal briquet ash+zeolite - to investigate the effects of coating on germination. The coating materials had different characteristics and gave varied effects on germination. Among three tobacco varieties, coated seeds of Burley2l showed the most sensitive responses in germination rate of decreasing and delaying at low temperature on seedbed and laboratory tests.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.1
• /
• pp.54-58
• /
• 1988

To define natural embryo growth and germination of the Korean ginseng (Panax ginseng C.A.Meyer) seed, freshly harvested and depulped seeds were seeded on nursery bed at Aug. 5 without stratification. At 100 days after seeding, embryo/endosperm length ratio of the seeds in nursery bed was higher than that of the seeds which were stratified with conventional method for 100 days. And also there was no significant difference between dehiscence ratio of the seeds in nursery bed and that from stratification with sand. The germination ratio of the ginseng seeds seeded without stratification at Aug. 5 was about 57% in average of 2 years and was not significantly lower than that of the seeds seeded after stratification at Nov. 15. And there were also no significant differencies of plant growth after germination between the ginseng seedlings from two seeding methods.